|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
Codes, but no Limp with V2...Need help
|
 |
| 01-28-2008, 04:26 PM | #1 |
|
Private First Class
 
8
Rep 167
Posts |
Codes, but no Limp with V2...Need help
Gents,
After V-2 install, I'm getting codes 237 and 335 but don't have any other indications (i.e. limp mode, lack of power, knocks, etc). I've restarted multiple time and put 100+ miles on the car, but the codes remain. Has any one else experienced this? Also- and I don't know if the two are related- the Procede reader software datalogs don't show boost. I can't seem to find the "boost" read-out anywhere. I see RPM, Load Index, Fuel Cor, Ign Cor, and Road Speed- but no "Boost." Can anyone provide some guidance as to what I have screwed-up? Appreciate any and all help. Thanks. Jon |
| 01-28-2008, 04:31 PM | #2 | |
|
Team Zissou
3182
Rep 10,200
Posts |
You are using the older software, you need to get the V2 software from here:
http://www.vishnutuning.com/Files/BM...eader_v2_0.zip Quote:
|
|
|
Appreciate
0
|
| 01-28-2008, 04:50 PM | #3 | ||
|
اوليسيس
210
Rep 4,677
Posts |
Quote:
which more than likely means you loaded the new map with the old software, big no-no. upgrade to the new software with the new firmware and map, 1/10/08. edit: new firmware and map here: http://www.vishnutuningforum.com/for...75&postcount=1 just in case.
__________________
Quote:
 <---Sign up Now for Bonus Storage! Up to 10gb! |
||
|
Appreciate
0
|
| 01-28-2008, 05:57 PM | #4 |
|
Private First Class
8
Rep 167
Posts |
On Vishnu's website, the newest software listed is 1.1.
That makes sense- old software. Luckily, I didn't load any maps or anything to the Procede through the old software yet. Shiv or Dustin (or anyone else), Any advice on the 237 and 335 codes with no limp mode?? Thanks for the help guys. Jon |
|
Appreciate
0
|
| 01-28-2008, 07:37 PM | #5 |
|
Lieutenant
46
Rep 428
Posts |
If you are not experiencing a limp mode, then I would suggest that these codes are probably from an incorrect firmware update. Knowing your history regarding firmware updates, I would be willing to bet that these are stored codes from when you tried to start the car with the bad firmware load. If this is the case, you can clear everything, and be on your merry way.
If you need any further help, just shoot me a PM.  |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
