New Best Way to golf tee....or a stupid 15 year old mod?

McLuVan · 03-13-2008, 12:32 AM

i did this so no shit gets into the tubes
andddddddddddd
easier to take off when i go to the dealer

McLuVan · 03-13-2008, 12:32 AM

btw.......
its just pinched and zip tied

McLuVan · 03-13-2008, 12:37 AM

no one?

McLuVan · 03-13-2008, 12:37 AM

no codes btw

Dan335i · 03-13-2008, 02:19 AM

This has been done already.

Ryan(e92) · 03-13-2008, 02:35 AM

old news keropi

Mattscott · 03-13-2008, 02:36 AM

That is what i did, golf tee mod is just a generic name for the mod, some use bb's ball bearings, zip ties, screws. it's all been done.

sambonator · 03-13-2008, 03:20 AM

Here's the original:

http://www.e90post.com/forums/showpo...4&postcount=24

ChaneRZ · 03-13-2008, 03:26 AM

i ziptied mine

Blue Streak · 03-13-2008, 10:14 AM

I just followed some other DIY and unplugged some plug that was somewhere near my left rear tail light. It just keeps the left tail pipe open (like a butterfly valve) at all times. It's a bit easier than all the other ways that involve golf tee and zip ties. I've I'm taking it in for service, I just plug that thing back in and I'm back to stock. There's no CEL's or anything ever.

e90AW335i · 03-13-2008, 10:31 AM

I put a ball bearing in there and it works fine as well....

BMW///Motorsport · 03-13-2008, 03:02 PM

Quote:

Originally Posted by Blue Streak

I just followed some other DIY and unplugged some plug that was somewhere near my left rear tail light. It just keeps the left tail pipe open (like a butterfly valve) at all times. It's a bit easier than all the other ways that involve golf tee and zip ties. I've I'm taking it in for service, I just plug that thing back in and I'm back to stock. There's no CEL's or anything ever.

+1

letterkills155 · 03-13-2008, 03:19 PM

^ the deal still knows you did it when they take in for service

Icedog_16 · 03-13-2008, 04:02 PM

If you have a small enough zip tie, you don't even have to kink it. I used a 'stealth' (black

) one from my RC cars.

0utlier · 03-13-2008, 05:16 PM

Go to home depot. Get a 7/32 socket set screw. Use allen wrench to install set screw into rubber tube deep enough to put tube back onto exhaust . If you want to remove set screw just unscrew it at any time. Simple and quick.

benyl · 03-13-2008, 05:17 PM

I used a screw cover (little rubber thing) that you buy from Home Depot. $0.20

Cap the metal with the rubber thing. Put the hose back on over the rubber. Works like a charm.

DanMardik · 03-13-2008, 05:39 PM

used a pellet

McLuVan · 03-13-2008, 07:07 PM

oh darn
i thought i discovered something

200Duece · 03-13-2008, 07:21 PM

I used plastic BB. Nice try though

Redadair · 03-13-2008, 07:27 PM

Quote:

Originally Posted by BMW///Motorsport

+1

+1

This photo is from changing my Black Lines. If you look at the two sets of wires, one if for the Tail Light the other is the Plug for the Exhaust. Very easy to do.

Red

McLuVan · 03-13-2008, 07:30 PM

um
doesnt that leave codes?

Mattscott · 03-13-2008, 07:37 PM

it doesnt show on the cluster, but yes it does

03-13-2008, 12:32 AM	#1
McLuVan Lieutenant General 315 Rep 13,094 Posts Drives: ///M3 Join Date: Jan 2008 Location: Socal~818~ iTrader: (1)	New Best Way to golf tee....or a stupid 15 year old mod? i did this so no shit gets into the tubes andddddddddddd easier to take off when i go to the dealer __________________
	Appreciate 0 Tweet Quote

03-13-2008, 12:32 AM	#2
McLuVan Lieutenant General 315 Rep 13,094 Posts Drives: ///M3 Join Date: Jan 2008 Location: Socal~818~ iTrader: (1)	btw....... its just pinched and zip tied __________________
	Appreciate 0 Quote

03-13-2008, 12:37 AM	#3
McLuVan Lieutenant General 315 Rep 13,094 Posts Drives: ///M3 Join Date: Jan 2008 Location: Socal~818~ iTrader: (1)	no one? __________________
	Appreciate 0 Quote

03-13-2008, 12:37 AM	#4
McLuVan Lieutenant General 315 Rep 13,094 Posts Drives: ///M3 Join Date: Jan 2008 Location: Socal~818~ iTrader: (1)	no codes btw __________________
	Appreciate 0 Quote

03-13-2008, 02:19 AM	#5
Dan335i Lieutenant Colonel 33 Rep 1,786 Posts Drives: 07 335i coupe 6MT,w/sp. pack. Join Date: Oct 2007 Location: orange county NY iTrader: (2)	This has been done already.
	Appreciate 0 Quote

03-13-2008, 02:35 AM	#6
Ryan(e92) Captain 17 Rep 705 Posts Drives: SG M6 coupe Join Date: Oct 2006 Location: Newport Beach iTrader: (6)	old news keropi
	Appreciate 0 Quote

03-13-2008, 02:36 AM	#7
Mattscott Major General 110 Rep 8,327 Posts Drives: 2007 335i E90 Join Date: Aug 2007 Location: Beaumont, CA iTrader: (2)	That is what i did, golf tee mod is just a generic name for the mod, some use bb's ball bearings, zip ties, screws. it's all been done. __________________ Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(e90post.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
	Appreciate 0 Quote

03-13-2008, 03:20 AM	#8
sambonator Samtaro! 130 Rep 2,609 Posts Drives: 2014 F32 N55 Alpinweiß Join Date: May 2007 Location: Newport Beach, CA, USA iTrader: (7)	Here's the original: http://www.e90post.com/forums/showpo...4&postcount=24 __________________
	Appreciate 0 Quote

03-13-2008, 03:26 AM	#9
ChaneRZ If You Aint First, You're last !!! 106 Rep 2,508 Posts Drives: 08 BMW 335i, 01 Honda Prelude Join Date: Sep 2007 Location: California iTrader: (0)	i ziptied mine __________________ 08 BMW BSM 335i 6MT (Sports, Premium, NAV, PDC, AS, IPOD, HD Radio, Rear Sunshade, OEM Alarm) Angel iBright V3, Luminics Fog Bulb, Turbo Tuner, K&N Drop in Filter, Dinan Exhaust, Dinan Pedals, Vorsteiner CF Front Lip, and CF Rear Diffuser. Ordered:08/25/07 Started: 09/09/07 Finished: 09/14/07 On Ship: 09/15/07 Arrived: 10/08/07 Delivered: 10/10/07
	Appreciate 0 Quote

03-13-2008, 10:14 AM	#10
Blue Streak Gunny 31 Rep 623 Posts Drives: '07 E90 335i 6MT, 2016 F10 535 Join Date: Sep 2007 Location: San Diego, CA iTrader: (0) Garage List 2007 E90 335i [9.00]	I just followed some other DIY and unplugged some plug that was somewhere near my left rear tail light. It just keeps the left tail pipe open (like a butterfly valve) at all times. It's a bit easier than all the other ways that involve golf tee and zip ties. I've I'm taking it in for service, I just plug that thing back in and I'm back to stock. There's no CEL's or anything ever. __________________ 2007 E90 335i 6MT, ZSP, Nav, PDC, CA, Montego Blue, Terra Dakota leather, CDV, clutch-stop, E46 M Shift Knob, Logic HVI, JB4 PnP, MS 3" downpipes, Koni Yellow adjustable sport shocks, RE 12mm(f)/BMS 15mm(r) spacers, Blacklines, LUX 5.0 LED halo ring lights, DAEOS (Vista) harness, GP Thunder 7500k fogs, 35% sides-20% rear tint, matt black kidney grill, matt black 335i trunk badge
	Appreciate 0 Quote

03-13-2008, 10:31 AM	#11
e90AW335i Major General 149 Rep 6,608 Posts Drives: e90 335i Join Date: Sep 2007 Location: ...... iTrader: (4)	I put a ball bearing in there and it works fine as well.... __________________ I install all tunes, intakes, o2 simms, and most cosmetic mods. PM me for a quote.
	Appreciate 0 Quote

03-13-2008, 03:19 PM	#13
letterkills155 Second Lieutenant 9 Rep 228 Posts Drives: 08 e92 335i Join Date: Feb 2007 Location: st.louis iTrader: (0) Garage List 08 335i [0.00]	^ the deal still knows you did it when they take in for service
	Appreciate 0 Quote

03-13-2008, 04:02 PM	#14
Icedog_16 No Member 8 Rep 428 Posts Drives: 2011 E92 335is Join Date: Feb 2008 Location: Tampa, FL iTrader: (1)	If you have a small enough zip tie, you don't even have to kink it. I used a 'stealth' (black ) one from my RC cars.
	Appreciate 0 Quote

03-13-2008, 05:16 PM	#15
0utlier Private 0 Rep 62 Posts Drives: X3 XDrive35i Join Date: Feb 2008 Location: Hattiesburg, MS iTrader: (0)	Go to home depot. Get a 7/32 socket set screw. Use allen wrench to install set screw into rubber tube deep enough to put tube back onto exhaust . If you want to remove set screw just unscrew it at any time. Simple and quick.
	Appreciate 0 Quote

03-13-2008, 05:17 PM	#16
benyl Lieutenant 6 Rep 408 Posts Drives: '08 335i, '10 W204 w/m156 Join Date: Nov 2007 Location: Calgary iTrader: (0)	I used a screw cover (little rubber thing) that you buy from Home Depot. $0.20 Cap the metal with the rubber thing. Put the hose back on over the rubber. Works like a charm. __________________ E92 335iA, AW on BLK, Al trim, Premium, Nav, 6FL, CA, Sport, PDC, Paddles... W204 C63, OBS on BLK, Carbon Trim, Premium, Performance, Rev Cam, and stock exhaust...
	Appreciate 0 Quote

03-13-2008, 05:39 PM	#17
DanMardik Captain 17 Rep 729 Posts Drives: 08 INFINITI G37S Join Date: Dec 2006 Location: Irvine, CA iTrader: (0)	used a pellet __________________ *RIP 2007 335i Sedan*
	Appreciate 0 Quote

03-13-2008, 07:07 PM	#18
McLuVan Lieutenant General 315 Rep 13,094 Posts Drives: ///M3 Join Date: Jan 2008 Location: Socal~818~ iTrader: (1)	oh darn i thought i discovered something __________________
	Appreciate 0 Quote

03-13-2008, 07:21 PM	#19
200Duece Colonel 45 Rep 2,575 Posts Drives: '73 2002,'18 X5 35d,'17 328d T Join Date: Jan 2007 Location: A Whale's Vagina, Ca iTrader: (5)	I used plastic BB. Nice try though
	Appreciate 0 Quote

03-13-2008, 07:30 PM	#21
McLuVan Lieutenant General 315 Rep 13,094 Posts Drives: ///M3 Join Date: Jan 2008 Location: Socal~818~ iTrader: (1)	um doesnt that leave codes? __________________
	Appreciate 0 Quote

03-13-2008, 07:37 PM	#22
Mattscott Major General 110 Rep 8,327 Posts Drives: 2007 335i E90 Join Date: Aug 2007 Location: Beaumont, CA iTrader: (2)	it doesnt show on the cluster, but yes it does __________________ Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(e90post.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
	Appreciate 0 Quote