N55 Stock OEM Downpipe

orteeze · 07-12-2016, 10:35 AM

I know this is not the area. I'm targeting some owners that might have a stock N55 OEM downpipe laying around. I have one, but my studs are broken and I need to make a dealer visit. If you have one you'd like to sell cheap! Let me know.

Thanks!

Cory S · 07-12-2016, 01:53 PM

I have one. What do you consider cheap? These units are stainless steel and very expensive to replace.

orteeze · 07-12-2016, 02:08 PM

Cory S, are the studs in good shape?

Cory S · 07-12-2016, 02:11 PM

Quote:

Originally Posted by orteeze

Cory S, are the studs in good shape?

oh yea...

weehe126 · 07-12-2016, 02:18 PM

tbh I have one, but wouldn't sell it for less than $400+shipping.I think they are around a grand new.

Schmidty335i · 07-13-2016, 02:06 PM

damn i didnt think they were worth that much. i have one in a box at home that i pulled off the car when i had 10k miles on it. i was about to throw it away happy i kept it now. i will put mine up for sale when i get back, but i am in Muscat Oman until september and my car is in San Diego. i would be willing to let mine go for 200 shipped.

orteeze · 07-13-2016, 04:08 PM

I'd sell mine for 400+ shipping right now! I'll even knock off 50 bucks for two broken studs!

weehe126 · 07-13-2016, 04:42 PM

Quote:

Originally Posted by orteeze

I'd sell mine for 400+ shipping right now! I'll even knock off 50 bucks for two broken studs!

lol, the whole point of being able to sell it is that it is useful. Actually having the studs to install

orteeze · 07-13-2016, 07:33 PM

I can knock the studs out and use bolts. I just don't want to raise any eyebrows when they look under the car. If someone wants to help me out, great! 400 is rediculous. Before long these downpipes won't be able to sell just like N54 downpipes.

orteeze · 07-15-2016, 08:01 AM

If someone does me a solid for a decent price I'll remove and send it back to you. I have until Sept 2nd to get the car to the dealer.

JETmn · 07-15-2016, 09:53 AM

Quote:

Originally Posted by orteeze

I can knock the studs out and use bolts. I just don't want to raise any eyebrows when they look under the car. If someone wants to help me out, great! 400 is rediculous. Before long these downpipes won't be able to sell just like N54 downpipes.

Nobody is going to look to see if there are bolts vs. studs on the downpipe. Make sure the bolts are shiny and you are good to go. Toss a little paint on them if you have to.

orteeze · 07-15-2016, 05:08 PM

Quote:

Originally Posted by JETmn

Nobody is going to look to see if there are bolts vs. studs on the downpipe. Make sure the bolts are shiny and you are good to go. Toss a little paint on them if you have to.

You sound confident... are you a tech?

weehe126 · 07-15-2016, 06:39 PM

even if they saw it, it is a stock dp. why would they care?

orteeze · 07-15-2016, 07:08 PM

It's a warranty repair for a rear main. My local dealer is known to deny warranty work for mods.

weehe126 · 07-15-2016, 09:26 PM

So you tell them the nuts rusted off and you had it repaired... They can't deny you for a rear main because you have a rusty cat.

DoctoRx · 07-15-2016, 10:32 PM

Quote:

Originally Posted by weehe126

tbh I have one, but wouldn't sell it for less than $400+shipping.I think they are around a grand new.

Quote:

Originally Posted by orteeze

I'd sell mine for 400+ shipping right now! I'll even knock off 50 bucks for two broken studs!

This is a joke right? Most aftermarket DP don't cost this much, you should be able to get an N55 DP for $100-$200. I've got one laying around at my place now but I think I have a buyer lined up for it already.

OP, you probably won't even need to change out your DP. I've gone back to the dealer a few times now and I have FMIC, DP, CP and Cobb V3. Last time I don't even think I flashed it back to stock. If you still have CPO I'd recommend getting the N55 DP Fix. And if you're looking for what to do next on your build, I recommend suspension work.

orteeze · 07-15-2016, 10:36 PM

Quote:

Originally Posted by DoctoRx

This is a joke right? Most aftermarket DP don't cost this much, you should be able to get an N55 DP for $100-$200. I've got one laying around at my place now but I think I have a buyer lined up for it already.

OP, you probably won't even need to change out your DP. I've gone back to the dealer a few times now and I have FMIC, DP, CP and Cobb V3. Last time I don't even think I flashed it back to stock. If you still have CPO I'd recommend getting the N55 DP Fix. And if you're looking for what to do next on your build, I recommend suspension work.

Of course it was a joke. I actually found one from the forum. I'm trying to eliminate any chance of the warranty work getting denied.

DoctoRx · 07-15-2016, 11:57 PM

Quote:

Originally Posted by orteeze

Of course it was a joke. I actually found one from the forum. I'm trying to eliminate any chance of the warranty work getting denied.

Unless you've got an extremely dick service dealer you should be fine for any work that can't be directly affected by modifications. Oil changes, routine maintenance etc shouldn't be an issue. I'd assume you're probably good for everything up until you get a fuel pump failure from running e85 - they might not like that.

JETmn · 07-18-2016, 11:05 AM

Quote:

Originally Posted by DoctoRx

Unless you've got an extremely dick service dealer you should be fine for any work that can't be directly affected by modifications. Oil changes, routine maintenance etc shouldn't be an issue. I'd assume you're probably good for everything up until you get a fuel pump failure from running e85 - they might not like that.

Yes, there is a law in place that prevents that. Look up the Magnuson–Moss Warranty Act. It puts he onus on the manufacturer to prove the modifications you did caused the failure.

07-12-2016, 10:35 AM	#1
orteeze Major 225 Rep 1,082 Posts Drives: 2018 YMB F80 Join Date: Sep 2014 Location: Alabama iTrader: (14)	N55 Stock OEM Downpipe I know this is not the area. I'm targeting some owners that might have a stock N55 OEM downpipe laying around. I have one, but my studs are broken and I need to make a dealer visit. If you have one you'd like to sell cheap! Let me know. Thanks! __________________ 2008 MB 335i-SOLD 2011 AW 335i M Sport- SOLD 2011 BSP 335i-SOLD 2011 BSP 335is- FOR SALE 2018 YMB M3- Current
	Appreciate 0 Tweet Quote

07-12-2016, 01:53 PM	#2
Cory S Major 306 Rep 1,163 Posts Drives: 2011 335i-X Join Date: Oct 2015 Location: N.H. iTrader: (0)	I have one. What do you consider cheap? These units are stainless steel and very expensive to replace. __________________ 2011 335i X-drive 6AT / Pure turbo / 500AWHP/526TQ
	Appreciate 0 Quote

07-12-2016, 02:08 PM	#3
orteeze Major 225 Rep 1,082 Posts Drives: 2018 YMB F80 Join Date: Sep 2014 Location: Alabama iTrader: (14)	Cory S, are the studs in good shape?
	Appreciate 0 Quote

07-12-2016, 02:18 PM	#5
weehe126 Brigadier General 1189 Rep 3,228 Posts Drives: 2017 340i Join Date: Apr 2014 Location: San Antonio iTrader: (2)	tbh I have one, but wouldn't sell it for less than $400+shipping.I think they are around a grand new.
	Appreciate 0 Quote

07-13-2016, 02:06 PM	#6
Schmidty335i Lieutenant 43 Rep 412 Posts Drives: E92 335i PS2 turbo FBO JB4 Join Date: Jun 2014 Location: San Diego iTrader: (0)	damn i didnt think they were worth that much. i have one in a box at home that i pulled off the car when i had 10k miles on it. i was about to throw it away happy i kept it now. i will put mine up for sale when i get back, but i am in Muscat Oman until september and my car is in San Diego. i would be willing to let mine go for 200 shipped.
	Appreciate 0 Quote

07-13-2016, 04:08 PM	#7
orteeze Major 225 Rep 1,082 Posts Drives: 2018 YMB F80 Join Date: Sep 2014 Location: Alabama iTrader: (14)	I'd sell mine for 400+ shipping right now! I'll even knock off 50 bucks for two broken studs! __________________ 2008 MB 335i-SOLD 2011 AW 335i M Sport- SOLD 2011 BSP 335i-SOLD 2011 BSP 335is- FOR SALE 2018 YMB M3- Current
	Appreciate 0 Quote

07-13-2016, 07:33 PM	#9
orteeze Major 225 Rep 1,082 Posts Drives: 2018 YMB F80 Join Date: Sep 2014 Location: Alabama iTrader: (14)	I can knock the studs out and use bolts. I just don't want to raise any eyebrows when they look under the car. If someone wants to help me out, great! 400 is rediculous. Before long these downpipes won't be able to sell just like N54 downpipes.
	Appreciate 0 Quote

07-15-2016, 08:01 AM	#10
orteeze Major 225 Rep 1,082 Posts Drives: 2018 YMB F80 Join Date: Sep 2014 Location: Alabama iTrader: (14)	If someone does me a solid for a decent price I'll remove and send it back to you. I have until Sept 2nd to get the car to the dealer.
	Appreciate 0 Quote

07-15-2016, 06:39 PM	#13
weehe126 Brigadier General 1189 Rep 3,228 Posts Drives: 2017 340i Join Date: Apr 2014 Location: San Antonio iTrader: (2)	even if they saw it, it is a stock dp. why would they care?
	Appreciate 0 Quote

07-15-2016, 07:08 PM	#14
orteeze Major 225 Rep 1,082 Posts Drives: 2018 YMB F80 Join Date: Sep 2014 Location: Alabama iTrader: (14)	It's a warranty repair for a rear main. My local dealer is known to deny warranty work for mods.
	Appreciate 0 Quote

07-15-2016, 09:26 PM	#15
weehe126 Brigadier General 1189 Rep 3,228 Posts Drives: 2017 340i Join Date: Apr 2014 Location: San Antonio iTrader: (2)	So you tell them the nuts rusted off and you had it repaired... They can't deny you for a rear main because you have a rusty cat.
	Appreciate 0 Quote