E90Post
 


The Tire Rack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > N54 misfire/hesitation between 2500 and 4500 rpm



Reply
 
Thread Tools Search this Thread
      12-31-2014, 07:19 PM   #1
911Mick
New Member
1
Rep
5
Posts

Drives: E90 335i
Join Date: Dec 2014
Location: Sydney, Australia

iTrader: (0)

N54 misfire/hesitation between 2500 and 4500 rpm

I have a 2008 N54 335i with about 75k miles. It recently developed a misfire/hesitation between 2500 and 4500rpm. It is an auto but the misfire is most prominent when I hold full throttle in a high gear. Above 4500rpm the engine runs fine all the time.

I had similar misfire issues about 5k miles ago and replaced the coils and plugs which fixed the issues. The car has a JB4 and the issue is there with the JB4 off but is less severe.

I don't get any fault codes.

Anyone have any ideas? Given the problem happens in the mid range, it seems like another electrical problem but given the coils and plus are fairly new, it seems unlikely?

The car idles like a clock and outside of the 2500-4500 rpm range, runs absolutely fine.
Appreciate 0
      12-31-2014, 07:55 PM   #2
Ingeniator
Major
Ingeniator's Avatar
Canada
34
Rep
1,093
Posts

Drives: 07 335XI(90) 09 135I(82)
Join Date: Nov 2013
Location: Fort Mac, Alberta

iTrader: (1)

Quote:
Originally Posted by 911Mick View Post
I have a 2008 N54 335i with about 75k miles. It recently developed a misfire/hesitation between 2500 and 4500rpm. It is an auto but the misfire is most prominent when I hold full throttle in a high gear. Above 4500rpm the engine runs fine all the time.

I had similar misfire issues about 5k miles ago and replaced the coils and plugs which fixed the issues. The car has a JB4 and the issue is there with the JB4 off but is less severe.

I don't get any fault codes.

Anyone have any ideas? Given the problem happens in the mid range, it seems like another electrical problem but given the coils and plus are fairly new, it seems unlikely?

The car idles like a clock and outside of the 2500-4500 rpm range, runs absolutely fine.
Push it until it throws a code.

Official Misfire Thread
__________________
07 335XI (A008006) 6AT ~94K miles JB4 G5 ISO VSRF DP's
09 135I M (VK80379) 6MT. Race Project car. 1) Install Cobb/piggyback? and Motiv 600 Kit[HTA3076R w/ tial .82] 2) JRZ or Moton suspension. 3) Build high flow intake manifold with multi-port fuel and relocate OFH 4) Build full cage 5) Complete staged twin setup with HTA4205R [w/Tial 1.16] 6) Complete dry sump system
Appreciate 0
      12-31-2014, 07:56 PM   #3
335NJ
Colonel
United_States
535
Rep
2,872
Posts

Drives: 2008 335i 6MT E90
Join Date: Feb 2014
Location: NJ/Philadelphia Suburbs

iTrader: (1)

Did the misfire go away after replacing the plugs/coils at all? Which type of plugs are you using?

I'd say try to get a log of it happening without going crazy risking damage or something. It could be fuel related too, which a log may help us see.
__________________
BSM E90 6MT-JB4 G5 ISO-BMS DCI-Golf-Tee Mod-Hankook S1N2 Non-RFT-ER Chargepipe/TiAL BOV-E40 blend-VRSF V2's-M3 CDV-MHD/JB4 FLASH-VRSF 5" STEPPED FMIC
Appreciate 0
      12-31-2014, 08:51 PM   #4
911Mick
New Member
1
Rep
5
Posts

Drives: E90 335i
Join Date: Dec 2014
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by 335NJ View Post
Did the misfire go away after replacing the plugs/coils at all? Which type of plugs are you using?

I'd say try to get a log of it happening without going crazy risking damage or something. It could be fuel related too, which a log may help us see.
I haven't tried replacing plugs and could again because they are so new. It will not throw a code, no matter how long I push it for.

I have pulled the JB4 off to see if that was the issue. I will put it back on and try to take some logs.
Appreciate 0
      12-31-2014, 11:09 PM   #5
The1ontop
Second Lieutenant
The1ontop's Avatar
United_States
12
Rep
228
Posts

Drives: 2007 335i E92
Join Date: Nov 2013
Location: Maryland

iTrader: (0)

Injectors would most likely be your culprit if you only have 5k miles on plugs and coils
Appreciate 0
      12-31-2014, 11:10 PM   #6
The1ontop
Second Lieutenant
The1ontop's Avatar
United_States
12
Rep
228
Posts

Drives: 2007 335i E92
Join Date: Nov 2013
Location: Maryland

iTrader: (0)

No way around it lol I did mine at 70k took me about 1 hr for all 6 plus to code them
Appreciate 0
      12-31-2014, 11:20 PM   #7
Fun w/N54
Lieutenant
United_States
40
Rep
592
Posts

Drives: '11 E92 335is AW/CR/DCT
Join Date: Apr 2011
Location: WI

iTrader: (2)

Quote:
Originally Posted by 911Mick
I have a 2008 N54 335i with about 75k miles. It recently developed a misfire/hesitation between 2500 and 4500rpm. It is an auto but the misfire is most prominent when I hold full throttle in a high gear. Above 4500rpm the engine runs fine all the time.

I had similar misfire issues about 5k miles ago and replaced the coils and plugs which fixed the issues. The car has a JB4 and the issue is there with the JB4 off but is less severe.

I don't get any fault codes.

Anyone have any ideas? Given the problem happens in the mid range, it seems like another electrical problem but given the coils and plus are fairly new, it seems unlikely?

The car idles like a clock and outside of the 2500-4500 rpm range, runs absolutely fine.
If it hasn't been done then get the valves blasted. Also have you used a BT tool or Cobb to look for shadow codes. Not all codes will show with standard OBDII reader.

Good luck.
__________________
Evolution Racewerks FMIC and Charge Pipe with TIAL-Q.
Wedge Tuned 93 Oct, K&N Panel, Conti DWS 245/275.
Appreciate 0
      12-31-2014, 11:31 PM   #8
335NJ
Colonel
United_States
535
Rep
2,872
Posts

Drives: 2008 335i 6MT E90
Join Date: Feb 2014
Location: NJ/Philadelphia Suburbs

iTrader: (1)

Quote:
Originally Posted by 911Mick View Post
I haven't tried replacing plugs and could again because they are so new. It will not throw a code, no matter how long I push it for.

I have pulled the JB4 off to see if that was the issue. I will put it back on and try to take some logs.
You're using the correct plug right?
Appreciate 0
      01-01-2015, 03:56 AM   #9
911Mick
New Member
1
Rep
5
Posts

Drives: E90 335i
Join Date: Dec 2014
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by 335NJ View Post
You're using the correct plug right?

The correct plug for what?
Appreciate 0
      01-01-2015, 06:21 AM   #10
911Mick
New Member
1
Rep
5
Posts

Drives: E90 335i
Join Date: Dec 2014
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by 911Mick View Post
The correct plug for what?
Oh…I'm a bit slow today, you mean the correct spark plug? Yeah, I am using the OE Bosch plugs
Appreciate 0
      07-05-2015, 06:02 PM   #11
TemjinX2
Major
529
Rep
1,493
Posts

Drives: 2008 335xi e92
Join Date: Dec 2009
Location: Socal OC

iTrader: (0)

sorry to bring up a old thread. did this ever get resolved? i'm having similar issues.
Appreciate 0
      07-07-2015, 09:20 AM   #12
911Mick
New Member
1
Rep
5
Posts

Drives: E90 335i
Join Date: Dec 2014
Location: Sydney, Australia

iTrader: (0)

Yep - it was a bad coil
Appreciate 0
      07-07-2015, 11:55 AM   #13
mike@x-ph.com
BimmerPost Supporting Vendor
mike@x-ph.com's Avatar
United_States
27324
Rep
196,604
Posts


Drives: 07-335/12-328/18-M4/21-M4CP
Join Date: Sep 2013
Location: Las Vegas

iTrader: (23)

Quote:
Originally Posted by 911Mick View Post
Yep - it was a bad coil
Glad that you got it figured out
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/

Phone number 702-494-9435
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:34 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST