Will +20/22/25mm in 19X10 rub for the e92?

Rchan. · 02-28-2008, 05:41 AM

Will +20/22/25mm in 19X10 rub for the e92?

I know it will depend on the design and rubber i put on too but will those offset work normally?

remmib · 02-28-2008, 07:15 AM

Will rub, but some some people are running +25 with rolled fenders.

BoostedBMW · 02-28-2008, 10:44 AM

Quote:

Originally Posted by remmib

Will rub, but some some people are running +25 with rolled fenders.

I have only seen some people running 19x9.5 +25, but are people running +25 on 19x10's now? I rolled the rears on my car for 19x10 +35's and the original owner of the wheels was rubbing on that setup without rolling the rears with only a 265.

montreal_bimmer · 02-28-2008, 11:21 AM

will rub stock... if you roll quite a bit, you should be fine....

wj4 · 02-28-2008, 11:27 AM

For sure, you have to roll the fenders, quite aggressively too I would imagine.

19x9.5 with 25 offset barely clears an E90 w/o rolling, the fenders on the E92 are not as flared out, so you do the math.

jay spec · 02-28-2008, 11:42 AM

it seems to vary slightly from car to car. for example, on my e90, i'm running 19x10 +25 in the rear w/ 265 toyo t1r's...no fender roll and no rub. however, this is cutting it close, and all information i've seen indicates significant rolling would be required on an e92 for the same setup.

02-28-2008, 05:41 AM	#1
Rchan. Private First Class 4 Rep 143 Posts Drives: 3 Join Date: Nov 2006 Location: Canada iTrader: (0)	Will +20/22/25mm in 19X10 rub for the e92? Will +20/22/25mm in 19X10 rub for the e92? I know it will depend on the design and rubber i put on too but will those offset work normally? __________________ Modding cars is worse than gambling, you'll lose for sure.
	Appreciate 0 Tweet Quote

02-28-2008, 07:15 AM	#2
remmib General 1584 Rep 29,215 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	Will rub, but some some people are running +25 with rolled fenders. __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

02-28-2008, 11:21 AM	#4
montreal_bimmer OEMconcept 179 Rep 5,593 Posts Drives: BMW Join Date: Feb 2006 Location: Canada \| USA iTrader: (6) Garage List 2006 325i [10.00]	will rub stock... if you roll quite a bit, you should be fine....
	Appreciate 0 Quote

02-28-2008, 11:27 AM	#5
wj4 Major General 356 Rep 7,719 Posts Drives: E90 manual 335i Join Date: Nov 2006 Location: Burbank, CA iTrader: (8)	For sure, you have to roll the fenders, quite aggressively too I would imagine. 19x9.5 with 25 offset barely clears an E90 w/o rolling, the fenders on the E92 are not as flared out, so you do the math.
	Appreciate 0 Quote

02-28-2008, 11:42 AM	#6
jay spec _________________ 55 Rep 3,584 Posts Drives: a 7-seater Join Date: Dec 2007 Location: SF Bay Area, CA iTrader: (0)	it seems to vary slightly from car to car. for example, on my e90, i'm running 19x10 +25 in the rear w/ 265 toyo t1r's...no fender roll and no rub. however, this is cutting it close, and all information i've seen indicates significant rolling would be required on an e92 for the same setup. __________________
	Appreciate 0 Quote