|
|
|
|
 |
 |
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
19 row oil cooler setup - conversion
|
 |
| 06-23-2015, 07:14 PM | #1 |
|
Boost
1376
Rep 3,704
Posts
Drives: 135i M-Sport
Join Date: Feb 2014
Location: Valley of Silicon, CA - United States
|
19 row oil cooler setup - conversion
Never used, some knicks from shipping... purchased from a user on n54tech a while back - I realized that I only need a 9 row for my project. Asking $170 with all fittings needed to tap your stock oil cooler lines and add this core in place of the stock one. Cheapest oil cooler option out there.
__________________
F80 M3 TrackBoi, Z4MC GarageBoi, 1M Clone StreetBoi
Last edited by spxxx; 06-24-2015 at 12:15 PM.. |
| 07-01-2015, 11:28 PM | #2 |
|
Supreme Galactic Commander (one galaxy over...)
704
Rep 1,787
Posts |
Interested. Is this a Setrab cooler? I have no oil cooler currently but am getting the oil filter housing and already have the stock lines. I am trying to determine if the Setrab mounting bracket would work (since this would be a custom install, not a stock replacement. Thx.
__________________
Best,
Andy  '12 E82-PS2,Stoptechs,Clubsports+M3 bits,Accusump,Wagner DP+EVO III FMIC,ERCP,BMS Intake,Mason Strut Bar,Wedge Tune |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
