[Demon335i]

Hey guys,


I have a 07 335i E92 with a Remus exhaust system. I bought it from a dealer as is and it would crackle and burble like crazy (upon deceleration) , it was just awesome!

I got a JB4 installed about 2 weeks ago and ever since, the crackle/burble is pretty much gone, you can still hear it but you have to have the windows down and listen real hard - it's almost like it's been muffled.

I contacted Burger motorsports about this and they said they it may have something to do with disconnecting the battery?

anyone know what's going on?


PS: running on Map 0.

[tc535i]

map 0 bypasses jb4, so it isn't having any affect on your car at that point

no idea what happened, it certainly wasn't anything with the tuning

[Demon335i]

Originally Posted by tc535i

map 0 bypasses jb4, so it isn't having any affect on your car at that point

no idea what happened, it certainly wasn't anything with the tuning

Yeah just stated that I was on map 0 for diagnostic purposes

[DennyD06]

On menu 10 in dash with JB4 set it to 0 to get the burble /crackle back . It will open up your Default waste gate position up .

[idrift4wd]

jb4 sets your wastegate position a little higher to help with wastegate rattle. you can lower it or set future D to 98. It will sound all poppy at low speeds and fix boost lag at higher speeds.

[tc535i]

Originally Posted by idrift4wd

jb4 sets your wastegate position a little higher to help with wastegate rattle. you can lower it or set future D to 98. It will sound all poppy at low speeds and fix boost lag at higher speeds.

I've really been noticing this lately, sounds great!

[Demon335i]

Originally Posted by DennyD06

On menu 10 in dash with JB4 set it to 0 to get the burble /crackle back . It will open up your Default waste gate position up .

Originally Posted by idrift4wd

jb4 sets your wastegate position a little higher to help with wastegate rattle. you can lower it or set future D to 98. It will sound all poppy at low speeds and fix boost lag at higher speeds.

THANKYOU

it worked!

Menu 10 = 3, so I set it at 0. Now I'm back to burbling for days!

so happy haha, I owe you guys a beer or two

PS: not sure why BMS did not tell me this to start with :S

[theDELO]

Good to know, I don't think I could live without the pop an gargle from my current exhaust setup

[335NJ]

Menu 10 & RPM 0 sounds like turbo lag city.

Enable Future Use D value set at 98. Put menu 10 back to 3000ish.

[tc535i]

Originally Posted by 335NJ

Menu 10 & RPM 0 sounds like turbo lag city.

Enable Future Use D value set at 98. Put menu 10 back to 3000ish.

Im liking fud 98. Responsive when I push it and great off throttle burble which means wastegates are snapping shut