Coding Error When Activating Alarm System

KurtYYC · 11-09-2016, 03:57 PM

Hi all,

i finally got a good quality cable from one stop electronics and started coding my OEM alarm so it would be activated. I edited the DWAI and DWAS modules no problem, but got an error message when I went to complete the CAS module. Anyone have any insights on this?

Error was:

Error in CABD! Look at CABLERR and ERROR.LOG!

COAPI-1043: error during processing CBD-file CAS3.C06

The Error Log file says the following:

ERROR! Modul: COAPI.CPP, Proc: coapiGetAbsPathInfo, LineNr: 01, ErrorNr: 1000
COAPI-1000: error

ERROR! Modul: COAPI.CPP, Proc: coapiGetAbsPathInfo, LineNr: 01, ErrorNr: 1000
COAPI-1000: error
ERROR! Modul: CBD_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 40.
003003'01,SONDERTASTE_PANIKALARM (744d, 2E8h)

ERROR! Modul: CDH.C, Proc: CDHGetNettoDataFromCbd, LineNr: 01, ErrorNr: 1043
COAPI-1043: error during processing CBD-file
CAS3.C06

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 1043
SG_CODIEREN

ERROR! Modul: COAPI.CPP, Proc: coapiGetAbsPathInfo, LineNr: 01, ErrorNr: 1000
COAPI-1000: error
ERROR! Modul: CBD_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 40.
003003'01,SONDERTASTE_PANIKALARM (744d, 2E8h)

ERROR! Modul: CDH.C, Proc: CDHGetNettoDataFromCbd, LineNr: 01, ErrorNr: 1043
COAPI-1043: error during processing CBD-file
CAS3.C06

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 1043
SG_CODIEREN

Sensible_ · 11-10-2016, 01:14 AM

What items have you coded and what are you trying to code? Can you code CAS back to default with expertmode?

Sensible_ · 11-10-2016, 04:57 AM

Actually what are you trying to do? Alarm Retrofit? Did you VO code the car with option 302?

KurtYYC · 11-11-2016, 09:36 PM

Hi Sensible,

I was coding in the OEM alarm that I installed so it was active. I actually figured out my error. SONDERTASTE_PANIKALARM needed to be changed to panikalarm and I had incorrectly changed it to aktiv.

Thanks for trying to help!

11-09-2016, 03:57 PM	#1
KurtYYC New Member 4 Rep 10 Posts Drives: 2007 328xi Join Date: Jan 2016 Location: Calgary iTrader: (0)	Coding Error When Activating Alarm System Hi all, i finally got a good quality cable from one stop electronics and started coding my OEM alarm so it would be activated. I edited the DWAI and DWAS modules no problem, but got an error message when I went to complete the CAS module. Anyone have any insights on this? Error was: Error in CABD! Look at CABLERR and ERROR.LOG! COAPI-1043: error during processing CBD-file CAS3.C06 The Error Log file says the following: ERROR! Modul: COAPI.CPP, Proc: coapiGetAbsPathInfo, LineNr: 01, ErrorNr: 1000 COAPI-1000: error ERROR! Modul: COAPI.CPP, Proc: coapiGetAbsPathInfo, LineNr: 01, ErrorNr: 1000 COAPI-1000: error ERROR! Modul: CBD_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 40. 003003'01,SONDERTASTE_PANIKALARM (744d, 2E8h) ERROR! Modul: CDH.C, Proc: CDHGetNettoDataFromCbd, LineNr: 01, ErrorNr: 1043 COAPI-1043: error during processing CBD-file CAS3.C06 >> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 1043 SG_CODIEREN ERROR! Modul: COAPI.CPP, Proc: coapiGetAbsPathInfo, LineNr: 01, ErrorNr: 1000 COAPI-1000: error ERROR! Modul: CBD_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 40. 003003'01,SONDERTASTE_PANIKALARM (744d, 2E8h) ERROR! Modul: CDH.C, Proc: CDHGetNettoDataFromCbd, LineNr: 01, ErrorNr: 1043 COAPI-1043: error during processing CBD-file CAS3.C06 >> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 1043 SG_CODIEREN
	Appreciate 0 Tweet Quote

11-10-2016, 01:14 AM	#2
Sensible_ Colonel 532 Rep 2,503 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	What items have you coded and what are you trying to code? Can you code CAS back to default with expertmode?
	Appreciate 0 Quote

11-10-2016, 04:57 AM	#3
Sensible_ Colonel 532 Rep 2,503 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	Actually what are you trying to do? Alarm Retrofit? Did you VO code the car with option 302?
	Appreciate 0 Quote

11-11-2016, 09:36 PM	#4
KurtYYC New Member 4 Rep 10 Posts Drives: 2007 328xi Join Date: Jan 2016 Location: Calgary iTrader: (0)	Hi Sensible, I was coding in the OEM alarm that I installed so it was active. I actually figured out my error. SONDERTASTE_PANIKALARM needed to be changed to panikalarm and I had incorrectly changed it to aktiv. Thanks for trying to help!
	Appreciate 0 Quote