Inexpensive upgraded shock mounts

phubar · 06-30-2015, 10:34 PM

I was looking at purchasing the expensive polyurethane mounts from powerflex and similar vendors.

I found these by accident while at the local Napa store for $10 a piece. The Monroe 907984 appear to be a solid "rubber" material, unlike the soft OE foam most shock mounts are made of; and even tho they say they only fit non-sport suspension, they fit the m-sport suspension in my E93 just like the OEM mounts are have the same dimensions.

The difference is significant from my OEM mounts. There was a slight "bounciness" in the rear when going over rough roads or rail road tracks, now its completely firm.

Comparison pics below:

View post on imgur.com

07-01-2015, 09:34 AM

Great find!

Looks like a budget Dinan alternative lol regardless, way better than stock.

cpie168 · 07-01-2015, 09:53 AM

Nice glove lol

feuer · 07-01-2015, 10:26 AM

Quote:

Originally Posted by phubar

I found these by accident while at the local Napa store for $10 a piece. The Monroe 907984 appear to be a solid "rubber" material, unlike the soft OE foam most shock mounts are made of

Thank you Phubar! You info on the Koni's is also appreciated!

cgrizzly888 · 07-06-2015, 03:10 PM

I should of got a pair of these when I changed my rear shocks.

katsooba · 07-11-2015, 09:17 AM

do you happen to know if this fits the KW V3 rear shocks?
i dont know if the kw is 10 or 12mm
but i am almost certain my installer used the stock mounts when installed

HP Autosport · 07-11-2015, 09:34 PM

Quote:

Originally Posted by katsooba

do you happen to know if this fits the KW V3 rear shocks?
i dont know if the kw is 10 or 12mm
but i am almost certain my installer used the stock mounts when installed

The mounts don't matter, it's the sleeve that is either 10 or 12mm ID.

chris82 · 07-14-2015, 08:21 AM

Quote:

Originally Posted by phubar

I was looking at purchasing the expensive polyurethane mounts from powerflex and similar vendors.

I found these by accident while at the local Napa store for $10 a piece. The Monroe 907984 appear to be a solid "rubber" material, unlike the soft OE foam most shock mounts are made of; and even tho they say they only fit non-sport suspension, they fit the m-sport suspension in my E93 just like the OEM mounts are have the same dimensions.

The difference is significant from my OEM mounts. There was a slight "bounciness" in the rear when going over rough roads or rail road tracks, now its completely firm.

Comparison pics below:

View post on imgur.com

Jesus those stock mounts are soft!

nikitino25 · 07-15-2015, 03:35 AM

Quote:

Originally Posted by HP Autosport

The mounts don't matter, it's the sleeve that is either 10 or 12mm ID.

What sleeve Are you talking about?

HP Autosport · 07-15-2015, 11:45 AM

Quote:

Originally Posted by nikitino25

What sleeve Are you talking about?

The metal sleeve that goes on the inside of the shock mount.

ajsalida · 07-18-2015, 05:47 PM

Wish I'd seen these earlier. I recently installed a set of Powerflex yellow upper rear shock mounts.

Minor update/heads up here WRT to them and maybe these. As pointed out the stock mounts are pretty soft new, and degrade more with age. I replaced mine with the Pflex because I began to get some jiggling back there. The jiggling is gone but there were some odd knocking sounds on tiny bumps/pavement ripples while turning which were beginning to drive me crazy. Mainly right side rear.

The ONLY thing I did that day was the mounts and the intermittent knocking sound started almost immediately. I thought maybe I did not tighten the top shock nut down properly or lube the bushings enough, something. Took everything out from inside the trunk, took the nuts off, and the upper half of the mount. Everything had been tightened and lubed properly and zero sign anything was loose in there. Re-lubed/re-tightened/re-assembled everything.

When putting all the other stuff back in I noticed a slight rattle from the tool holder over the battery, and another rattle from the spare kit I run with since I dumped the run flats. Took out the loose things, voila, zero noise on a long test loop.

I can only conclude that since the new mounts were much stiffer, making the shocks work more (koni sports) and transmit more force to the car's unibody on tiny road imperfections, it was enough to start shaking those loose things enough extra to cause the noise.

So if you get some new noises maybe it is something along these lines. Or at least look into it before you tear your suspension apart. I had all kinds of things I was going to take apart but glad I stumbled across this first.

Seattlesquash · 07-18-2015, 11:09 PM

Quote:

Originally Posted by cpie168

Nice glove lol

Was just about to comment on the gloves too, damn you beat me! They do look nice and warm!

phubar · 07-18-2015, 11:22 PM

Quote:

Originally Posted by cpie168

Nice glove lol

Quote:

Originally Posted by Seattlesquash

Was just about to comment on the gloves too, damn you beat me! They do look nice and warm!

lol those are 7mm disposable gloves. I get the 100ct box. I dont use "mechanic" gloves because most of the time I end up taking them off when doing something that requires precision, I also like the convenience of being able to swap for a fresh pair if I get any chemicals on them, tho I also try to reuse them as much as possible.

fravel · 07-22-2015, 04:32 PM

Nice find. I think I'll try these before I spring for the Dinan kit.

B.J.C. · 07-29-2015, 12:12 AM

These look good (though I have dinan bits sitting in my garage waiting to be installed). Does Monroe make good lower shock mounts too?

phubar · 07-29-2015, 01:05 AM

I honestly don't know. I used OEM for the lower mounts. I didn't even consider Monroe for the upper mounts until I found these at store by pure luck.

Meeni · 07-29-2015, 03:37 AM

Quote:

Originally Posted by phubar

lol those are 7mm disposable gloves. I get the 100ct box. I dont use "mechanic" gloves because most of the time I end up taking them off when doing something that requires precision, I also like the convenience of being able to swap for a fresh pair if I get any chemicals on them, tho I also try to reuse them as much as possible.

I'm with you. Nitrile gloves, the 100 box cost $5 at harbor freight, they are just awesome for mechanic. They are strong enough that they usually last 2 or 3 work sessions with multiple removals.

ThatRWD · 08-01-2015, 11:40 PM

Why does everyone except me have a pair of serial killer gloves?

avocet · 08-05-2015, 02:13 PM

Quote:

Originally Posted by phubar

The difference is significant from my OEM mounts. There was a slight "bounciness" in the rear when going over rough roads or rail road tracks, now its completely firm.

I just did these. It is shocking(I know, I know) how much difference they actually make!

Cheap, and easy. Did not even have to undo the lower mounts to change them out.

When I did my subframe bushings and shocks I used oem mounts. In hindsight that was a mistake!

Thanks!!!

jin · 08-05-2015, 08:13 PM

OP thanks for taking the time to post this. I swapped out my rear shocks yesterday and bought these mounts on your recommendation. Perfect fitment and noticably harder than OEM mounts.

cdgatti · 08-07-2015, 05:29 PM

jin hows ths performance?

jin · 08-07-2015, 06:50 PM

Quote:

Originally Posted by cdgatti

jin hows ths performance?

My rear shocks were completely blown so i replaced with new shocks along with these mounts. So I cant really say what a difference the mounts alone have made. They are a LOT stiffer than the OEM mounts so will firm things up a lot.

In fact the shocks i put in were the BMWPS v.1 which included new mounts that are supposed to be firmer than the m-sport mounts. They might have been but i couldnt tell from squeezing them.

avocet said he installed these and they made a big difference. I can believe that given the difference between these mounts and OEM.

06-30-2015, 10:34 PM	#1
phubar Lieutenant 91 Rep 465 Posts Drives: 335 Vert Join Date: Apr 2013 Location: Fort Campbell KY iTrader: (8)	Inexpensive upgraded shock mounts - Monroe 907984 I was looking at purchasing the expensive polyurethane mounts from powerflex and similar vendors. I found these by accident while at the local Napa store for $10 a piece. The Monroe 907984 appear to be a solid "rubber" material, unlike the soft OE foam most shock mounts are made of; and even tho they say they only fit non-sport suspension, they fit the m-sport suspension in my E93 just like the OEM mounts are have the same dimensions. The difference is significant from my OEM mounts. There was a slight "bounciness" in the rear when going over rough roads or rail road tracks, now its completely firm. Comparison pics below: View post on imgur.com View post on imgur.com View post on imgur.com View post on imgur.com View post on imgur.com View post on imgur.com View post on imgur.com View post on imgur.com
	Appreciate 11 AWDBooSTIn90154.50 Built4Sin100.00 =C=73.00 lab_rat396.50 SCS55301.00 Will_460cs220.00 Ughandi1.50 Tweet Quote

07-01-2015, 09:34 AM	#2
FCobra94 Guest 0 Rep n/a Posts Drives:	Great find! Looks like a budget Dinan alternative lol regardless, way better than stock.
	Appreciate 0 Quote

07-01-2015, 09:53 AM	#3
cpie168 Major 173 Rep 1,117 Posts Drives: 2010 E90 328i 6MT ZSP BSM Join Date: Mar 2014 Location: K/W and GTA, Ontario, Canada iTrader: (1)	Nice glove lol
	Appreciate 2 Quote

07-06-2015, 03:10 PM	#5
cgrizzly888 Private First Class 15 Rep 104 Posts Drives: 2011 335i xdrive Join Date: Feb 2014 Location: NJ iTrader: (0)	I should of got a pair of these when I changed my rear shocks.
	Appreciate 0 Quote

07-11-2015, 09:17 AM	#6
katsooba First Lieutenant 86 Rep 358 Posts Drives: bmw 135i Join Date: Apr 2012 Location: Israel iTrader: (0)	do you happen to know if this fits the KW V3 rear shocks? i dont know if the kw is 10 or 12mm but i am almost certain my installer used the stock mounts when installed __________________ 135i N55 / KW V3 / MHD Flash / Tons of grip mods / CP-E charge pipe / CP-E 7" FMIC
	Appreciate 0 Quote

07-18-2015, 05:47 PM	#11
ajsalida Colonel 229 Rep 2,387 Posts Drives: 95 M3, 02 R1150GSA, 09 335xi Join Date: Aug 2010 Location: SW USA iTrader: (2)	Wish I'd seen these earlier. I recently installed a set of Powerflex yellow upper rear shock mounts. Minor update/heads up here WRT to them and maybe these. As pointed out the stock mounts are pretty soft new, and degrade more with age. I replaced mine with the Pflex because I began to get some jiggling back there. The jiggling is gone but there were some odd knocking sounds on tiny bumps/pavement ripples while turning which were beginning to drive me crazy. Mainly right side rear. The ONLY thing I did that day was the mounts and the intermittent knocking sound started almost immediately. I thought maybe I did not tighten the top shock nut down properly or lube the bushings enough, something. Took everything out from inside the trunk, took the nuts off, and the upper half of the mount. Everything had been tightened and lubed properly and zero sign anything was loose in there. Re-lubed/re-tightened/re-assembled everything. When putting all the other stuff back in I noticed a slight rattle from the tool holder over the battery, and another rattle from the spare kit I run with since I dumped the run flats. Took out the loose things, voila, zero noise on a long test loop. I can only conclude that since the new mounts were much stiffer, making the shocks work more (koni sports) and transmit more force to the car's unibody on tiny road imperfections, it was enough to start shaking those loose things enough extra to cause the noise. So if you get some new noises maybe it is something along these lines. Or at least look into it before you tear your suspension apart. I had all kinds of things I was going to take apart but glad I stumbled across this first.
	Appreciate 3 Ughandi1.50 JJT2110.00 Quote

07-22-2015, 04:32 PM	#14
fravel Colonel 1648 Rep 2,494 Posts Drives: Monaco Blue '06 330i Join Date: Aug 2012 Location: The Nasti 'Nati iTrader: (1)	Nice find. I think I'll try these before I spring for the Dinan kit. __________________
	Appreciate 0 Quote

07-29-2015, 12:12 AM	#15
B.J.C. Private 0 Rep 50 Posts Drives: e90 335i (2007) Join Date: Aug 2014 Location: Ottawa, ON iTrader: (1)	These look good (though I have dinan bits sitting in my garage waiting to be installed). Does Monroe make good lower shock mounts too?
	Appreciate 0 Quote

07-29-2015, 01:05 AM	#16
phubar Lieutenant 91 Rep 465 Posts Drives: 335 Vert Join Date: Apr 2013 Location: Fort Campbell KY iTrader: (8)	I honestly don't know. I used OEM for the lower mounts. I didn't even consider Monroe for the upper mounts until I found these at store by pure luck.
	Appreciate 0 Quote

08-01-2015, 11:40 PM	#18
ThatRWD Major 116 Rep 1,063 Posts Drives: 335i Join Date: Mar 2014 Location: Northern VA iTrader: (0)	Why does everyone except me have a pair of serial killer gloves? __________________ Sideways is the way of life.
	Appreciate 5 Seattlesquash977.50 AWD Addict388.00 Quote

08-05-2015, 08:13 PM	#20
jin Second Lieutenant 74 Rep 252 Posts Drives: 2007 E90 335i Join Date: Jan 2015 Location: NZ iTrader: (2)	OP thanks for taking the time to post this. I swapped out my rear shocks yesterday and bought these mounts on your recommendation. Perfect fitment and noticably harder than OEM mounts.
	Appreciate 2 Quote

08-07-2015, 05:29 PM	#21
cdgatti Colonel 260 Rep 2,547 Posts Drives: e90 328i Join Date: May 2011 Location: KY iTrader: (4)	jin hows ths performance? __________________ OEM Black grill and Blackline tails - LCI halogens with Lux V2 coded as DRL - 3M Crystalline - BMS PBX - OEM Euro Airbox with K&N - Hardwired CTEK - Bilstein B6 w/OEM springs and SP perches - Conti DWS06 - HiFi-Helix DSP - JLAudio HD/XD-Morel - CD changer trim - AE optical out
	Appreciate 0 Quote