|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Stumbling Idle
|
|
09-08-2016, 12:37 AM | #1 |
New Member
8
Rep 21
Posts |
Stumbling Idle
So this just started on Thursday and I'm kind of at a loss on what to do next. I already replaced the MAP sensor, decarbon the intake manifold and throttle body replaced coils and plugs... Any help would be appreciated. Thanks
|
09-08-2016, 11:40 AM | #5 |
New Member
8
Rep 21
Posts |
|
Appreciate
0
|
09-08-2016, 12:15 PM | #6 |
Captain
233
Rep 646
Posts
Drives: 2010 E92 335i
Join Date: Apr 2008
Location: Goleta, CA
|
Is it a rough idle? Does the engine shake erratically when it does that? I had a similar thing happen to me and it was bad injectors.
|
Appreciate
0
|
09-08-2016, 12:46 PM | #7 |
New Member
8
Rep 21
Posts |
No it's not a rough idle. It sometimes corrects itself if i let it idle for a while. It got better when I replaced the coils and spark plugs but it's still there. Very annoying when sitting in traffic or next to a mustang at a red light thinking I'm trying to race him. No misfires under full throttle pulls like a champ just the idle is driving me nuts.
|
Appreciate
0
|
09-08-2016, 01:16 PM | #8 |
ST
5
Rep 23
Posts |
Have you tried reading codes?
I have a Schawben scan tool that is capable of adaptation resets. Located in Downey also. Last edited by alpin3d3vil335; 09-08-2016 at 01:22 PM.. |
Appreciate
0
|
09-08-2016, 02:05 PM | #9 |
Lieutenant
105
Rep 544
Posts |
|
Appreciate
0
|
09-08-2016, 03:52 PM | #11 |
New Member
8
Rep 21
Posts |
|
Appreciate
0
|
09-08-2016, 03:55 PM | #13 |
New Member
8
Rep 21
Posts |
Never stalled it almost wants to shut off though but it catches itself and eventually smooths itself out. It pulls hard through all gears and after pushing it hard it will idle fine for a bit and then the idle starts to stumble. It's never consistent either the stumbling will start very light, get heavy then light again and if left sitting long enough it will fix itself
|
Appreciate
0
|
09-08-2016, 04:31 PM | #14 |
ST
5
Rep 23
Posts |
PM me.
Last edited by alpin3d3vil335; 09-08-2016 at 04:41 PM.. |
Appreciate
0
|
09-08-2016, 04:36 PM | #15 |
Brigadier General
1266
Rep 4,175
Posts
Drives: 330i, 135i
Join Date: Feb 2006
Location: San Diego CA
|
check for vacuum leaks. Maybe something is not back in place. hoses etc...
any codes? |
Appreciate
0
|
09-08-2016, 07:07 PM | #16 |
New Member
8
Rep 21
Posts |
|
Appreciate
0
|
09-08-2016, 07:54 PM | #18 |
Brigadier General
1266
Rep 4,175
Posts
Drives: 330i, 135i
Join Date: Feb 2006
Location: San Diego CA
|
The problem is that even if they get one they wont know how to use it...
|
Appreciate
0
|
10-19-2016, 07:17 PM | #20 |
New Member
8
Rep 21
Posts |
Throttle body map sensor replaced, map sensor on the piping was cleaned, fuel pressure regulator replaced still having the idle problem. anything else that I'm missing?
|
Appreciate
0
|
10-19-2016, 09:01 PM | #21 |
Private First Class
31
Rep 142
Posts |
I had the exact same problem. Its the injectors. I was not getting any codes either. After i got 6 new index 12 injectors and got them coded, the problem was fixed.
|
Appreciate
0
|
10-20-2016, 10:39 AM | #22 | |
New Member
8
Rep 21
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|