BMW Coding Tool Question

wildcatcrazy · 05-01-2015, 01:56 PM

Coders, I've been coding for a little bit now, but I've never ran across this issue before.

After reading the module with NCS, I open the TRC file with the Coding Tool and as soon as I select Show Values I get an error similiar to "not all values valid". I've always had this issue with 3 maybe 4 values within a module, then I just open up the TRC file, delete those lines, then reload the TRC and press on with coding.

But, this time, there are way too many values/lines with this issue, so I know there's something else going on.

Here is what I know about this particular case. Remote install on a Windows 8 64 bit PC (which I've done numerous times before), tried both DATENs 53.3 and 55, used the proper profile in NCS, all modules are originals (even upgraded/flashed FRM with v55). The only difference with this PC compared to other installs/coding is that the original PC language was Chinese, but I chose English when doing the BMW Standard Tools install. All the other programs (INPA, Tool32, WinKFP) all work with no problem.

I attached a screen shot of the FRM showing some values are good, while others are not. They range from wert values to aktiv/nicht_aktiv. Any ideas fellas?

wildcatcrazy · 05-04-2015, 12:25 PM

Anyone?

LMB335IS · 05-04-2015, 12:45 PM

Quote:

Originally Posted by wildcatcrazy

Anyone?

Have you tried opening that TRC file in NCS Dummy and seeing what values come up?

wildcatcrazy · 05-05-2015, 04:26 AM

Quote:

Originally Posted by LMB335IS

Quote:

Originally Posted by wildcatcrazy

Anyone?

Have you tried opening that TRC file in NCS Dummy and seeing what values come up?

Not yet, I just manually updated the MAN file and coded it that way.

frankhic1 · 03-04-2021, 02:53 PM

Hello
I had an Auto Video/Stereo Shop a camera and an Emulator from Autofocustech in my 328i and they had to do it twice to make it sure it was done correctly however, they never had code it before for the activation. I understand you have done several of this for a reasonable fee. I could send you an email with the pictures and models of the parts I'm talking about. Please let me know what I need to buy>also when can do it and if you do it remote. I live in Stockton, CA and I cannot find anyone around here who knows how to do it.
Thank you so much
Frankhi

05-01-2015, 01:56 PM	#1
wildcatcrazy Banned 529 Rep 1,527 Posts Drives: E90 335i Join Date: Oct 2013 Location: USA iTrader: (12) Garage List 2009 335i [0.00]	BMW Coding Tool Question Coders, I've been coding for a little bit now, but I've never ran across this issue before. After reading the module with NCS, I open the TRC file with the Coding Tool and as soon as I select Show Values I get an error similiar to "not all values valid". I've always had this issue with 3 maybe 4 values within a module, then I just open up the TRC file, delete those lines, then reload the TRC and press on with coding. But, this time, there are way too many values/lines with this issue, so I know there's something else going on. Here is what I know about this particular case. Remote install on a Windows 8 64 bit PC (which I've done numerous times before), tried both DATENs 53.3 and 55, used the proper profile in NCS, all modules are originals (even upgraded/flashed FRM with v55). The only difference with this PC compared to other installs/coding is that the original PC language was Chinese, but I chose English when doing the BMW Standard Tools install. All the other programs (INPA, Tool32, WinKFP) all work with no problem. I attached a screen shot of the FRM showing some values are good, while others are not. They range from wert values to aktiv/nicht_aktiv. Any ideas fellas? Attached Images
	Appreciate 0 Tweet Quote

05-04-2015, 12:25 PM	#2
wildcatcrazy Banned 529 Rep 1,527 Posts Drives: E90 335i Join Date: Oct 2013 Location: USA iTrader: (12) Garage List 2009 335i [0.00]	Anyone?
	Appreciate 0 Quote

03-04-2021, 02:53 PM	#5
frankhic1 New Member 0 Rep 7 Posts Drives: 2012 BMW 328i coupe Join Date: Sep 2020 Location: Stockton, California iTrader: (0)	Coding Hello I had an Auto Video/Stereo Shop a camera and an Emulator from Autofocustech in my 328i and they had to do it twice to make it sure it was done correctly however, they never had code it before for the activation. I understand you have done several of this for a reasonable fee. I could send you an email with the pictures and models of the parts I'm talking about. Please let me know what I need to buy>also when can do it and if you do it remote. I live in Stockton, CA and I cannot find anyone around here who knows how to do it. Thank you so much Frankhi
	Appreciate 0 Quote