Idea -VM preloaded

rapco · 01-06-2016, 08:38 PM

Hey!

I used to have a working INPA on Windows 7 x64, with a very inexpensive cable from Amazon.

My only laptop now runs Windows 10 x64, I can't get it to work.

Do you think will be useful is I built a VM with the basics pre-configured in Virtual Box and share it to the forum members? Anyone have one already cause I can't find it in the search box?

Legal matters I can think is you should have your own Windows XP licence as I would be using a generic one.

Banana Clipper · 01-06-2016, 08:47 PM

Oh god yes, if you like I can host a mirror in my Google Drive. I'm struggling to get the right combination of different software to get the damn thing to work properly.

At the very least I'd be interested in the software if you can. I'll PM you

wildcatcrazy · 01-06-2016, 10:48 PM

Give this set up a try.
DIY: Setup BMW Standard Tools 2.12 on Windows XP > 10 http://www.e90post.com/forums/showthread.php?t=1204192

rapco · 01-07-2016, 07:55 PM

Thanks will try that and post back.

rapco · 01-08-2016, 08:44 AM

I think I'm in the right track. So far I was able to get it to read the car status (Both Black Dots). I will be adding the DATEN files today or tomorrow, and run further tests.

deeLow · 01-10-2016, 01:52 PM

I could definitely use this. My windows box has recently shit the bed, so all I have is my mac. A VM I could run on it would be awesome.

rapco · 01-13-2016, 09:39 AM

I got one I believe is working. However my two E90 are EURO specs and I installed a US INPA. Some modules communicates others does not and all units are imperial.

I would like to share it thru a Private Torrent so we don´t have to deal with ads and clicks in shitty websites. Are you guys OK with that?

deeLow · 01-13-2016, 11:04 AM

Quote:

Originally Posted by rapco

I got one I believe is working. However my two E90 are EURO specs and I installed a US INPA. Some modules communicates others does not and all units are imperial.

I would like to share it thru a Private Torrent so we have to deal with ads and clicks in shitty websites. Are you guys OK with that?

PM me the link, I'll test it out for you when I get a chance.

nate16 · 01-13-2016, 12:12 PM

http://mhhauto.com/Thread-PORTABLE-N...ed-system-V3-0

rapco · 01-13-2016, 08:32 PM

Seems like I need to donate to join that forum. Do you have it?

deeLow · 01-24-2016, 08:03 PM

Bump

Welp, I tried connecting and get no dots. Maybe I have to go through some settings related to the cable.

Joe@TopGearSolutions · 01-24-2016, 08:41 PM

Quote:

Originally Posted by deeLow

Bump

Welp, I tried connecting and get no dots. Maybe I have to go through some settings related to the cable.

Make sure you "connect" the KDCAN cable inside the VM.

deeLow · 01-25-2016, 07:25 AM

Quote:

Originally Posted by Joe@TopGearSolutions

Quote:

Originally Posted by deeLow

Bump

Welp, I tried connecting and get no dots. Maybe I have to go through some settings related to the cable.

Make sure you "connect" the KDCAN cable inside the VM.

Yea I think I did that part right but didn't set it up on device manager properly. When the pop up asked where to connect Mac VS Windows I hit Windows, saw it trying to set something up and then gave me the driver may not have installed correctly yadadada. Then no connection.

I'm gonna try again later on when I get a chance. But no problems running the VM, works flawless on my 2015 rMBP with 16GB ram.

deeLow · 01-25-2016, 03:00 PM

Cjddjsjek

deeLow · 01-25-2016, 08:19 PM

Got it working. All came down to the com port settings.

Read 2 modules, saw some stuff in INPA. I'm gonna work on getting a full coding setup with V55 Datens, NCS Dummy, and English files in the VM. Also going to try getting NCS Expert updated to 4.0 along with better profile options.

nate16 · 01-26-2016, 10:41 PM

I'll make a VM. What tools would everyone like? I'm a senior infrastructure engineer by trade and can breeze through making a vm.

Thinking so far:
INPA + Standard Tools with latest Daten (WinKFP, NCSexpert, NCSDummy)
ISTA/P
ISTA/D (Rheingold)
E-SYS
ICOM Emulator for DCAN
ETK

Feel free to chime in with tools you'd like. Thinking a Windows 7 Base if everyone is ok with that.

deeLow · 01-26-2016, 11:54 PM

Quote:

Originally Posted by nate16

I'll make a VM. What tools would everyone like? I'm a senior infrastructure engineer by trade and can breeze through making a vm.

Thinking so far:
INPA + Standard Tools with latest Daten (WinKFP, NCSexpert, NCSDummy)
ISTA/P
ISTA/D (Rheingold)
E-SYS
ICOM Emulator for DCAN
ETK

Feel free to chime in with tools you'd like. Thinking a Windows 7 Base if everyone is ok with that.

If you can pull this off, I'd be so in for it.

The VM I got right now is coming together nicely but ISTA would be tits to have as well.

nate16 · 01-27-2016, 08:20 AM

I'm working on it right now -- Had to restart to change some crucial disk settings. This will be very large. Possibly as big as 180gb.

nate16 · 01-27-2016, 08:21 AM

I wanted to include the 2015-1 map upgrades for E and F series but that will add an additional ~50gb so I think I will leave it out for now.

nate16 · 01-27-2016, 09:52 AM

Any requests for Model Series to be built in?

May just start with a VM with just the E89 files and E-SYS for F series

drawz · 01-27-2016, 10:05 PM

Quote:

Originally Posted by nate16

Any requests for Model Series to be built in?

May just start with a VM with just the E89 files and E-SYS for F series

May as well make it complete if you're going through the effort. Or at least make it easy to add additional models. Personally I have an E90 and E61, so I'd love those two.

Thanks for your hard work on this! It would be a major asset to the community!

nate16 · 01-27-2016, 10:26 PM

So far, I've got E89 series which includes all e90's and e46. The reason for asking is because the size can just get so large. I will include all the datens v55 as well as rheingold 3.53 but NOT ista/p as the install for it alone is 181gb

01-06-2016, 08:38 PM	#1
rapco New Member 3 Rep 20 Posts Drives: 320i Join Date: May 2014 Location: Panamá City, Panamá iTrader: (0)	Idea -VM preloaded Hey! I used to have a working INPA on Windows 7 x64, with a very inexpensive cable from Amazon. My only laptop now runs Windows 10 x64, I can't get it to work. Do you think will be useful is I built a VM with the basics pre-configured in Virtual Box and share it to the forum members? Anyone have one already cause I can't find it in the search box? Legal matters I can think is you should have your own Windows XP licence as I would be using a generic one. __________________ Greets from Panama. Two 2009 320i, iDrive
	Appreciate 0 Tweet Quote

01-06-2016, 08:47 PM	#2
Banana Clipper Jewel Runner 344 Rep 914 Posts Drives: G01///G20///I20 Join Date: Dec 2015 Location: Bay Area iTrader: (2)	Oh god yes, if you like I can host a mirror in my Google Drive. I'm struggling to get the right combination of different software to get the damn thing to work properly. At the very least I'd be interested in the software if you can. I'll PM you
	Appreciate 0 Quote

01-06-2016, 10:48 PM	#3
wildcatcrazy Banned 529 Rep 1,527 Posts Drives: E90 335i Join Date: Oct 2013 Location: USA iTrader: (12) Garage List 2009 335i [0.00]	Give this set up a try. DIY: Setup BMW Standard Tools 2.12 on Windows XP > 10 http://www.e90post.com/forums/showthread.php?t=1204192
	Appreciate 0 Quote

01-07-2016, 07:55 PM	#4
rapco New Member 3 Rep 20 Posts Drives: 320i Join Date: May 2014 Location: Panamá City, Panamá iTrader: (0)	Thanks will try that and post back. __________________ Greets from Panama. Two 2009 320i, iDrive
	Appreciate 0 Quote

01-08-2016, 08:44 AM	#5
rapco New Member 3 Rep 20 Posts Drives: 320i Join Date: May 2014 Location: Panamá City, Panamá iTrader: (0)	I think I'm in the right track. So far I was able to get it to read the car status (Both Black Dots). I will be adding the DATEN files today or tomorrow, and run further tests. __________________ Greets from Panama. Two 2009 320i, iDrive
	Appreciate 0 Quote

01-10-2016, 01:52 PM	#6
deeLow DOPE 148 Rep 759 Posts Drives: F80 Join Date: Jan 2014 Location: Earth iTrader: (2)	I could definitely use this. My windows box has recently shit the bed, so all I have is my mac. A VM I could run on it would be awesome.
	Appreciate 0 Quote

01-13-2016, 09:39 AM	#7
rapco New Member 3 Rep 20 Posts Drives: 320i Join Date: May 2014 Location: Panamá City, Panamá iTrader: (0)	I got one I believe is working. However my two E90 are EURO specs and I installed a US INPA. Some modules communicates others does not and all units are imperial. I would like to share it thru a Private Torrent so we don´t have to deal with ads and clicks in shitty websites. Are you guys OK with that? __________________ Greets from Panama. Two 2009 320i, iDrive Last edited by rapco; 01-13-2016 at 01:47 PM..
	Appreciate 0 Quote

01-13-2016, 12:12 PM	#9
nate16 Banned 172 Rep 327 Posts Drives: 2017 F80 YMB ZCP Join Date: Sep 2015 Location: Peabody, MA iTrader: (1)	http://mhhauto.com/Thread-PORTABLE-N...ed-system-V3-0
	Appreciate 0 Quote

01-13-2016, 08:32 PM	#10
rapco New Member 3 Rep 20 Posts Drives: 320i Join Date: May 2014 Location: Panamá City, Panamá iTrader: (0)	Seems like I need to donate to join that forum. Do you have it? __________________ Greets from Panama. Two 2009 320i, iDrive
	Appreciate 0 Quote

01-24-2016, 08:03 PM	#11
deeLow DOPE 148 Rep 759 Posts Drives: F80 Join Date: Jan 2014 Location: Earth iTrader: (2)	Bump Welp, I tried connecting and get no dots. Maybe I have to go through some settings related to the cable.
	Appreciate 0 Quote

01-25-2016, 03:00 PM	#14
deeLow DOPE 148 Rep 759 Posts Drives: F80 Join Date: Jan 2014 Location: Earth iTrader: (2)	Cjddjsjek
	Appreciate 0 Quote

01-25-2016, 08:19 PM	#15
deeLow DOPE 148 Rep 759 Posts Drives: F80 Join Date: Jan 2014 Location: Earth iTrader: (2)	Got it working. All came down to the com port settings. Read 2 modules, saw some stuff in INPA. I'm gonna work on getting a full coding setup with V55 Datens, NCS Dummy, and English files in the VM. Also going to try getting NCS Expert updated to 4.0 along with better profile options.
	Appreciate 0 Quote

01-26-2016, 10:41 PM	#16
nate16 Banned 172 Rep 327 Posts Drives: 2017 F80 YMB ZCP Join Date: Sep 2015 Location: Peabody, MA iTrader: (1)	I'll make a VM. What tools would everyone like? I'm a senior infrastructure engineer by trade and can breeze through making a vm. Thinking so far: INPA + Standard Tools with latest Daten (WinKFP, NCSexpert, NCSDummy) ISTA/P ISTA/D (Rheingold) E-SYS ICOM Emulator for DCAN ETK Feel free to chime in with tools you'd like. Thinking a Windows 7 Base if everyone is ok with that.
	Appreciate 0 Quote

01-27-2016, 08:20 AM	#18
nate16 Banned 172 Rep 327 Posts Drives: 2017 F80 YMB ZCP Join Date: Sep 2015 Location: Peabody, MA iTrader: (1)	I'm working on it right now -- Had to restart to change some crucial disk settings. This will be very large. Possibly as big as 180gb.
	Appreciate 0 Quote

01-27-2016, 08:21 AM	#19
nate16 Banned 172 Rep 327 Posts Drives: 2017 F80 YMB ZCP Join Date: Sep 2015 Location: Peabody, MA iTrader: (1)	I wanted to include the 2015-1 map upgrades for E and F series but that will add an additional ~50gb so I think I will leave it out for now.
	Appreciate 0 Quote

01-27-2016, 09:52 AM	#20
nate16 Banned 172 Rep 327 Posts Drives: 2017 F80 YMB ZCP Join Date: Sep 2015 Location: Peabody, MA iTrader: (1)	Any requests for Model Series to be built in? May just start with a VM with just the E89 files and E-SYS for F series
	Appreciate 0 Quote

01-27-2016, 10:26 PM	#22
nate16 Banned 172 Rep 327 Posts Drives: 2017 F80 YMB ZCP Join Date: Sep 2015 Location: Peabody, MA iTrader: (1)	So far, I've got E89 series which includes all e90's and e46. The reason for asking is because the size can just get so large. I will include all the datens v55 as well as rheingold 3.53 but NOT ista/p as the install for it alone is 181gb
	Appreciate 0 Quote