No auto-up on front windows, won't initialize in INPA

rothwem · 04-22-2016, 10:23 AM

My front windows go up and down just fine, but they will only auto-down, and they won't auto-up.

I tried all of the up/down/up/down/a/b/a/b stuff with no luck, so I plugged up INPA and tried initializing...the back windows went up and down just fine, but the fronts went down and didn't go back up. I was able to use the window switch to get them back up...but they wouldn't auto-up.

Anyone have this problem and successfully fix it? I've got a 2011 E91 xdrive if that makes any difference.

soldado331 · 04-22-2016, 11:21 AM

I had this same issue with my windows earlier this year after I had disconnected the battery terminal to clean my engine bay. I took it to BMW for a diagnosis cause I could not figure it out myself. Turns out the FRM (foot rest module) needed to be replaced. Seems the module is very sensitive to voltage changes. BMW wanted ~$1000 for part, labor, and coding

. I ended up buying a new FRM3 from an online BMW dealership and had it coded by a local guy. The part was not cheap ($350ish) but after the replacement and coding, my windows auto rolled like normal.

rothwem · 04-22-2016, 11:51 AM

Did all of your windows not going back up, or just the one?

soldado331 · 04-22-2016, 01:12 PM

I don't remember if it was all the windows but definitely the front windows did not work.

rothwem · 04-22-2016, 03:42 PM

Quote:

Originally Posted by soldado331

I don't remember if it was all the windows but definitely the front windows did not work.

hmm.

I'm not totally convinced that the problem is the FRM, I seem to be able to communicate with it okay with INPA. It just won't roll the front windows up after it rolls them down.

asquared · 06-06-2016, 10:32 PM

Any resolution to this? I'm having the same problem. Just took delivery of my car and the battery was dead as the guy tried to get it off the truck. Then I noticed only the driver side won't auto up and I was getting cc-is 125 for the rear right taillight. Apparently some of the LEDs aren't coming on. Not sure what is going on.

rothwem · 06-07-2016, 07:38 AM

Quote:

Originally Posted by asquared

Any resolution to this? I'm having the same problem. Just took delivery of my car and the battery was dead as the guy tried to get it off the truck. Then I noticed only the driver side won't auto up and I was getting cc-is 125 for the rear right taillight. Apparently some of the LEDs aren't coming on. Not sure what is going on.

Nope, its pretty annoying.

There's an anti-trap mechanism on the window regulator that I'm going to check next. I've got to pop the door panel off to get to the regulator though, and I'm dreading that.

MuddyCargo · 11-05-2021, 09:20 AM

Here I join with same problem… not able to initialise in INPA and ISTA… not error shown in FRM !!

04-22-2016, 10:23 AM	#1
rothwem Major 497 Rep 1,208 Posts Drives: 2009 BMW 328i Wagon Join Date: Apr 2009 Location: Asheville, NC iTrader: (0) Garage List 2009 BMW 328i [10.00]	No auto-up on front windows, won't initialize in INPA My front windows go up and down just fine, but they will only auto-down, and they won't auto-up. I tried all of the up/down/up/down/a/b/a/b stuff with no luck, so I plugged up INPA and tried initializing...the back windows went up and down just fine, but the fronts went down and didn't go back up. I was able to use the window switch to get them back up...but they wouldn't auto-up. Anyone have this problem and successfully fix it? I've got a 2011 E91 xdrive if that makes any difference.
	Appreciate 0 Tweet Quote

04-22-2016, 11:21 AM	#2
soldado331 Private 2 Rep 67 Posts Drives: '10 AW e90 335xi Join Date: Mar 2011 Location: southern CT iTrader: (0) Garage List 2010 335i x-drive [0.00]	I had this same issue with my windows earlier this year after I had disconnected the battery terminal to clean my engine bay. I took it to BMW for a diagnosis cause I could not figure it out myself. Turns out the FRM (foot rest module) needed to be replaced. Seems the module is very sensitive to voltage changes. BMW wanted ~$1000 for part, labor, and coding . I ended up buying a new FRM3 from an online BMW dealership and had it coded by a local guy. The part was not cheap ($350ish) but after the replacement and coding, my windows auto rolled like normal. __________________ '10 AW E90 335i X-DRIVE M-SPORT AFE DCI \| UR DPs \| BMW PE \| ALPINA B3 TRANS FLASH \| 10MM FRONT,12MM REAR ECS SPACERS \| M3 REAR SWAY BAR \| POWERFLEX REAR SUBFRAME BUSHINGS \| KONI YELLOWS
	Appreciate 0 Quote

04-22-2016, 11:51 AM	#3
rothwem Major 497 Rep 1,208 Posts Drives: 2009 BMW 328i Wagon Join Date: Apr 2009 Location: Asheville, NC iTrader: (0) Garage List 2009 BMW 328i [10.00]	Did all of your windows not going back up, or just the one?
	Appreciate 0 Quote

04-22-2016, 01:12 PM	#4
soldado331 Private 2 Rep 67 Posts Drives: '10 AW e90 335xi Join Date: Mar 2011 Location: southern CT iTrader: (0) Garage List 2010 335i x-drive [0.00]	I don't remember if it was all the windows but definitely the front windows did not work. __________________ '10 AW E90 335i X-DRIVE M-SPORT AFE DCI \| UR DPs \| BMW PE \| ALPINA B3 TRANS FLASH \| 10MM FRONT,12MM REAR ECS SPACERS \| M3 REAR SWAY BAR \| POWERFLEX REAR SUBFRAME BUSHINGS \| KONI YELLOWS
	Appreciate 0 Quote

06-06-2016, 10:32 PM	#6
asquared E39 134 Rep 286 Posts Drives: 2000 540i Join Date: May 2016 Location: Las Vegas, NV iTrader: (0)	Any resolution to this? I'm having the same problem. Just took delivery of my car and the battery was dead as the guy tried to get it off the truck. Then I noticed only the driver side won't auto up and I was getting cc-is 125 for the rear right taillight. Apparently some of the LEDs aren't coming on. Not sure what is going on.
	Appreciate 0 Quote

11-05-2021, 09:20 AM	#8
MuddyCargo Registered 0 Rep 2 Posts Drives: BMW Series 3 Join Date: Oct 2021 Location: Australia iTrader: (0)	Here I join with same problem… not able to initialise in INPA and ISTA… not error shown in FRM !!
	Appreciate 0 Quote