Sponsored by The Tire Rack

[J90]

Hi there,

Am interested in buying some pre-owned wheels for my E93 on stock suspension with drop perches in the front. The wheels in question are:

19x9.5 et33 front and the rears are 19x9.5 et22

Will these fit my car without camber trickery or fender rolling/mods?

I have looked at offset calculator tools and from what I am seeing, it seems like these will not fit. I won't be running overly small tires - 265 rears, 235s front.

I'm basically tryign to emulate the car below's looks and he claims to run basically the same size PLUS more spacers, but I don't know how that is possible:

http://www.e90post.com/forums/showthread.php?t=806373

Can anyone help me sort this out? Thanks!

[ZhengHai]

Yes they will fit. You will need some bigger spacers for sure. I can't remember how much room the rears have on e93 compared to e90s but you can fit 9.5 +20 up front with 235/35. I have that up front now. And I'm slammed. So at least a 10mm spacer. Just depends on how close you want to really get. But even a 12mm up front would work. In the rears I would get 12 mm spacers. If you run the same spec as the pic you posted you will be fine as well.

[MonacoBlueE90]

Originally Posted by ZhengHai

Yes they will fit. You will need some bigger spacers for sure. I can't remember how much room the rears have on e93 compared to e90s but you can fit 9.5 +20 up front with 235/35. I have that up front now. And I'm slammed. So at least a 10mm spacer. Just depends on how close you want to really get. But even a 12mm up front would work. In the rears I would get 12 mm spacers. If you run the same spec as the pic you posted you will be fine as well.

I wouldn't use any spacers, since he doesn't want fender work/camber and wont be slammed. Also wants to use 265/30/19 rear tyre which means that there wont be room for spacers with 9.5 et22. E93 have slightly less room than E90.

Originally Posted by peakay

The wheels in question are:

19x9.5 et33 front and the rears are 19x9.5 et22

Will these fit my car without camber trickery or fender rolling/mods?


I'm basically tryign to emulate the car below's looks and he claims to run basically the same size PLUS more spacers, but I don't know how that is possible:

http://www.e90post.com/forums/showthread.php?t=806373

I'm going to say that the car in that link has spacers, but the final offset are with the spacers. The 19x9.5 et33 with 235/35/19 will fit to front without issues and will clear inside, but i'm not sure about the rear 19x9.5 et22 with 265/30/19 most likely needs little bit fender rolling. With 235/35/19 rear it would probably fit without fender work.

Here is the same car as in your link but different wheels
http://www.e90post.com/forums/showthread.php?t=599539

This one is 19x9.5 et32 235/35/19 front and 19x10 et27 rear with 265/30/19, which by the way extends 1mm more than 9.5 et22. No fender work but rubs at bigger bumps. So i would assume you would have some rubbing even though you aren't lowered at rear.

http://www.e90post.com/forums/showthread.php?t=1069084

[ZhengHai]

Word! Monaco with the save

[UPWheels]

We have a similar set, UP520, with those exact specs and offset. Great deals for forum members. Feel free to PM us for more details.