|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
FS: JB4 G4, STETT Intake, Performance shifter
|
|
05-02-2015, 01:00 PM | #1 |
Lieutenant
16
Rep 446
Posts |
FS: JB4 G4, STETT Intake, Performance shifter
Alright guys sold my 335i and upgraded to an e90 m3! so I'm selling off some mods.
JB4 G4 Upgraded to the latest firmware, comes with the USB cable, works flawlessly! SOLD BMW Performance shifter with Alcantara boot (Night and day compared to the OEM one, loved it). SOLD STETT Intake, white, has 2 small scuffs, paint touch up will fix the job. Awesome intake, sits lower behind the front bumper driver side so it doesn't pick up any of the hot air from the engine. Pic added, Comes with clamps. SOLD The first and STILL the best. The STETT Performance N54 335i Cold Air Intake allows for much faster turbo spool and horsepower gains up by removing the factory restrictive airbox and feeding your turbos much cooler air. It's a widely known fact that colder air makes more horsepower than hotter air, So why would one want to put two cone filters on top of a hot engine in a hot engine bay, where, temperatures can easily reach twice that of the air outside of the car? Exactly. Hand made from mandrel bent 100% 304 stainless steel, this baby was designed to make power and power it does make. How does over 20+hp sound? And if the horsepower gain wasn't enough for you, the cool sound of your turbos spooling up will put a grin on your face. - Filter is located in cool location behind bumper not in hot air under hood - No fender liner cutting or bulges - No tire clearance issues (even with lowered cars) - High quality 304 stainless steel - 15%+ larger high flow filter than the competition - Works excellent with modified turbos Last edited by whip_lash; 05-25-2015 at 01:27 PM.. |
05-04-2015, 10:43 AM | #9 |
Lieutenant
16
Rep 446
Posts |
Pic added, has a scuff from sitting on the plastic part on the lower part behind the bumper, wouldn't even bother painting this, clamps come with it as well (not in pic).
|
Appreciate
0
|
05-08-2015, 09:14 AM | #13 |
Lieutenant
16
Rep 446
Posts |
JB4 sold, STETT intake remaining! Some info on it
The first and STILL the best. The STETT Performance N54 335i Cold Air Intake allows for much faster turbo spool and horsepower gains up by removing the factory restrictive airbox and feeding your turbos much cooler air. It's a widely known fact that colder air makes more horsepower than hotter air, So why would one want to put two cone filters on top of a hot engine in a hot engine bay, where, temperatures can easily reach twice that of the air outside of the car? Exactly. Hand made from mandrel bent 100% 304 stainless steel, this baby was designed to make power and power it does make. How does over 20+hp sound? And if the horsepower gain wasn't enough for you, the cool sound of your turbos spooling up will put a grin on your face. - Filter is located in cool location behind bumper not in hot air under hood - No fender liner cutting or bulges - No tire clearance issues (even with lowered cars) - High quality 304 stainless steel - 15%+ larger high flow filter than the competition - Works excellent with modified turbos |
Appreciate
0
|
Bookmarks |
|
|