[pettman]

Have installed all my kit, went to update the VO, everything reads fine, changed all the values and went to write and get the following error log:


ERROR! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
IFH-0006: COMMAND NOT ACCEPTED

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_E65CAS

>> ERROR! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
IFH-0006: COMMAND NOT ACCEPTED

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
FA_WRITE

>> ERROR! Modul: COAPI4.CPP, Proc: coapiWriteAuftrag, LineNr: 06, ErrorNr: 2000
FA_WRITE: A_E65CAS

ERROR! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
IFH-0006: COMMAND NOT ACCEPTED

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_E65CAS

>> ERROR! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
IFH-0006: COMMAND NOT ACCEPTED

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
FA_WRITE

>> ERROR! Modul: COAPI4.CPP, Proc: coapiWriteAuftrag, LineNr: 06, ErrorNr: 2000
FA_WRITE: A_E65CAS

ERROR! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
IFH-0006: COMMAND NOT ACCEPTED

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
CODIERINDEX_LESEN

>> ERROR! Modul: COAPI.CPP, Proc: coapiReadCodierIndexFromSg, LineNr: 05, ErrorNr: 2000
CODIERINDEX_LESEN: A_E65CAS

>> ERROR! Modul: LFCDHDIA.CPP (A_E65CAS.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
IFH-0006: COMMAND NOT ACCEPTED

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 2000
FA_WRITE

>> ERROR! Modul: COAPI4.CPP, Proc: coapiWriteAuftrag, LineNr: 06, ErrorNr: 2000
FA_WRITE: A_E65CAS

Can anyone help me ?

[pettman]

Originally Posted by BimmerGeeks

You've got a few different things going on. Re-import your datens & make sure your changes to your files are correct.

Did that. Still didn't work. Can you help me get this working?

[Sensible_]

What are you using to import your datens?

If it's not BMW Coding Tool then use BMW Coding Tool.

If you are using BMW Coding Tool then download some new datens.

[pettman]

Originally Posted by Sensible_

What are you using to import your datens?

If it's not BMW Coding Tool then use BMW Coding Tool.

If you are using BMW Coding Tool then download some new datens.

Fixed it, not entirely sure how but I downloaded another ncs version, and re imported the datens then went back to the old version and it worked fine.

My next problem is I had a TCU with bluetooth, but the new combox I have the connectors for this i cant get both in due to the plugs. how to make that fit?

Also, i have added the vo codes to cas and nfrm but I cant seem to get bluetooth working. Any ideas?

[Sensible_]

You have to take a sharpe blade of some sort and slice off the small plastic fun on the Bluetooth antenna connector on the combox I think it's bottom left. Look at your old TCU, I guess it only has 2 of these fins.

What exactly have you coded. Be specific.

[pettman]

Originally Posted by Sensible_

You have to take a sharpe blade of some sort and slice off the small plastic fun on the Bluetooth antenna connector on the combox I think it's bottom left. Look at your old TCU, I guess it only has 2 of these fins.

What exactly have you coded. Be specific.

I would have to cut more than just that to get the connector to get on.

I did the following VO coding on CAS and NFRM:

change build date to #0311
removed $612 $616 $633 and $639
added $614, $615, $644, $6AL, $6VC, $6FL, $6NF, $6NR, $7SP

But think I need to write to MEDIA too? But I am new to this so any guidance would be good.

[Sensible_]

In which case you'll need to build an adapter. Probably you can buy one. I've seen them advertised.

Have you coded your CIC to your default VO now that you've updated your VO? You need to let the CIC know you've installed a combox by coding it to default.

[pettman]

Yes I followed this video

At the end he shows you to write to CIC with the changes.

The only cable i cant connect is the violet one that is GSM cellular phone, doesnt sound like this is anything to do with bluetooth though?

[Sensible_]

Did you code MEDIA to default as well, in the same way?

[pettman]

Originally Posted by Sensible_

Did you code MEDIA to default as well, in the same way?

No. Do I need to do that one?

[Sensible_]

Originally Posted by pettman

No. Do I need to do that one?

Yes, you do.

[pettman]

Originally Posted by Sensible_

Yes, you do.

Are there any others or is it just CAS, NFRM and MEDIA?

[Sensible_]

Originally Posted by pettman

Are there any others or is it just CAS, NFRM and MEDIA?

I think you'll still a little confused.

The CAS and FRM stuff is to do with your VO (Vehicle Order also known as FA (German))

Your car has a list of options which makes up its 'DNA' if you will. This is your VO.

When you retrofit anything you should update the VO to reflect the changes. The VO is stored in CAS and FRM (or NFRM depending on version).

Once this is done, any module which relies on the new change of VO should be coded to the new VO default. This is done with an expert mode profile in NCSEXPERT and the job 'SG_CODERIEN' on an module you wish to revert to default.

In your case it would be:

- CIC
- MEDIA

[pettman]

Thanks

I tried writing to MEDIA and get bip-0009 best version error, how does one fix that?

i am using BMW tools 2.12
EDIABAS 6.4.3 Package: 1.3

[Sensible_]

Post a screenshot of the error?

Sounds like more Daten problems to be honest...

[pettman]

Originally Posted by Sensible_

Post a screenshot of the error?

Sounds like more Daten problems to be honest...

I'll grab the error log in a sec if that's ok?

My datens are version 60

[pettman]

Here is the screen shot you requested:



All help is very much appreciated, would like to get everything working

[Sensible_]

Originally Posted by pettman

Here is the screen shot you requested: (just editing)



All help is very much appreciated, would like to get everything working

Did you using BMW Coding Tool to import your datens?

[pettman]

Originally Posted by Sensible_

Did you using BMW Coding Tool to import your datens?

Yes I did

[pettman]

Originally Posted by BimmerGeeks

Make sure your combox is communicating in Inpa.

BimmerGeeks, are you free now at all for a remote session? My cable works as I have managed to code the VO to CAS and NFRM but cant do MEDIA and have the SOS error going off which I want gone. PM me

[pettman]

Originally Posted by BimmerGeeks

Sure

Replied.