New York Members!! Can I Pass Ny Emissions With Jb4?

Your average e90 · 08-20-2015, 04:45 PM

hey guys,
this is for my new York members
car e90 2008 335xi STOCK!!
I am planning to do the jb4 as my first mod, but as I researched the jb4 constantly erases codes which is good for catless down pipes
however I am not going that route as yet but I want to install the jb4 and I would like to know will my car pass nys inspections with a jb4 plugged in or I would have to remove it everytime, or can I put it in such a mode where its "off" ?

Duperstar · 08-20-2015, 06:37 PM

Yes you will pass just make sure it's in map 0 when it's taken in for inspection so it doesn't block the obd2 port. If you install a backend flash, that will muddy things. Just jb4 and you are fine.

Your average e90 · 08-21-2015, 12:44 AM

Cool thanks one more thing after setting map to 0 should i drive the car around to ready all monitors or there is no need fo that?

nyt · 08-21-2015, 01:02 AM

Last time I ran an NY inspection on my N54 with JB4, forgot to change it to map 0 and it was still fine. It couldn't read the readiness status, as I had 3 not ready and still passed.

08-20-2015, 04:45 PM	#1
Your average e90 New Member 1 Rep 10 Posts Drives: MONTEGO BLUE '08 335XI Join Date: Jun 2015 Location: New York iTrader: (0)	New York Members!! Can I Pass Ny Emissions With Jb4? hey guys, this is for my new York members car e90 2008 335xi STOCK!! I am planning to do the jb4 as my first mod, but as I researched the jb4 constantly erases codes which is good for catless down pipes however I am not going that route as yet but I want to install the jb4 and I would like to know will my car pass nys inspections with a jb4 plugged in or I would have to remove it everytime, or can I put it in such a mode where its "off" ?
	Appreciate 0 Tweet Quote

08-20-2015, 06:37 PM	#2
Duperstar Private First Class 27 Rep 115 Posts Drives: G30 540 Join Date: Aug 2012 Location: NYC iTrader: (1)	Yes you will pass just make sure it's in map 0 when it's taken in for inspection so it doesn't block the obd2 port. If you install a backend flash, that will muddy things. Just jb4 and you are fine.
	Appreciate 0 Quote

08-21-2015, 12:44 AM	#3
Your average e90 New Member 1 Rep 10 Posts Drives: MONTEGO BLUE '08 335XI Join Date: Jun 2015 Location: New York iTrader: (0)	Cool thanks one more thing after setting map to 0 should i drive the car around to ready all monitors or there is no need fo that?
	Appreciate 0 Quote

08-21-2015, 01:02 AM	#4
nyt Second Lieutenant 128 Rep 256 Posts Drives: 2010 335xi Join Date: Aug 2014 Location: Long Island, NY iTrader: (0)	Last time I ran an NY inspection on my N54 with JB4, forgot to change it to map 0 and it was still fine. It couldn't read the readiness status, as I had 3 not ready and still passed.
	Appreciate 0 Quote