|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Cannot read FRM Module in E92 via NCS Expert
|
|
01-29-2015, 06:55 PM | #1 |
Private First Class
23
Rep 141
Posts |
Cannot read FRM Module in E92 via NCS Expert
Guys,
After a recent accident I had to change both my Adaptive Headlights to normal Xenon's (cheaper to source! and AHL not important to me..) I now have the warning lights for 'Adaptive Headlights' on my dashboard... I'm using NCS Expert to connect to my car, can read the 'CAS' fine and code, I've never been able to code my FRM Module and remove option 524 from the VO. I have attached the error message to this thread, if anyone has some older daten files listed below would appreciate if you can send me... (older than v41.. I have tried up to v50.2...)... I'm after these three files: FRM2_E89.C08 (my one shows as 2KB, does not look right to me..) A_PL2FRX.IPO FRM_70.PRG Any tips on coding our AHL for normal Xenons appreciated..! Regards, Tich.
__________________
|
01-30-2015, 03:26 PM | #3 |
Private First Class
23
Rep 141
Posts |
Thanks for the update! can anyone PM me a link to download v54.0?
appreciated!
__________________
|
Appreciate
0
|
01-30-2015, 03:44 PM | #4 |
Private First Class
23
Rep 141
Posts |
__________________
|
Appreciate
0
|
02-02-2015, 02:49 PM | #5 |
Private First Class
23
Rep 141
Posts |
Update
The newer daten files did not fix the issue, I finally figured it out!
I had to set the VO date to #0906, then I saw 'FRM', clicked on it and then coded module back after removing 524 (AHL). All fine now, no more 'Adaptive Headlight' or 'Cornering Lights' error! Hope this helps someone with similar issues coding the FRM/NFRM module. Regards, Tich.
__________________
|
Appreciate
0
|
Bookmarks |
|
|