Best price for OEM DMFW/335is clutch

whyzee125 · 12-27-2015, 02:38 AM

Just thought I'd let everyone know where the best place to buy these items is (that I've found). I bought an OEM Luk DMFW for $504 shipped from eEuroparts and a 335is clutch kit from Husker BMW for $340 shipped.
Part #s 21207542984 and 21207603248 respectively.

danas · 12-27-2015, 10:16 AM

Good prices.

One thing needs to be mentioned. Flywheel you mentioned is for cars up to Feb 2009 and has 8 flywheel to crankshaft bolts.

2009 feb and newer has 6 bolts , part # BMW Flywheel 21207590942 - Luk DMF134

http://www.eeuroparts.com/Parts/7548...l-Mass-DMF134/

I recommend using http://www.realoem.com/bmw/enUS/select with you cars VIN to check which part # for Flywheel. Especially if your car build is early 2009

danas · 12-27-2015, 11:11 AM

If you bought OEM 335is/550i/650i Clutch kit 21207603248 it comes with :
Clutch friction disc
Throwout/release bearing
Clutch fork lever
Pressure plate
Pressure plate bolts

Other things you will/might need for Clutch/Flywheel/Rear crankshaft seal replacement :

Clutch alignment tool 83300495449

Rear Crankshaft Seal 11117587168

Clutch Pilot bearing 21207536792

Clutch Fork Pivot Pin 21511223328

Bell Housing Bolt Set Torx Bolt (M12x90) 23000417164 (set of 5pc. Discontinued, but few places still have them) Replaced by 23001222894 have to get 5pc's

6pc (From 09 Jan ) or 8pc ( up to 09 January) Flywheel Bolt (M12x1.5x25) 11227520706

danas · 12-27-2015, 11:13 AM

This Info was posted by jyamona in another thread :

I found two separate sets of info:

FW to Crankshaft - 92ftlb with red loctite.
PP to FW - 22 ftlb with red loctite.
Alum bolts for Bellhousing - 15ftlb then 180 degrees more.
Steel bolts for 2 upper Bellhousing - 15ftlb then 90 degrees more.
Smaller Torx around lower bellhousing - 36 ftlb

---------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------

FW to Crankshaft - 89ftlb
PP to FW - 11ftlb +90*
Bell Housing M10x85 - 15ftlb +90*
M10x30 - 15ftlb +180*
M12: - 18ftlb +130*
M8 - 53ftlb
Differential Flex Disc M10x10.9 - 15ftlb +90*
M12x10.9 - 41ftlb +90*
Driveshaft center bearing sup. to body - 15ftlb
Lug Nuts - 89ftlb

nitehawk · 12-27-2015, 01:32 PM

Quote:

Originally Posted by whyzee125

Just thought I'd let everyone know where the best place to buy these items is (that I've found). I bought an OEM Luk DMFW for $504 shipped from eEuroparts and a 335is clutch kit from Husker BMW for $340 shipped.
Part #s 21207542984 and 21207603248 respectively.

$504 shipped? Its listed at $525...

unrealii · 02-09-2016, 02:09 PM

This was useful. I just ordered a plethora of parts from Husker bmw.

12-27-2015, 02:38 AM	#1
whyzee125 Brigadier General 2007 Rep 4,031 Posts Drives: Dinan stage 2 335i Join Date: Jul 2014 Location: Chattanooga Tn iTrader: (0)	Best price for OEM DMFW/335is clutch Just thought I'd let everyone know where the best place to buy these items is (that I've found). I bought an OEM Luk DMFW for $504 shipped from eEuroparts and a 335is clutch kit from Husker BMW for $340 shipped. Part #s 21207542984 and 21207603248 respectively.
	Appreciate 1 Tweet Quote

12-27-2015, 10:16 AM	#2
danas Private First Class 16 Rep 137 Posts Drives: E92 335i M N54 Join Date: Jun 2012 Location: CT iTrader: (0)	Good prices. One thing needs to be mentioned. Flywheel you mentioned is for cars up to Feb 2009 and has 8 flywheel to crankshaft bolts. 2009 feb and newer has 6 bolts , part # BMW Flywheel 21207590942 - Luk DMF134 http://www.eeuroparts.com/Parts/7548...l-Mass-DMF134/ I recommend using http://www.realoem.com/bmw/enUS/select with you cars VIN to check which part # for Flywheel. Especially if your car build is early 2009 Last edited by danas; 12-27-2015 at 11:17 AM..
	Appreciate 0 Quote

12-27-2015, 11:11 AM	#3
danas Private First Class 16 Rep 137 Posts Drives: E92 335i M N54 Join Date: Jun 2012 Location: CT iTrader: (0)	If you bought OEM 335is/550i/650i Clutch kit 21207603248 it comes with : Clutch friction disc Throwout/release bearing Clutch fork lever Pressure plate Pressure plate bolts Other things you will/might need for Clutch/Flywheel/Rear crankshaft seal replacement : Clutch alignment tool 83300495449 Rear Crankshaft Seal 11117587168 Clutch Pilot bearing 21207536792 Clutch Fork Pivot Pin 21511223328 Bell Housing Bolt Set Torx Bolt (M12x90) 23000417164 (set of 5pc. Discontinued, but few places still have them) Replaced by 23001222894 have to get 5pc's 6pc (From 09 Jan ) or 8pc ( up to 09 January) Flywheel Bolt (M12x1.5x25) 11227520706
	Appreciate 0 Quote

12-27-2015, 11:13 AM	#4
danas Private First Class 16 Rep 137 Posts Drives: E92 335i M N54 Join Date: Jun 2012 Location: CT iTrader: (0)	This Info was posted by jyamona in another thread : I found two separate sets of info: FW to Crankshaft - 92ftlb with red loctite. PP to FW - 22 ftlb with red loctite. Alum bolts for Bellhousing - 15ftlb then 180 degrees more. Steel bolts for 2 upper Bellhousing - 15ftlb then 90 degrees more. Smaller Torx around lower bellhousing - 36 ftlb --------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------- FW to Crankshaft - 89ftlb PP to FW - 11ftlb +90* Bell Housing M10x85 - 15ftlb +90* M10x30 - 15ftlb +180* M12: - 18ftlb +130* M8 - 53ftlb Differential Flex Disc M10x10.9 - 15ftlb +90* M12x10.9 - 41ftlb +90* Driveshaft center bearing sup. to body - 15ftlb Lug Nuts - 89ftlb
	Appreciate 0 Quote

02-09-2016, 02:09 PM	#6
unrealii Captain 77 Rep 630 Posts Drives: '09 335 E93 6MT Join Date: Mar 2011 Location: Socal iTrader: (3) Garage List 2002 Toyota 4Runner [0.00] 2009 BMW 335I [10.00]	This was useful. I just ordered a plethora of parts from Husker bmw.
	Appreciate 0 Quote