I modded my JBD!!!!!!

335stoner · 04-08-2017, 09:09 PM

Well I have been trying to fine tune my JBD for no ese... I have had a few problems after leaving a few stores. The stops were 5 or 10min after a good drive hit the throttle a good amount and got popped....

I simply "guestimated" where the pot was and drilled a hole... Then as safe measures heated the hole with a lighter took a plastic screw and threaded it into the hole to keep some weather resistance...

It might seem stupid to some but it made me happy.. lol

Mrdeezy · 04-08-2017, 09:11 PM

��

32valves · 04-09-2017, 07:22 AM

I missed mine years ago by drilling a 1/4 hole and using a 1/4 plug from Lowes or home depot.
As for the other stuff you said I have no clue?

335stoner · 04-09-2017, 01:02 PM

I had mine up at 100% and got the "low rail pressure" ses with reduced engine power.. I have been backing it down ever so slightly.

32valves · 04-09-2017, 09:18 PM

Quote:

Originally Posted by 335stoner

I had mine up at 100% and got the "low rail pressure" ses with reduced engine power.. I have been backing it down ever so slightly.

yeah mine would only take 75%, every car reacts different to 100%

04-08-2017, 09:09 PM	#1
335stoner BRR tuned 224 Rep 646 Posts Drives: 335D black Join Date: Nov 2016 Location: cypress tx iTrader: (0)	I modded my JBD!!!!!! Well I have been trying to fine tune my JBD for no ese... I have had a few problems after leaving a few stores. The stops were 5 or 10min after a good drive hit the throttle a good amount and got popped.... I simply "guestimated" where the pot was and drilled a hole... Then as safe measures heated the hole with a lighter took a plastic screw and threaded it into the hole to keep some weather resistance... It might seem stupid to some but it made me happy.. lol Attached Images
	Appreciate 0 Tweet Quote

04-08-2017, 09:11 PM	#2
Mrdeezy Second Lieutenant 56 Rep 216 Posts Drives: 335d m-sport Join Date: Aug 2015 Location: San diego iTrader: (0)	��
	Appreciate 0 Quote

04-09-2017, 07:22 AM	#3
32valves Captain 114 Rep 934 Posts Drives: 2011 335d sport Join Date: Mar 2014 Location: DC area iTrader: (0)	jbd I missed mine years ago by drilling a 1/4 hole and using a 1/4 plug from Lowes or home depot. As for the other stuff you said I have no clue?
	Appreciate 0 Quote

04-09-2017, 01:02 PM	#4
335stoner BRR tuned 224 Rep 646 Posts Drives: 335D black Join Date: Nov 2016 Location: cypress tx iTrader: (0)	I had mine up at 100% and got the "low rail pressure" ses with reduced engine power.. I have been backing it down ever so slightly.
	Appreciate 0 Quote