|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Please help with log- Boost question
|
|
02-19-2015, 12:09 PM | #1 |
Private First Class
11
Rep 117
Posts |
Please help with log- Boost question
Problem; boost appeared to mostly dissapear (from OFT guage and it using fuel gauge- erratically going from 0-4psi only)
After downloading the OFT update Tuesday night and uploading stage 2 bin to it and then the car, it doesn't seem to show the right "boost" on the device in real time or on the fuel guage any longer... it worked fine before I updated it this week. This morning, I did a few seconds of WOT and had the OFT log/record,,, and it's showing on the log (start at time: 10.35) that boost went from 3.54 up to 14.86 settled around 12.5-13 and then tapered down 9.97, then a AT gear change and boost rose up to 14.7. (after i let off, it quickly spiked but target was way lower) this was on the OFT stage 1 bin (I had changed it back to stage 1 last night thinking there was a glitch on stage 2.... Stage 1 before my "template upate" worked fine and the boost gauge on the OFT and fuel guage worked fine... what's wrong? (I was about to go buy new boost solenoids...lol because the OFT was saying boost was erratically going from 0-4psi...) I think I've uploaded the log taken from the OFT successfully on here as an attachment so people that know how to read them can tell me what they are seeing. thank you!!
__________________
Tommy
2013 M6 Coupe- Tanzanite blue |
02-19-2015, 12:17 PM | #2 |
Private First Class
11
Rep 117
Posts |
hopefully there is an attachment this time. the first one doesn't look like it did.. so i did cut/paste to a word doc and saved as a jpg file.. so hopefully it worked htis time.
__________________
Tommy
2013 M6 Coupe- Tanzanite blue |
Appreciate
0
|
02-19-2015, 12:23 PM | #3 |
BimmerPost Supporting Vendor
27439
Rep 196,865
Posts |
Nope no attachment
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
02-19-2015, 01:23 PM | #5 |
Private First Class
11
Rep 117
Posts |
I just talked to Robert at Procede and it sounds like my car is fine,,, that this time with OFT and Procede V3, the canbus thingy is making the OFT real time read-out show the boost wrong even though it's really OK. He's going to look at the log to verify everything is working as it should... whew..
i was all ready to start tracking down boost or vacuum leaks, purchase new boost solenoids, and contort my body to adjust wastegate actuator arms... (i might check those anyway for for fun)
__________________
Tommy
2013 M6 Coupe- Tanzanite blue |
Appreciate
0
|
02-19-2015, 02:10 PM | #6 |
The Wolf
273
Rep 1,013
Posts
Drives: stuff
Join Date: Oct 2013
Location: Midwest
|
you would know if the boost was low, the car is a SLUG with no boost.
__________________
-2019 BMW m850i convertible
-2021 Dodge Charger Hellcat Redeye Widebody |
Appreciate
0
|
Bookmarks |
|
|