LI in the flesh

Bubbles · 04-13-2008, 10:06 PM

...................

beach bimmer · 04-13-2008, 11:36 PM

I have a Lidatek in my 05 Tacoma. Would like to install an LI in my 06 330xi. Where can I purchase an LI unit? Thanks.

T2x · 04-17-2008, 11:23 PM

I got one too, don't forget I think you have to upload the jamming software onto it via serial because I think it comes stock with just the parking sensor due to legal issues.

www.laserinterceptorusa.com is the US distributors site.

beach bimmer · 04-17-2008, 11:55 PM

T2x,
Thanks for the info. Beach Bimmer.

T2x · 04-18-2008, 03:48 AM

Quote:

Originally Posted by beach bimmer

T2x,
Thanks for the info. Beach Bimmer.

np ill probably try to test it out this weekend and give you guys some info on its capabilities.

edit: Been trying unsuccessfully to update the firmware on the control unit. Can't find any options for it other than one that says its coming in the future so maybe our units just claim to have the jamming functionality disabled but really work.

dr.roro · 04-20-2008, 02:46 AM

Post some pictures of the installation. I'm curious to see where the optimal spots are on the E92.

ZTZ1010 · 04-20-2008, 10:34 AM

Quote:

Originally Posted by T2x

edit: Been trying unsuccessfully to update the firmware on the control unit. Can't find any options for it other than one that says its coming in the future so maybe our units just claim to have the jamming functionality disabled but really work.

where did you buy your unit? Ivan said the only units that come standard as MLS ( no jamming) are sold in places where they are illegal. Try the LI Forums.. you can ask support questions or speak directly to ivan

http://85.125.82.130/LaserInterceptor/smf/index.php

T2x · 04-21-2008, 10:35 PM

Yeah its illegal to use in california but i just talked to elvis and he says that it should have all of the software on it.

I currently have it installed on my e90. The jammers are located on both sides and the laser diode is pointing out of the 4th full slot the outsides of both grills. I have the wires going through the drivers side firewall near the abs system. Tapping into the cigarette lighter power. I have the switch coming out in a temporary mounted spot in the crack under the steering wheel. The box itself is currently chilling on the side of the car near the hood release.

The worst parts of the installation are getting the units aligned behind the grill, getting the wires through the firewall(had to cut them and recrimp them after they were through), and tapping into the cigarette power.

I might put some pics up later.

dr.roro · 04-21-2008, 11:43 PM

Are they okay behind the grill? I thought they needed a completely unobstructed view in order to work to full potential.

T2x · 04-23-2008, 02:22 AM

Quote:

Originally Posted by dr.roro

Are they okay behind the grill? I thought they needed a completely unobstructed view in order to work to full potential.

AndrewAz did an install behind the grill I believe so I'm just copying him for now. I dont see a problem with behind the grill as long as the laser receiver and transmitter are given a clear view of the road it should protect you until you are like 30 feet from the gun.

edit: I'll probably have to cut the grill or something to make them unobstructed but I'm also going for a stealth look. Currently I have them mounted so that they are pretty invisible unless you bend over and look for them.

edit2: If you check out this pic: http://www.usautoparts.net/bmw/pics/...275_grille.jpg
then you can see that there is really no place to mount them besides behind the grill or near the foglights. I wish we could mount them vertically in the grill slots. Cutting the grill would look horrible unless you had it blacked out.

dr.roro · 04-23-2008, 10:42 AM

So do you think it's fine, or are you agreeing with me? I agree that cutting the grille wouldn't be the best looking option, although the only other place I see is the lower grille, which I think is a little lower than ideal.

Let us know what you end up doing!

T2x · 04-23-2008, 07:42 PM

Quote:

Originally Posted by dr.roro

So do you think it's fine, or are you agreeing with me? I agree that cutting the grille wouldn't be the best looking option, although the only other place I see is the lower grille, which I think is a little lower than ideal.

Let us know what you end up doing!

I'm sort of agreeing with you because after seeing some videos of the LI it appears as if an infrared ray is coming out of the side opposite the lens so it may well be that the lens is the receiver and the other part is the diode. You would have to make both the diode and the receiver open to the road.

Bubbles · 04-24-2008, 09:48 PM

Quote:

Originally Posted by T2x

I'm sort of agreeing with you because after seeing some videos of the LI it appears as if an infrared ray is coming out of the side opposite the lens so it may well be that the lens is the receiver and the other part is the diode. You would have to make both the diode and the receiver open to the road.

The bubble is the receiver. No need to upgrade firmware yet.

doba_s · 05-29-2008, 02:49 AM

so when you turn it on , do you guys have that beeping sound first for about 30sec and then the message ( something about parking beeing deactivated )

how can yuu check if it works ?

dinkoh · 06-06-2008, 03:04 PM

Can someone post a DIY guide? That would be of tremendous help!

TambourineMan · 06-20-2008, 08:37 PM

You can mount them vertically in the slots in the kidney grill. That is much better for effectiveness than horizontally behind the grill slats.

See here:

http://85.125.82.130/LaserIntercepto...p?topic=451.45

04-13-2008, 10:06 PM	#1
Bubbles Brigadier General 2831 Rep 4,445 Posts Drives: Green Bastard Join Date: Jun 2007 Location: Bishop Bend iTrader: (3)	............. ................... __________________ Last edited by Bubbles; 07-11-2008 at 07:25 PM..
	Appreciate 0 Tweet Quote

04-13-2008, 11:36 PM	#2
beach bimmer New Member 7 Rep 27 Posts Drives: 11-M3 Join Date: Feb 2008 Location: seaview,wa iTrader: (0)	I have a Lidatek in my 05 Tacoma. Would like to install an LI in my 06 330xi. Where can I purchase an LI unit? Thanks.
	Appreciate 0 Quote

04-17-2008, 11:23 PM	#3
T2x Private 8 Rep 86 Posts Drives: e90 335i Join Date: Mar 2007 Location: California iTrader: (0)	I got one too, don't forget I think you have to upload the jamming software onto it via serial because I think it comes stock with just the parking sensor due to legal issues. www.laserinterceptorusa.com is the US distributors site.
	Appreciate 0 Quote

04-17-2008, 11:55 PM	#4
beach bimmer New Member 7 Rep 27 Posts Drives: 11-M3 Join Date: Feb 2008 Location: seaview,wa iTrader: (0)	T2x, Thanks for the info. Beach Bimmer.
	Appreciate 0 Quote

04-20-2008, 02:46 AM	#6
dr.roro Captain 216 Rep 847 Posts Drives: 2025 G05 X5 Join Date: Oct 2007 Location: MD iTrader: (2) Garage List 2025 BMW X5 xDrive40i [0.00]	Post some pictures of the installation. I'm curious to see where the optimal spots are on the E92.
	Appreciate 0 Quote

04-21-2008, 10:35 PM	#8
T2x Private 8 Rep 86 Posts Drives: e90 335i Join Date: Mar 2007 Location: California iTrader: (0)	Yeah its illegal to use in california but i just talked to elvis and he says that it should have all of the software on it. I currently have it installed on my e90. The jammers are located on both sides and the laser diode is pointing out of the 4th full slot the outsides of both grills. I have the wires going through the drivers side firewall near the abs system. Tapping into the cigarette lighter power. I have the switch coming out in a temporary mounted spot in the crack under the steering wheel. The box itself is currently chilling on the side of the car near the hood release. The worst parts of the installation are getting the units aligned behind the grill, getting the wires through the firewall(had to cut them and recrimp them after they were through), and tapping into the cigarette power. I might put some pics up later.
	Appreciate 0 Quote

04-21-2008, 11:43 PM	#9
dr.roro Captain 216 Rep 847 Posts Drives: 2025 G05 X5 Join Date: Oct 2007 Location: MD iTrader: (2) Garage List 2025 BMW X5 xDrive40i [0.00]	Are they okay behind the grill? I thought they needed a completely unobstructed view in order to work to full potential.
	Appreciate 0 Quote

04-23-2008, 10:42 AM	#11
dr.roro Captain 216 Rep 847 Posts Drives: 2025 G05 X5 Join Date: Oct 2007 Location: MD iTrader: (2) Garage List 2025 BMW X5 xDrive40i [0.00]	So do you think it's fine, or are you agreeing with me? I agree that cutting the grille wouldn't be the best looking option, although the only other place I see is the lower grille, which I think is a little lower than ideal. Let us know what you end up doing!
	Appreciate 0 Quote

05-29-2008, 02:49 AM	#14
doba_s Major General 429 Rep 6,100 Posts Drives: X7 l Cayenne l 997.2RS Join Date: Sep 2006 Location: Danville iTrader: (26)	so when you turn it on , do you guys have that beeping sound first for about 30sec and then the message ( something about parking beeing deactivated ) how can yuu check if it works ?
	Appreciate 0 Quote

06-06-2008, 03:04 PM	#15
dinkoh Captain 22 Rep 877 Posts Drives: 07 e90 lemon/black Join Date: Feb 2007 Location: charm city --> bay area iTrader: (4)	Can someone post a DIY guide? That would be of tremendous help!
	Appreciate 0 Quote

06-20-2008, 08:37 PM	#16
TambourineMan Second Lieutenant 5 Rep 221 Posts Drives: 335xi coupe Join Date: Jul 2007 Location: Born in ME, In exile in MA iTrader: (0)	You can mount them vertically in the slots in the kidney grill. That is much better for effectiveness than horizontally behind the grill slats. See here: http://85.125.82.130/LaserIntercepto...p?topic=451.45
	Appreciate 0 Quote