[jazz5000]

Hi

Trying to help a friend out.

He has done the facelift conversion on a e92 with frm2

Has the usual problem where the angel eyes are flickering,

Have tried adding $5AK to vo on cas and nfrm , no luck

Tried to change the date to #0310 but when coding it to nfrm would give a error.

Have also tried uping the voltage going to the rings to werte01 .

Anything else we can try before going to the frm3 route

[Dtype]

Need to re-wire AE.

[Joe@TopGearSolutions]

Originally Posted by jazz5000

Hi

Trying to help a friend out.

He has done the facelift conversion on a e92 with frm2

Has the usual problem where the angel eyes are flickering,

Have tried adding $5AK to vo on cas and nfrm , no luck

Tried to change the date to #0310 but when coding it to nfrm would give a error.

Have also tried uping the voltage going to the rings to werte01 .

Anything else we can try before going to the frm3 route

Did you make sure the bulb checks are turned off?

[jazz5000]

Originally Posted by Joe@TopGearSolutions

Did you make sure the bulb checks are turned off?

Hi

yes turned off all cold,warm and check control in the frm

[jazz5000]

Originally Posted by Dtype

Need to re-wire AE.

Any more info?

[jazz5000]

Originally Posted by BimmerGeeks

Are the LCI headlights OEM, more importantly, are the angel eyes OEM? Can you post the .trc file(please don't just paste it in the body of your reply), upload a link to the file.

Yes OEM LCI headlights and angels

Have attached the trc

Thanks

[jazz5000]

Have changed those back to werte_04 in that file

I changed all these to werte_01

PWM_RL_BL_1_FKT_BL
PWM_RL_BL_1_FKT_SL
PWM_RL_BL_1_FKT_PARKL

Which didnt sort the flickering issue

[jazz5000]

Originally Posted by BimmerGeeks

Changing the pwm_sl_v parameters to werte02 or werte03 didn't help?

Will try and get back to you

Thanks

[jazz5000]

Have put in a frm3 module now but seems to have it's own set of issues

http://www.e90post.com/forums/showth...9#post21424029