[halcyon026]

BIMMERPOST / Classifieds

Asking Price:

Sold

Location:

✓ Will Ship

Item Interest

Sold.

This was originally the Vishnu (Aquamist) Meth Kit with some upgrades & now has the BMS FSB to work with the JB4. I'm selling my car so I'm parting out the mods.
http://www.procedetuning.com/BMW/n54.../methanol.html

It has been issue free. The pump flows great! All the plug and play connections and fittings are still in place.

It comes with everything you need to run a 2 nozzle setup and trunk mounted tank. All clamps, all wiring, all hoses, all fittings.

A few additions are upgraded T-bolt clamps, great for having leak free higher boost levels, Low Level Sensor and LED (plus wiring), Compression fittings for leak free operation, compression fitting vent for Meth tank lid, custom aluminum frame for tank reduces footprint.





FSB to work with the JB4:



Legitimate metal charge pipe with 2 meth bungs and nozzles: Notice the upgraded T-Bolt Clamps (no leaks)!





Low level sensor + Compression fitting for Meth, It's never leaked!:



Compression fitting on lid to vent (no pressure build up):



Custom frame/mount reduces the footprint of tank, still includes the original coolingmist frame/mount: 2.3 Gallon Coolingmist tank





Reduced footprint allows easy clearance to open the rear cover:





PUMP:






Aquamist vs. Coolingmist

This kit has Aquamist parts with compression fittings. Other kits, like Coolingmist, come with quick connect fittings to the Solenoid and to the jets, are known to leak & these are under your hood.

I think the quality difference is obvious. The price difference is pretty big too, with this kit you'll be getting higher quality Aquamist parts, compression fittings that are safer to have under your hood. But this used kit will cost you less than a new Coolingmist kit.

This kit comes with these Aquamist compression fittings & fast acting valve/flow sensor.

Compression fittings to the Fast Acting Valve/Solenoid:


Meth Jet with compression fittings: $35 each


Compression Tee from FAV/Solenoid to the dual Meth Jets:


Aquamist FAV/Solenoid & Flow sensor uses compression fittings: $125 for FAV, $141 for flow sensor


Coolingmist uses quick connect fittings known to leak (not in this kit).

Solenoid: $60


Quick connect jets: $9 each

[spxxx]

Let me know if you'll split the FSB

[halcyon026]

Originally Posted by spxxx

Let me know if you'll split the FSB

At this point I wouldn't. I'd rather sell someone a complete kit if possible...

Thanks

[spxxx]

What is that big black thing next to the tank? I haven't seen that before lol

[halcyon026]

Originally Posted by spxxx

What is that big black thing next to the tank? I haven't seen that before lol

That's a bracket/mount to mount the pump under the hood, if desired. I mounted mine in the trunk near the tank.

[spxxx]

Originally Posted by halcyon026

That's a bracket/mount to mount the pump under the hood, if desired. I mounted mine in the trunk near the tank.

gotcha, yeah I have the 1.5g tank and was confused by that contraption

[GODDSPD]

Will you sell without the cp?

[halcyon026]

Originally Posted by SDWildcat

Will you sell without the cp?

Yup! PM'ed you.

[Devl]

How much shipped for the charge pipe?

[halcyon026]

Originally Posted by Devl

How much shipped for the charge pipe?

PM'ed you.

[halcyon026]

Bump