[Asps91]

Hey guys, after a 335i e92 stock bucket (pump can be shagged... Doesn't really matter). I'm going to do a custom walbro 450 in tank but want to keep my stock bucket and pump just incase. Also after a stock e92 335i exhuast. I'm doing a Pe mod but have an issue with my exhuast valve rattling so would prefer to use another one. thanks guys

[CYL]

What about PE mod + golf tee mod all together?

[iliketurtl3s]

I have a stock exhaust if u want. Pm me.

[DR-JEKL]

I doubt anyone would have a stock bucket laying around, best bet would to try the UK wreckers...

I have a stock bucket, as I was one of the 1st to get the fuelit stage 2 lpfp and have steve knock one up without the core exchange but like yourself im keeping it as a backup just in case (stage 3 one day maybe!)

[Asps91]

Originally Posted by CYL

What about PE mod + golf tee mod all together?

The flapper valve is so fkd that it rattles even with the golf tee mod lol. Apparent they can fail and the tip and valve need to be replaced. We're quite a few done under warranty.

[Asps91]

Originally Posted by DR-JEKL

I doubt anyone would have a stock bucket laying around, best bet would to try the UK wreckers...

I have a stock bucket, as I was one of the 1st to get the fuelit stage 2 lpfp and have steve knock one up without the core exchange but like yourself im keeping it as a backup just in case (stage 3 one day maybe!)

Yep, might have to do that I guess.

[Asps91]

Originally Posted by iliketurtl3s

I have a stock exhaust if u want. Pm me.

Probally not worth freighting from Melbourne. Should have mentioned looking in Sydney for the exhuast. Thanks anyways brother

[CYL]

Originally Posted by Asps91

The flapper valve is so fkd that it rattles even with the golf tee mod lol. Apparent they can fail and the tip and valve need to be replaced. We're quite a few done under warranty.

still rattles even with golf tee mod?
I thought the golf tee mod will keep the flapper staying open.
I am wondering what makes the flapper so fkd
is it possible to take the flapper out if golf tee mod is keeping it open anyway?

[Asps91]

Originally Posted by CYL

still rattles even with golf tee mod?
I thought the golf tee mod will keep the flapper staying open.
I am wondering what makes the flapper so fkd
is it possible to take the flapper out if golf tee mod is keeping it open anyway?

There is either play in the actuator or the flapper itself. Havent actually worked it out yet but know its coming from the valve assembly somewhere. I was going to apply a few tack welds to the flapper but never got around to it as was initially going to do straight pipes. It doesn't look possible to remove the flapper, however I could just weld in some straight pipe between the muffler and the exhaust tip and completely remove it.