[Nonecure]

I just installed DP’s and Inlets and will need to work with Wedge on getting my tune dialed in. I had plenty of roads that smooth and low traffic. I will be temporarily living in Milwaukee and I don’t see anywhere that I can do a 3rd gear pull. The roads that I have driven on seem very crowded and very bumpy. I’m in the vicinity of Miller Park.

Can someone from the Milwaukee area tell me where I can do a 3rd gear pull?

[patsbimmer1]

Hwy 43 between new berlin and big bend at night.

[Antetokounmpo]

Doing 3rd gear pulls on the onramps from pewaukee westward is a pretty good place too

[Antetokounmpo]

Allegedly this on ramp works well

[Nonecure]

I will check out Hwy 43 since it is closer to where I live. This on ramp might be worth checking out too. At my old location I have been using an on ramp since I like to have a full rpm range to look at. Google earth showed this on ramp being almost flat (for an on ramp). It would not work for virtual dyno, but good enough for tuning.

[Antetokounmpo]

Originally Posted by Nonecure

I will check out Hwy 43 since it is closer to where I live. This on ramp might be worth checking out too. At my old location I have been using an on ramp since I like to have a full rpm range to look at. Google earth showed this on ramp being almost flat (for an on ramp). It would not work for virtual dyno, but good enough for tuning.

The onramp to 94 west on 11th street is decent too. It has a 90deg turn but if you take the turn in third then punch it as soon as it straightens out it works well. It's only a few miles from the miller park area too.

[patsbimmer1]

Speaker of Miller Park, the on-ramp and proceeding highway section from Frederick Miller Way to Miller Park Way going north. And not that I know but Selig Drive by the stadium is usually good for pulls from a dig. Only problem with any of them is how close they are to a highly populated area.

[e92_boost]

Come by my dads yard perfect straight away by college ave