|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
another fitment/fender clearance question
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
06-02-2015, 04:01 PM | #1 |
Private First Class
16
Rep 165
Posts
Drives: 2015 F80 M3
Join Date: Apr 2015
Location: Dirty South
|
another fitment/fender clearance question
So, I have another one for the pros on here.
Again, I did research, and I found some similar numbers... I even sent a few PM's to people who posted, but no replies as of yet. I am looking at this package: Wheel/Tire Specs: 19" Avant Garde 19x9 et 35 FR and 19x10 et 38 RR 245/35/19 and 275/30/19 Hankook Evo-2's (added the tires, as I know things like the PSS run wide and can have a serious effect on the calcs. On a 2007 E92, lowered on H7R sports, I am inclined to believe these will fit with no need to roll fenders etc. However, I would really like to confirm that. There is no one local that I can trust to do it, after the experience with my s2000 (I am very OCD about processes, and it took me over 3 hours to roll 2 fenders), I am just not in the game of doing it. I would head to ATL to have someone up there do it, but it's a 3 hours drive and most people want around $250 to do it. So, back to my post... will those fit without rubbing? Thanks in advance. |
06-03-2015, 07:41 AM | #2 |
Private First Class
16
Rep 165
Posts
Drives: 2015 F80 M3
Join Date: Apr 2015
Location: Dirty South
|
50 views and no comments? (insert sad face... LOL).
and I suppose everyone already knew, but I meant H&R sport springs... not H7R. OOPS! |
Appreciate
0
|
06-05-2015, 06:07 PM | #3 |
Major General
236
Rep 5,117
Posts |
It should fit as is. It is only 1.5mm further out than 9.5et33 which is the bolt on fitment many are using. Since you are lowering it is hard to say though.
http://www.willtheyfit.com/index.php...et2=38#content |
Appreciate
1
|
06-08-2015, 01:46 PM | #4 | |
Private First Class
16
Rep 165
Posts
Drives: 2015 F80 M3
Join Date: Apr 2015
Location: Dirty South
|
Quote:
Turns out, I will not be getting these... seller had an offer after mine, but it was local, so the sale went there rather than shipping to me. Back on the hunt.... |
|
Appreciate
0
|
Bookmarks |
|
|