N55 jb4 and boost gauge question

ramseyd · 04-03-2016, 08:15 PM

Hello I have a 2011 335 and I want to get two step/anti lag but I'm unsure how or if it's possible. Also I'm looking into a boost gauge I like the P3 in vent gauge but was wondering if there's any type of flash or anything that will allow a gauge to appear in the factory nav unit.
Thank you

Dhillon92 · 04-03-2016, 10:05 PM

Boost gauges via obd may not be accurate with the jb4 installed, and may interrupt some data processing.

Personally I keep my fuel gauge hijacked with boost.

Also if you want a pneumatic boost gauge, you'll need to tap your charge pipe.

EB89 · 04-04-2016, 12:37 AM

You can buy the JB4 Connect Bluetooth Adaptor and display Boost and lots of other data on your smartphone.

hoaks808 · 04-05-2016, 03:51 AM

^ +1

Manberg · 04-06-2016, 12:11 AM

^+2

Thats what I have, works well with instant feedback. You can also check codes, update your firmware and change settings through the app and bypass the steering wheel controls. Although they still remain functional. Runs about $170 for the kit and app.

Edit: Some people use a tablet to display/run their JB4+info, witch I'm looking into buying specifically for car use. Some of the 7'' tablets fit snug in the nav screen hole on the dash. So you can just set it in there over your Nav, unless you wish to still see your map/radio.

I currently use a windshield mount for my iphone 6 that stuck in the lower left corner and extends out just over the vent above the light controls. Makes it easy to see while driving without having to look completely away from the road. Use the A pillar to rest the bendible arm against to prevent shaking/vibration.

mike@x-ph.com · 04-06-2016, 02:31 PM

Quote:

Originally Posted by ramseyd

Hello I have a 2011 335 and I want to get two step/anti lag but I'm unsure how or if it's possible. Also I'm looking into a boost gauge I like the P3 in vent gauge but was wondering if there's any type of flash or anything that will allow a gauge to appear in the factory nav unit.
Thank you

Not recommended to run boost gauge with the JB4, as mentioned above just monitor it on your phone using the connect kit

loesch · 04-06-2016, 03:12 PM

If you have an android phone it's much cheaper too.

f30luxline · 04-06-2016, 06:33 PM

Here's my setup. Works great using the app.

rob24ert · 04-10-2016, 04:05 PM

I also love my P3 gauge, however it CANNOT be run with JB4.

Jb4 is tricking the computers, P3 is trying to read the computer through OBD, it will cause issues.

Clinybug · 04-26-2016, 07:53 PM

Does your Oil temp and Water temp works ? (F30LuxLine)

Everfly · 04-26-2016, 09:30 PM

Oil temp work on my but I don't thing water temp available

04-03-2016, 08:15 PM	#1
ramseyd New Member 1 Rep 13 Posts Drives: E46 M3 Join Date: Apr 2013 Location: PA iTrader: (0)	N55 jb4 and boost gauge question Hello I have a 2011 335 and I want to get two step/anti lag but I'm unsure how or if it's possible. Also I'm looking into a boost gauge I like the P3 in vent gauge but was wondering if there's any type of flash or anything that will allow a gauge to appear in the factory nav unit. Thank you
	Appreciate 0 Tweet Quote

04-03-2016, 10:05 PM	#2
Dhillon92 Captain 82 Rep 605 Posts Drives: '11 335xi Join Date: Jul 2014 Location: Toronto iTrader: (0)	Boost gauges via obd may not be accurate with the jb4 installed, and may interrupt some data processing. Personally I keep my fuel gauge hijacked with boost. Also if you want a pneumatic boost gauge, you'll need to tap your charge pipe.
	Appreciate 0 Quote

04-04-2016, 12:37 AM	#3
EB89 Brigadier General 546 Rep 3,127 Posts Drives: 2011 335i e92 DCT Join Date: Sep 2015 Location: Australia, NSW iTrader: (0) Garage List 2011 BMW 335i e92 [0.00]	You can buy the JB4 Connect Bluetooth Adaptor and display Boost and lots of other data on your smartphone. __________________ / MHD Stage 2+ / AR CATLESS DP / PE MOD 4 INCH TIPS / BMR FMIC / K&N DROP IN / BMS CP /
	Appreciate 0 Quote

04-05-2016, 03:51 AM	#4
hoaks808 New Member 1 Rep 20 Posts Drives: 2011 335i AW M-Sport Join Date: Mar 2016 Location: Honolulu, HI iTrader: (0)	^ +1
	Appreciate 0 Quote

04-06-2016, 12:11 AM	#5
Manberg Second Lieutenant 89 Rep 239 Posts Drives: 2011 e90 335i Join Date: Aug 2013 Location: SoCal iTrader: (0)	^+2 Thats what I have, works well with instant feedback. You can also check codes, update your firmware and change settings through the app and bypass the steering wheel controls. Although they still remain functional. Runs about $170 for the kit and app. Edit: Some people use a tablet to display/run their JB4+info, witch I'm looking into buying specifically for car use. Some of the 7'' tablets fit snug in the nav screen hole on the dash. So you can just set it in there over your Nav, unless you wish to still see your map/radio. I currently use a windshield mount for my iphone 6 that stuck in the lower left corner and extends out just over the vent above the light controls. Makes it easy to see while driving without having to look completely away from the road. Use the A pillar to rest the bendible arm against to prevent shaking/vibration. __________________ M-Sport, 6MT, PPK, JB4 ISO + Rev.3, VRSF 7'' FMIC, VRSF Catless DP, BMS Charge Pipe, MFactory LSD, Öhlins R&T, M3 Control Arms, Rogue 6MT Bushings, Remus Exhaust, Duke Dynamics CF Diffuser, Cyba Scoops, VMR VB3 19s, BMS Clucth Stop Last edited by Manberg; 04-06-2016 at 12:16 AM..
	Appreciate 0 Quote

04-06-2016, 03:12 PM	#7
loesch Captain 133 Rep 917 Posts Drives: 2011 BMW 135i M Sport Join Date: Feb 2012 Location: State College, PA iTrader: (4)	If you have an android phone it's much cheaper too.
	Appreciate 0 Quote

04-06-2016, 06:33 PM	#8
f30luxline e92 - 335i 181 Rep 743 Posts Drives: thisonetimeatbandcamp Join Date: Nov 2013 Location: Orlando iTrader: (1)	Here's my setup. Works great using the app. Attached Images
	Appreciate 0 Quote

04-10-2016, 04:05 PM	#9
rob24ert First Lieutenant 86 Rep 394 Posts Drives: 2011 135i Join Date: Mar 2015 Location: Canada iTrader: (1)	I also love my P3 gauge, however it CANNOT be run with JB4. Jb4 is tricking the computers, P3 is trying to read the computer through OBD, it will cause issues.
	Appreciate 0 Quote

04-26-2016, 07:53 PM	#10
Clinybug Registered 0 Rep 3 Posts Drives: 335i Xdrive Coupe 2012 Join Date: Apr 2016 Location: Montréal iTrader: (0)	Does your Oil temp and Water temp works ? (F30LuxLine)
	Appreciate 0 Quote

04-26-2016, 09:30 PM	#11
Everfly Brigadier General 162 Rep 3,152 Posts Drives: BMW Join Date: Apr 2011 Location: Indianapolis iTrader: (51)	Oil temp work on my but I don't thing water temp available
	Appreciate 0 Quote