[Plamer]

Hello I have on 07 335i with 68k, New oem turbos 3000 miles ago, Just installed a friends JB4 G4 just to get a feel for the tune, I plan to switch over to MHD and use a wedge flash as soon as my CP, DP's and FMIC arrive on Thursday, Just wondering since i am new to the platform as well as tuning if anyone could take a moment and look at my log and tell me if anything jumps out at them. The only code i can pull either through the JB4 app or BWwhat is 29F3 Faulty low fuel pressure sensor.

FYI i did plugs, vacuum lines and a walnut blast at the same time as the turbos

Thanks in Advance for the help.

-S

EDIT TO ADD LINK WITH PROPER LOG: No longer JB4, Switched to MHD Stage 1

http://www.datazap.me/u/plamer/first...og=2&data=4-20

[mike@x-ph.com]

You need to post a proper log.
start your pull at third gear from 2500 rpm until 6000 rpm
Gas pedal needs to be 100% and traction control 100% off (press and hold the traction control button until you see the yellow triangle)

[Plamer]

Oops first time logging and i guess the log didn't capture the whole run, I just un-installed my JB4 and Uploaded a Flash thru MHD and will go log shortly.

Stoked to get my DP's, FMIC, and CP on Thursday.