[Mik325tds]

I purchased a China ICOM A2 and have problems getting a connection to my E90 through D-CAN. The ICOM works well with K-Line on my E53. It came with the newest Firmware 01-40-05. I tried ITool Radar and EasyConnect and the connection to the ICOM is fine. I can lock it and get the Battery voltage indication in EasyConnect.
Tracing the D-CAN connection only shows a constant 0x130 message that is coming from the car - nothing from the ICOM.
Any suggestions?

[Levanime]

Did you manage to solve this problem?

[Sensible_]

What are you using? ISTA or connection via ediabas?

[Mik325tds]

Originally Posted by Sensible_

What are you using? ISTA or connection via ediabas?

I tried using either. Neither would work.
It turned out to be a defective ICOM. I returned it and bought a different one. The new one works without problems.

[bms5]

Originally Posted by Mik325tds

I tried using either. Neither would work.
It turned out to be a defective ICOM. I returned it and bought a different one. The new one works without problems.

I have a genuine BMW ICOM and am just getting started in the coding world with
BMW Standard Tools.
What port (or any other) settings do I need to change for it to connect into the ethernet port of my Dell laptop (Win XP)

[Mik325tds]

Originally Posted by bms5

I have a genuine BMW ICOM and am just getting started in the coding world with
BMW Standard Tools.
What port (or any other) settings do I need to change for it to connect into the ethernet port of my Dell laptop (Win XP)

Get IToolRadar and EasyConnect. It'll do it for you.