Exhaust tips replacement

WERKE · 03-27-2008, 11:35 AM

Hi guys, I try to exhaust tip with a diameter of 3.75 to 4 inches to replace those on the existing 335i E92. I think those of a little smaller.

Can anyone provide me with a product number or address to find what I want.

dimisa1977 · 03-30-2008, 02:11 PM

i am working on the same project...

http://www.e90post.com/forums/showthread.php?t=130032

you've seen the actuator electrical connection post too, yes?

http://www.e90post.com/forums/showth...light=golf+tee

I JUST SAVED ABOUT 2K, Tips 150, and Better Vroom Vroom Sound, FREE!

WERKE · 03-31-2008, 09:04 PM

Quote:

Originally Posted by dimisa1977

i am working on the same project...

http://www.e90post.com/forums/showthread.php?t=130032

you've seen the actuator electrical connection post too, yes?

http://www.e90post.com/forums/showth...light=golf+tee

I JUST SAVED ABOUT 2K, Tips 150, and Better Vroom Vroom Sound, FREE!

Thank's dimisa, very helpfull!

dimisa1977 · 04-01-2008, 09:59 PM

PM sent

Rugs · 04-20-2008, 12:04 AM

I had 4" double wall slash-cut SS tips welded on while retaining the exhaust valve on the drivers side. I also have UR catless DP's w/ the stock exhaust retaining the secondary cats.
IMO, it's a good balance of Power, Sound, Simplicity & Looks. Same appearance, much cheaper and as good or better performance than the aftermarket cat back exhausts...

dimisa1977 · 04-20-2008, 08:17 AM

Quote:

Originally Posted by Rugs

I had 4" double wall slash-cut SS tips welded on while retaining the exhaust valve on the drivers side. I also have UR catless DP's w/ the stock exhaust retaining the secondary cats IMO, I think it's a good balance of Power, Sound, Simplicity & Looks. Same appearance, much cheaper and as good or better performance than the aftermarket cat back exhausts...

NICE! I agree

Any video of the sound of the stock exhaust on steroids?

03-27-2008, 11:35 AM	#1
WERKE President Directeur General 73 Rep 246 Posts Drives: F82 M4/ E92 M3 ESS/F-type R Join Date: Mar 2007 Location: Somewhere over the rainbow iTrader: (1)	Exhaust tips replacement Hi guys, I try to exhaust tip with a diameter of 3.75 to 4 inches to replace those on the existing 335i E92. I think those of a little smaller. Can anyone provide me with a product number or address to find what I want.
	Appreciate 0 Tweet Quote

03-30-2008, 02:11 PM	#2
dimisa1977 Major 57 Rep 1,137 Posts Drives: BMW Specialist (exhaust) Join Date: Mar 2008 Location: USA iTrader: (3) Garage List 2008 BMW [0.00] 2008 BMW [0.00]	i am working on the same project... http://www.e90post.com/forums/showthread.php?t=130032 you've seen the actuator electrical connection post too, yes? http://www.e90post.com/forums/showth...light=golf+tee I JUST SAVED ABOUT 2K, Tips 150, and Better Vroom Vroom Sound, FREE!
	Appreciate 0 Quote

04-01-2008, 09:59 PM	#4
dimisa1977 Major 57 Rep 1,137 Posts Drives: BMW Specialist (exhaust) Join Date: Mar 2008 Location: USA iTrader: (3) Garage List 2008 BMW [0.00] 2008 BMW [0.00]	PM sent
	Appreciate 0 Quote

04-20-2008, 12:04 AM	#5
Rugs Lieutenant 47 Rep 502 Posts Drives: E93 335i Join Date: Jul 2007 Location: Southeast U.S. iTrader: (2)	I had 4" double wall slash-cut SS tips welded on while retaining the exhaust valve on the drivers side. I also have UR catless DP's w/ the stock exhaust retaining the secondary cats. IMO, it's a good balance of Power, Sound, Simplicity & Looks. Same appearance, much cheaper and as good or better performance than the aftermarket cat back exhausts... __________________ "WorldsQuickest 335i E93" SMART-Top /One-Off Opaque Vinyl EYELIDS / 30% TINT / A.C.SCHNITZER Pedals / "M" Tri-Color Wheel w/Paddles / EIBACH Pro-Kit / AKEBONA F. & EBC RED-STUFF R.Dustless Pads / Drilled & Slotted ROTORS / MIRO M6 Reps / MICHELIN PS2's / U.R.Coated DP's / CYBA-QUAD Exhaust Tips / BMS-TUNED... Last edited by Rugs; 04-20-2008 at 04:54 PM..
	Appreciate 0 Quote