Walnut Blasting STL

Tbeaz88 · 05-20-2015, 11:17 AM

Anyone in STL have the equipment to do this? I need the walnut blaster have everything else. A case of beer will be donated!!

whosdady · 05-27-2015, 10:24 AM

Quote:

Originally Posted by Tbeaz88

Anyone in STL have the equipment to do this? I need the walnut blaster have everything else. A case of beer will be donated!!

I had mine done at Plaza...I couldn't find anyone else.

Tbeaz88 · 05-28-2015, 01:42 PM

Quote:

Originally Posted by whosdady

Quote:

Originally Posted by Tbeaz88

Anyone in STL have the equipment to do this? I need the walnut blaster have everything else. A case of beer will be donated!!

I had mine done at Plaza...I couldn't find anyone else.

How much did they charge??

mkretsinger · 10-24-2015, 11:51 AM

I know this is an older thread, but for future reference ...

I used to take my car to Plaza and every time they kept it for a week and couldn't diagnose my issue and replaced something that didn't need to be replaced and it cost me thousands. This includes the walnut blasting (which I did actually need, but they overcharged me for it).

This past week, I took it to Bavarian for the first time. Not only did they diagnose my problem in minutes, they fixed it the same day and were extremely reasonable on price.

I didn't have them do the walnut blasting, but I know that they offer that service and it's much much cheaper than Plaza.

I'm so happy to have my car performing at the top of it's game again!

hectorh · 10-28-2015, 10:05 PM

I just took my car to BimmersRUs. Costs $700.

whosdady · 04-26-2016, 07:32 AM

Quote:

Originally Posted by hectorh

I just took my car to BimmersRUs. Costs $700.

Ouch $700 is terrible. Several guys on these forums (around the country) have posted $350 for the exact same service. Hopefully they have down in price since you had this performed...

agustincuenca · 05-23-2016, 05:07 PM

You can try Bradley Motor Werke, they are really good and not bad on prices. The only time I got a walnut blast done was covered under warranty on West County BMW.

Tbeaz88 · 09-14-2016, 10:55 PM

thanks for the replies, I have heard bad things about Bradely's. I think I might just try and tackle it myself. Would anyone want their car done in the near future?

McLovin335i · 09-30-2016, 02:56 PM

I would be curious if anyone can do the media blasting in the Springfield area...

wren57 · 09-30-2016, 03:30 PM

I'm moving to Edwardsville, IL in January, can do it for a reasonable fee for anyone after my move...

Tbeaz88 · 09-30-2016, 03:31 PM

Quote:

Originally Posted by wren57

I'm moving to Edwardsville, IL in January, can do it for a reasonable fee for anyone after my move...

When you get here hit us up, do you already have the equipment?? I would be interested in helping you out. Also I own a detail business here if anyone is interested

wren57 · 09-30-2016, 03:45 PM

Quote:

Originally Posted by Tbeaz88

When you get here hit us up, do you already have the equipment?? I would be interested in helping you out. Also I own a detail business here if anyone is interested

Yeah I have all the equipment. Have done it on two personal N54s and a few friends as well. It's a time consuming PITA job but easy enough once you get the hang of it.

AndyP.711 · 08-07-2020, 03:19 AM

Quote:

Originally Posted by wren57

Quote:

Originally Posted by Tbeaz88

When you get here hit us up, do you already have the equipment?? I would be interested in helping you out. Also I own a detail business here if anyone is interested

Yeah I have all the equipment. Have done it on two personal N54s and a few friends as well. It's a time consuming PITA job but easy enough once you get the hang of it.

Just saw this, I'm in alton, any chance you could still get this done for someone 4 years later lmao

alep85 · 11-22-2020, 05:31 PM

Quote:

Originally Posted by AndyP.711

Just saw this, I'm in alton, any chance you could still get this done for someone 4 years later lmao

Just call Bavarian, they're on Delmar in STL.

Skoidat69 · 04-13-2021, 05:01 PM

Quote:

Originally Posted by alep85

Quote:

Originally Posted by AndyP.711

Just saw this, I'm in alton, any chance you could still get this done for someone 4 years later lmao

Just call Bavarian, they're on Delmar in STL.

Jon at Kinetic just ran a special for $450

05-20-2015, 11:17 AM	#1
Tbeaz88 Private 9 Rep 91 Posts Drives: E92 335i Black on Black Join Date: May 2015 Location: St. Louis iTrader: (1)	Walnut Blasting STL Anyone in STL have the equipment to do this? I need the walnut blaster have everything else. A case of beer will be donated!!
	Appreciate 0 Tweet Quote

10-24-2015, 11:51 AM	#4
mkretsinger Registered 1 Rep 4 Posts Drives: 2007 335i Convertible Join Date: Oct 2015 Location: St. Louis, MO iTrader: (0)	St. Louis BMW Service I know this is an older thread, but for future reference ... I used to take my car to Plaza and every time they kept it for a week and couldn't diagnose my issue and replaced something that didn't need to be replaced and it cost me thousands. This includes the walnut blasting (which I did actually need, but they overcharged me for it). This past week, I took it to Bavarian for the first time. Not only did they diagnose my problem in minutes, they fixed it the same day and were extremely reasonable on price. I didn't have them do the walnut blasting, but I know that they offer that service and it's much much cheaper than Plaza. I'm so happy to have my car performing at the top of it's game again!
	Appreciate 0 Quote

10-28-2015, 10:05 PM	#5
hectorh New Member 0 Rep 23 Posts Drives: 2011 335is Join Date: Jul 2015 Location: Saint Louis, MO area iTrader: (0)	Walnut Blasting in StL I just took my car to BimmersRUs. Costs $700.
	Appreciate 0 Quote

05-23-2016, 05:07 PM	#7
agustincuenca First Lieutenant 154 Rep 343 Posts Drives: 2008 E90 335i; 2016 F80 M3 Join Date: Sep 2014 Location: S Louis iTrader: (0) Garage List 2016 BMW M3 [0.00] 2008 BMW 335i [0.00]	You can try Bradley Motor Werke, they are really good and not bad on prices. The only time I got a walnut blast done was covered under warranty on West County BMW.
	Appreciate 0 Quote

09-14-2016, 10:55 PM	#8
Tbeaz88 Private 9 Rep 91 Posts Drives: E92 335i Black on Black Join Date: May 2015 Location: St. Louis iTrader: (1)	thanks for the replies, I have heard bad things about Bradely's. I think I might just try and tackle it myself. Would anyone want their car done in the near future?
	Appreciate 0 Quote

09-30-2016, 02:56 PM	#9
McLovin335i Private 9 Rep 48 Posts Drives: 2010 335i Join Date: Sep 2016 Location: Springfield MO iTrader: (0)	I would be curious if anyone can do the media blasting in the Springfield area...
	Appreciate 0 Quote

09-30-2016, 03:30 PM	#10
wren57 Roll Tide 605 Rep 2,363 Posts Drives: 335i Join Date: Jul 2010 Location: St Louis iTrader: (10)	I'm moving to Edwardsville, IL in January, can do it for a reasonable fee for anyone after my move... __________________ Fix your broken/stripped cowl bolts with this elegant brass solution! http://www.e90post.com/forums/showthread.php?p=20230306
	Appreciate 0 Quote