|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Misfire help
|
|
12-07-2015, 11:46 PM | #1 |
New Member
2
Rep 9
Posts |
Misfire help
Ok so I need some help I had a misfire which was injectors when I first bought my 08 335xi so I replaced all 6 with the newest ones. Misfire was fixed then couple months later I installed jb4 and right away had a Mis under load. Since then I have replaced vcg, plugs, coils, carbon blast. Pretty much everything that causes a Mis and still can't fix it. It's only missing under wot under 4K in 1st and 2nd and wot in any other gear. I use to be able to pull 3rd above 4K with no prob,but just recently I can't with out missing l. Any suggestions would be appreciated.
|
12-08-2015, 12:54 AM | #2 | |
MR. Rocket
47
Rep 398
Posts
Drives: 2010 E92 335i M-Sport
Join Date: May 2013
Location: Portland, OR
|
Quote:
__________________
|2010 E92 335i 6MT\\\M-Sport///225M 19" Rims, MHD PTF Stg 2+, Fuel IT Stage 2 LPFP, VRSF Downpipes, CDV Delete, ER CP & 5" IC, Forge DV, PE Modded Mufflers, BMS DCI & Cowl Delete, CYBA Tips, ST Coils, M3 Control Arms, E93 M3 Sway Bar, Michelin PSS|
|
|
Appreciate
0
|
12-08-2015, 05:38 AM | #4 |
New Member
2
Rep 9
Posts |
https://drive.google.com/folderview?...lU&usp=sharing
Here are 3 logs i did last night, note that i let off the throttle as soon as it misfired so last two logs are short. Also if you prefer the graph version instead just let me know. |
Appreciate
0
|
02-13-2016, 08:47 PM | #8 |
New Member
2
Rep 9
Posts |
It was the hold down strap for the 5+6th injector. It was stripped there for the injectors were bouncing around not sealing. Unfortunately the dealer re tapped it but the head was bored out by them bouncing around so it needs a new head to fully repair.
|
Appreciate
0
|
Bookmarks |
|
|