|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
[turb0mik3] Project Racecar <Phase 1 - 3>
|
 |
| 01-03-2015, 04:18 PM | #1 |
247
Rep 2,781
Posts
Drives: E90 335i Racecar
Join Date: Jan 2010
Location: San Diego, CA
|
[turb0mik3] Project Racecar <Phase 1 - 3>
Hello e90post,
As a preface, I would like to thank all of the friends and members of bimmerpost who have supported me throughout my entire build. I take extreme pride in the fact that I bought this car new in 2010 and have put my hard earned money, time, and efforts into building for a purpose; racing. I am extremely grateful for all of the advice, praise, and feedback (both positive and negative) that I have received over the past five years. Over the past couple of years I have really tried to push the limits of the 335i platform. Not in terms of tuning, but in terms of what the 335i can represent in the motorsports community. Yes, it can be a great freeway and mountain carving machine, but can it really compete with the M3s, Corvettes, and Porsches on the racetrack? Every track day is a learning experience, filled with success and failure. I have so much more to learn, but I do find great joy in keeping up with those cars known for their on-track performance compared to my family saloon. After five long years and almost 50,000 miles, I have made the decision to convert my 335i into a full blown racecar. The car will travel across the nation and compete in various style races ranging from time attacks to professional series. My goal is to win the overall points in the Global Time Attack Pro-Am series and to compete in NASA, SCCA, and BMW CCA clubsport races. In order to achieve these goals, the car will go through a vigorous three stage process. All three stages will be listed below in great detail. I would like to also thank all of the sponsors (and friends) that have graciously given me discounted prices for products, hours of hard labor, and guidance in my quest to become a better driver. SPONSORS: HG Motorsports: Providing all labor, fabrication, labor, transportation, paying for events, car event showcases. Sabelt: Providing all seats, harnesses, safety equipment components. BBS: Providing all wheel components Sparta Evolution: Providing all brake components. APR Performance: Providing all aerodynamic components. Motiv Motorsport: Providing all turbocharging/power components Toyo Tires: Providing the stickiest tires. Vollkommen Designs: Providing all body panels Event Sponsors: Speed District, Shift S3ctor, Targa Trophy, Global Time Attack Here is the stage breakdown as a teaser: Phase 1: Cage, weight reduction, safety, communication, aero Phase 2: Motiv 750 ST, advanced cooling, intake system, exhaust system Phase 3: Suspension overhaul, all adjustable components PHASE 1: NASA/BMW CCA Roll Cage 8 point (into firewall) -X door bar - Subframe reinforced - Seat spine - Longacre roll-cage padding - Rearview Mirror - CAE Shifter Weight Reduction - Carbon Fiber Roof <IND> - Lexan - Electrical system removal - A/C system removal Fire Safety - Sabelt ESMAG-21 system <Sabelt> Communication - 5W 2-way Pro-Digital system <SRC> - 2XR Driver-Codriver kit <SRC> - Custom ear-buds Aero - Rear blown diffuser <APR> - Front canards/side plates - Hood vents                <1/14/2015 Update> A little more progress... Car was in a mess of wires for a good week. Finally all wires are sorted and ones that weren't needed were cut out. Base plate for the cross brace was tig welded in and an opening for the shock tower was created out of a spacer/bracket that my fab guy miraculously found. Main hoop was created and fits like a glove. IND Carbon roof should be arriving late next week. I went with a 1x1 weave although my splitter and wing are 2x2. Hopefully I won't regret that decision.   IMG_3265 by turb0mik3, on Flickr  IMG_3264 by turb0mik3, on Flickr IMG_3261 by turb0mik3, on Flickr IMG_3262 by turb0mik3, on Flickr IMG_3258 by turb0mik3, on Flickr IMG_3259 by turb0mik3, on Flickr IMG_3260 by turb0mik3, on Flickr IMG_3257 by turb0mik3, on Flickr IMG_3272 by turb0mik3, on Flickr IMG_3273 by turb0mik3, on Flickr IMG_3271 by turb0mik3, on FlickrAnd a look at her as she sits...  IMG_3267 by turb0mik3, on Flickr<Update 1/24/14> More progress... Cage is starting to take shape. The main hoop, a pillars, 2 cross sections in the main hoop, halo, rear section, and rear cross bar. I can't emphasis how much progress my fabricator is making; putting some blood sweat and tears into this build! There are a lot of differences in this cage compared to others for structural rigidity. It's the little differences that make the big differences. Hope you all enjoy!  IMG_3361 by turb0mik3, on Flickr IMG_3362 by turb0mik3, on Flickr IMG_3363 by turb0mik3, on Flickr IMG_3368 by turb0mik3, on Flickr IMG_3369 by turb0mik3, on Flickr IMG_3370 by turb0mik3, on Flickr IMG_3371 by turb0mik3, on Flickr IMG_3372 by turb0mik3, on Flickr IMG_3373 by turb0mik3, on Flickr IMG_3374 by turb0mik3, on Flickr IMG_3375 by turb0mik3, on Flickr IMG_3376 by turb0mik3, on Flickr IMG_3377 by turb0mik3, on Flickr IMG_3378 by turb0mik3, on Flickr<UPDATE 2/17/15> Door bars and seat are in. All tac welds are full tig welds... Chassis reinforcement up next... she looks good on the ground :-)  IMG_3498 by turb0mik3, on Flickr IMG_3499 by turb0mik3, on Flickr IMG_3500 by turb0mik3, on Flickr IMG_3502 by turb0mik3, on Flickr IMG_3503 by turb0mik3, on Flickr IMG_3504 by turb0mik3, on Flickr IMG_3505 by turb0mik3, on Flickr IMG_3506 by turb0mik3, on Flickr IMG_3507 by turb0mik3, on Flickr IMG_3512 by turb0mik3, on Flickr IMG_3520 by turb0mik3, on Flickr IMG_3521 by turb0mik3, on Flickr IMG_3523 by turb0mik3, on Flickr IMG_3524 by turb0mik3, on Flickr image8 by turb0mik3, on Flickr image7 by turb0mik3, on Flickr image6 by turb0mik3, on Flickr image5 by turb0mik3, on Flickr image4 by turb0mik3, on Flickr image3 by turb0mik3, on Flickr image2 by turb0mik3, on Flickr image1 by turb0mik3, on Flickr IMG_3463 by turb0mik3, on Flickr IMG_3464 by turb0mik3, on Flickr IMG_3465 by turb0mik3, on Flickr IMG_3520 by turb0mik3, on Flickr Plate by turb0mik3, on FlickrLast edited by turb0mik3; 02-18-2015 at 01:22 AM.. |
| 01-03-2015, 04:19 PM | #2 |
|
247
Rep 2,781
Posts
Drives: E90 335i Racecar
Join Date: Jan 2010
Location: San Diego, CA
|
Reserved for Stage 2
|
|
Appreciate
0
|
| 01-03-2015, 04:20 PM | #3 |
|
247
Rep 2,781
Posts
Drives: E90 335i Racecar
Join Date: Jan 2010
Location: San Diego, CA
|
Reserved for Stage 3
|
|
Appreciate
0
|
| 01-03-2015, 04:40 PM | #5 |
|
Banned
1524
Rep 4,743
Posts
Drives: S65 1M Clone & E92 M3 4.6L
Join Date: Apr 2011
Location: San Francisco
|
gonna be good - subscribed.
|
|
Appreciate
0
|
| 01-03-2015, 04:58 PM | #6 |
|
Lieutenant General
 
764
Rep 10,033
Posts |
Sub'd
 Mike, this is going to be sooooo sickkk. Your car has always been an inspiration for me and I can't wait to see the finished look!!! 
__________________
 TiAg FTW! |
|
Appreciate
0
|
| 01-03-2015, 08:30 PM | #9 |
|
Lieutenant
 
31
Rep 452
Posts |
Awwwweeee yeeeeaaaaa
__________________
GIAC, Alpina TCU Flash, Ohlins, Brembo, Eisenmann, Quaife, Evolution Racewerks, Wagner Tuning, AFE, M3 suspension bits
|
|
Appreciate
0
|
| 01-03-2015, 08:43 PM | #10 |
|
Second Lieutenant
40
Rep 213
Posts |
Awesome!!! You sir, are a pioneer.
__________________
AW E92 M3 DCT /// |
|
Appreciate
0
|
| 01-03-2015, 08:47 PM | #11 |
|
Captain
233
Rep 646
Posts
Drives: 2010 E92 335i
Join Date: Apr 2008
Location: Goleta, CA
|
Seems like this is going to be quite a build. Can't wait to see what you do with this.
|
|
Appreciate
0
|
| 01-03-2015, 11:22 PM | #12 |
|
DIYER
638
Rep 5,521
Posts |
I have one word......RESPECT
__________________
JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
|
|
Appreciate
0
|
| 01-03-2015, 11:44 PM | #13 |
|
Colonel
 
375
Rep 2,838
Posts
Drives: e92 335i, e34 525i & e60 530i
Join Date: Aug 2011
Location: N Las Vegas
|
Ah damn, I thought your car was complete. Can't wait to see this. Wish I had more time and dedication to put in the sport
 . Can't wait to see it on the track.
__________________
|
|
Appreciate
0
|
| 01-04-2015, 04:32 AM | #16 |
|
Brigadier General
1304
Rep 4,180
Posts |
Subbed... Always been impressed by you and your rig, Mike. Really excited to see not only this build but your progress as a racer. Godspeed.
|
|
Appreciate
0
|
| 01-05-2015, 12:10 PM | #18 |
|
BimmerPost Supporting Vendor
27320
Rep 196,601
Posts  |
This is very exciting
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435  |
|
Appreciate
0
|
| 01-06-2015, 12:59 AM | #20 |
|
It's slow
8
Rep 64
Posts |
Ooooo das nice!
__________________
CYBA SCOOPS | K&N FILTER | CHARCOAL DELETE | L.E.D. INTERIOR| BLACK KIDNEYS | REV INTAKE HOSE | JUST GETTING STARTED!  |
|
Appreciate
0
|
| 01-06-2015, 08:02 AM | #21 |
|
Major General
2151
Rep 6,177
Posts |
Wowsers!!!
__________________
When you say impact instead of affect/effect, you are communicating that you don't understand the difference between the two words, and are too lazy to learn.
|
|
Appreciate
0
|
| 01-06-2015, 09:48 AM | #22 |
|
Captain
63
Rep 954
Posts |
nice!
__________________
cp-e GTX3071R TT kit, cp-e quad exhaust, cp-e fuelbar, Stage 3 LPFP+lines, AEM EFI, Custom Meth kit, Apex EC7 18s w/R888 295s, Stoptech, M3 front, m-sport rear, cp-e difuser, Custom Headlights, CFS Radiator, Custom OC, 1000hp Lvl10 trans, DSS Axles, MFactory LSD, DEFIV lockdown kit, M3 refresh kit, KWv2's, cp-e project "4doorbmwpower"
 |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
