[Odan.be]

I yesterday flashed back to the "stock" OEM like map , to do some baseline logging.
And i noticed something strange.
I found some "old" posts on the internet concerning this issue. but it was not conclusive to me

when switching gears on a MT , mostly from 3th to 4th gear. the DME pulls negative timing on various cyl.
As far as i can find in the logs there is no real explanation why.
The older posts state that is has something to do with the load request, or the DTC / DSC traction control setting. but i hadn't time yet to figure that out or log it

Anybody some knowledge on this ?

Here is the log : ( 2 log files )
http://datazap.me/u/odanbe/mhd-stage...3.00&tmax=0.00

[Dmacc]

What are your mods?

[Odan.be]

downpipes , charge pipe with tial bov and DCI cones.. not other mods

[Dmacc]

Originally Posted by Odan.be

downpipes , charge pipe with tial bov and DCI cones.. not other mods

I replied to you in the other thread, but running the stock tune catless will result in timing drops like that. The map needs to be adjusted for the added flow in the system.