70A charger enough for complete coding

rif75 · 12-18-2016, 06:48 PM

Hello Guys

Does a good 70A charger would be enough to do a complete coding of a e90 330i with Ista P or do I need a type MST 80 for example

http://www.wiltec.de/wiltec-chargeur...=wiltec_french

Sensible_ · 12-18-2016, 06:59 PM

70a is recommended. Most go for inc-700a

I use a 50a Ring power supply: http://www.ringautomotive.com/uk/pro...rgePro/RSCPR50

If you are going with a 'charger' make sure it has a Power supply or Battery Support mode.

rif75 · 12-18-2016, 07:34 PM

Ok, I'm going to check what options I have in Europe for max 200.

Your Ring Power 50a seems to be a very good option

There is this one too

http://www.hamradio.co.uk/accessorie...psu-pd-702.php

Scrippy · 12-20-2016, 06:20 PM

OP, I code my car all the time and I use a 10amp trickle charger. I have processed the whole car with my KD-can cable without issue many times. I've also used my icom to update MULF, CIC, Media without incident as well. The key is to turn all unnecessary crap off before you code. All windows down, driver door open, daytime running lights off, dome light off, CIC volume all the way down then off. The updates with icom have taken over an hour so I'm not sure what you are doing that has you worried.

Levanime · 12-20-2016, 09:34 PM

If you will remove pump fuse it will help a lot

rif75 · 12-21-2016, 04:51 AM

Quote:

Originally Posted by Scrippy

OP, I code my car all the time and I use a 10amp trickle charger. I have processed the whole car with my KD-can cable without issue many times. I've also used my icom to update MULF, CIC, Media without incident as well. The key is to turn all unnecessary crap off before you code. All windows down, driver door open, daytime running lights off, dome light off, CIC volume all the way down then off. The updates with icom have taken over an hour so I'm not sure what you are doing that has you worried.

The issue is in case of a complete coding of the car. For example, I did last week the 330xi e90 of my friend, the coding failed after 30 min on the JBE, not sure the problem was because of the power supply since his battery was new and fully loaded but...

Sensible_ · 12-21-2016, 06:04 AM

Quote:

Originally Posted by rif75

Quote:

Originally Posted by Scrippy

OP, I code my car all the time and I use a 10amp trickle charger. I have processed the whole car with my KD-can cable without issue many times. I've also used my icom to update MULF, CIC, Media without incident as well. The key is to turn all unnecessary crap off before you code. All windows down, driver door open, daytime running lights off, dome light off, CIC volume all the way down then off. The updates with icom have taken over an hour so I'm not sure what you are doing that has you worried.

The issue is in case of a complete coding of the car. For example, I did last week the 330xi e90 of my friend, the coding failed after 30 min on the JBE, not sure the problem was because of the power supply since his battery was new and fully loaded but...

30mins with no battery support is 30mins to long in my opinion

12-18-2016, 06:48 PM	#1
rif75 Lieutenant 66 Rep 412 Posts Drives: BMW M4 LCI ZCP and BMW M5 f10 Join Date: Jan 2014 Location: Paris iTrader: (0)	70A charger enough for complete coding Hello Guys Does a good 70A charger would be enough to do a complete coding of a e90 330i with Ista P or do I need a type MST 80 for example http://www.wiltec.de/wiltec-chargeur...=wiltec_french __________________ BMW M5 ZCP and M4 ZCP. BMW 540i G30 stage 2 with KW street confort, Wagner DP, Remus catback, M sport brakes 395mm front and 385mm rear. MHD tune.
	Appreciate 0 Tweet Quote

12-18-2016, 06:59 PM	#2
Sensible_ Colonel 533 Rep 2,503 Posts Drives: 2008 E90 Join Date: Feb 2012 Location: London iTrader: (1)	70a is recommended. Most go for inc-700a I use a 50a Ring power supply: http://www.ringautomotive.com/uk/pro...rgePro/RSCPR50 If you are going with a 'charger' make sure it has a Power supply or Battery Support mode.
	Appreciate 0 Quote

12-18-2016, 07:34 PM	#3
rif75 Lieutenant 66 Rep 412 Posts Drives: BMW M4 LCI ZCP and BMW M5 f10 Join Date: Jan 2014 Location: Paris iTrader: (0)	Ok, I'm going to check what options I have in Europe for max 200. Your Ring Power 50a seems to be a very good option There is this one too http://www.hamradio.co.uk/accessorie...psu-pd-702.php __________________ BMW M5 ZCP and M4 ZCP. BMW 540i G30 stage 2 with KW street confort, Wagner DP, Remus catback, M sport brakes 395mm front and 385mm rear. MHD tune.
	Appreciate 0 Quote

12-20-2016, 06:20 PM	#4
Scrippy Lord Scrip 1920 Rep 3,096 Posts Drives: 2011 M3 Coupe Join Date: Jan 2012 Location: LA,Ca iTrader: (0) Garage List [10.00] 2007 BMW 335i [10.00]	OP, I code my car all the time and I use a 10amp trickle charger. I have processed the whole car with my KD-can cable without issue many times. I've also used my icom to update MULF, CIC, Media without incident as well. The key is to turn all unnecessary crap off before you code. All windows down, driver door open, daytime running lights off, dome light off, CIC volume all the way down then off. The updates with icom have taken over an hour so I'm not sure what you are doing that has you worried. __________________
	Appreciate 0 Quote

12-20-2016, 09:34 PM	#5
Levanime BimECU 193 Rep 760 Posts Drives: BMW Join Date: Dec 2014 Location: SD iTrader: (0) Garage List 2007 BMW 335 [0.00]	If you will remove pump fuse it will help a lot
	Appreciate 0 Quote