[ssshake]

I just checked my car out with INPA. I'm seeing 4 temp settings that are out of range. My car seems to perform fine and there's no error codes that I can see (new to INPA). Can anyone give advice?

This is "Tension Motor Temperature"



This is coolant temperature. I was idling in the driveway but also it's -10C out because it's winter. Is the sensor messed up or is this a real value?



For this one, the 'intake air temperature
' It's all over the place, <0C. >120C. Seems all over the map. When I sit there and watch it for a minute it seems to jump all over the place

[hassmaschine]

Spannung is voltage in this context. Those are raw sensor voltage values - looks like the cylinder head temp sensor has failed or is disconnected.

[ssshake]

thanks. Just googling today I dont see a cylinder head temp sensor. But instructions for an oil temp pressure switch and a coolant temp sensor. Are you referring to those or do you know of the part number perhaps?

[hassmaschine]

Its the engine coolant temp sensor, its in the front of the head near the oil filter housing.

[ssshake]

Do you believe thats the cause for all three of these readings or does that just address the one the sounds most relevant?