yes or no spacers

deepocean · 08-25-2015, 11:38 AM

guys am looking for straight forward answer

http://www.turnermotorsport.com
spacers 12.5 mm front 15mm rear with m sport suspension and 19" as i read somewhere 10mm will case vibration
do you recommend ?
do i need alignment?

regards

N0Chill 335i · 08-25-2015, 11:59 AM

Get hubcentric machined finished spacers. Clean your hubs with PB Blaster and a wire brush. Tighten in the star pattern to factory settings. You won't have any issues unless you buy cheap spacers, already have an unbalanced or bent wheel. You don't need an alignment, it won't hurt to get one, but it's not required.

deepocean · 08-26-2015, 05:52 AM

so here i have one yes

FoShizzle · 08-27-2015, 09:02 PM

Same as above. Buy a good brand name spacer (and extended bolts), clean your hubs, torque correctly and you'll be totally fine. Been through many sets of spacers on many cars. Only had an issue once with some cheap Chinese spacers and bolts.

08-25-2015, 11:38 AM	#1
deepocean Second Lieutenant 43 Rep 164 Posts Drives: E92 335 Join Date: Oct 2012 Location: UAE iTrader: (0)	yes or no spacers guys am looking for straight forward answer http://www.turnermotorsport.com spacers 12.5 mm front 15mm rear with m sport suspension and 19" as i read somewhere 10mm will case vibration do you recommend ? do i need alignment? regards __________________ • BMS Dual intake system • RB PCV Valve • BMS Oil Catch Can • BMS Oil Thermostat • COBB FMIC • COBB AccessPort V3 • Aerodynamic kit‬‏ • M Package • Cp-e BOV •Cp-e 3" catless DP • Wedge performance stg2 map
	Appreciate 0 Tweet Quote

08-25-2015, 11:59 AM	#2
N0Chill 335i Colonel 855 Rep 2,771 Posts Drives: 13' F30 335i M Sport AW Join Date: Nov 2011 Location: MD iTrader: (2)	Get hubcentric machined finished spacers. Clean your hubs with PB Blaster and a wire brush. Tighten in the star pattern to factory settings. You won't have any issues unless you buy cheap spacers, already have an unbalanced or bent wheel. You don't need an alignment, it won't hurt to get one, but it's not required.
	Appreciate 0 Quote

08-26-2015, 05:52 AM	#3
deepocean Second Lieutenant 43 Rep 164 Posts Drives: E92 335 Join Date: Oct 2012 Location: UAE iTrader: (0)	yes so here i have one yes __________________ • BMS Dual intake system • RB PCV Valve • BMS Oil Catch Can • BMS Oil Thermostat • COBB FMIC • COBB AccessPort V3 • Aerodynamic kit‬‏ • M Package • Cp-e BOV •Cp-e 3" catless DP • Wedge performance stg2 map
	Appreciate 0 Quote

08-27-2015, 09:02 PM	#4
FoShizzle aka Mike 108 Rep 1,395 Posts Drives: AW E92 335is Join Date: Jun 2008 Location: LA/Ventura, CA iTrader: (11)	Same as above. Buy a good brand name spacer (and extended bolts), clean your hubs, torque correctly and you'll be totally fine. Been through many sets of spacers on many cars. Only had an issue once with some cheap Chinese spacers and bolts.
	Appreciate 0 Quote