[Smonkey09]

Hey all. I finished my DPF delete and tune and I have a few codes that I think relate to me screwing up somewhere and missing plugging something in. I'm hopeful the community can take a peek at my codes and let me know.

Here are the codes:

<===========================>
4. Instrumentation:
<--------------------------->
Instrument cluster / Kombiinstrument:
- Fault: CAN signal fault terminal
- Code: 00A3B2
- Fault: Tank level error
- Code: 009319
- Fault: Tank level error
- Code: 00931A
<===========================>
6. Heating / AC:
<--------------------------->
Air conditioning / Klimaanlage:
- Fault: Can-terminal status message
- Code: 00E714
<===========================>

13. Systems:
<--------------------------->
Junction Box Passenger / Beifahrer:
- Fault: Internal error of the sensor - K-LIN 6 xAUC sensor
- Code: 00A6CF
- Fault: Central control timeout
- Code: 009C5E
- Fault: :Terminal status timeout / K-Can failure
- Code: 00C91E

[NickTheStick]

Completely and utterly OT, but who did your DPF delete in the area?

[Hoooper]

Have you tried resetting the codes and checking again? I've had codes come up when disconnecting or messing with things that cleared after and never came back. If those were current codes you would have noticeable instrumentation issues

[Smonkey09]

Originally Posted by NickTheStick

Completely and utterly OT, but who did your DPF delete in the area?

I did. It actually was quite fun. Check other threads for basically step-by-step instructions with pictures.

Originally Posted by Hoooper

Have you tried resetting the codes and checking again? I've had codes come up when disconnecting or messing with things that cleared after and never came back. If those were current codes you would have noticeable instrumentation issues

I took it for a little test drive last night after installing ECU and had no codes. Drove it (hard) to work today and got these codes by time I arrived. I'll clear codes before drive home from work and see what I get when I get home.

[Smonkey09]

Thanks Hoooper. Cleared codes before I started driving home. When I got home and checked again, no codes.

[Smonkey09]

FYI, I heard from someone that these codes are common when you have spiderboot installed, and they go away once you clear them.

[Hoooper]

Interesting. Well its good to know that they just go away after the reset. I dont think those cause an issue anyway as ghost codes, but it could make for a confusing diagnosis if anything went wrong in the future if they didnt go away.