[mad1stgen]

BIMMERPOST / Classifieds

Asking Price:

USD 550.00

Location:

✓ Will Ship

Item Interest

Complete 13 Speaker Harman Kardon /L7 speaker set and HK amplifier.

SOLD

[mad1stgen]

TTT

[seanm135]

modifications needed for an e90?

[mad1stgen]

Originally Posted by seanm135

modifications needed for an e90?

Some wiring changes, front tweeters swapped into e90 housings, etc ... nothing crazy.

[Dylanize]

Any chance you'd be willing to sell me just the amp?

[mad1stgen]

TTT

[Frack]

very tempting, keep me posted on price drops

[guop]

wouldn't you need a logic7 head unit as well for it to work? or will coding be enough

[mad1stgen]

Originally Posted by Frack

very tempting, keep me posted on price drops

Wouldn't count on it too much

Originally Posted by guop

wouldn't you need a logic7 head unit as well for it to work? or will coding be enough

Simple 1 parameter coding takes care of that.

[dleccord]

Originally Posted by mad1stgen

Wouldn't count on it too much



Simple 1 parameter coding takes care of that.

Who will supply the programming? I have the E90 base system. Is this plug and play?

[david in germany]

Originally Posted by dleccord

Who will supply the programming? I have the E90 base system. Is this plug and play?

You need either CIC or verify your deck (professional) has optic output (most) If it does have optic out but is not connected you will need to add the most lines and a fiber optic distro. If you have Bluetooth you will generally have most and the distro in place. If you have the distro, add the additional lines and code the car.

For coding, there are a lot of people that can code it for you.

Forgot to mention, you will need either the mounts for the rear doors and cut the doors and the additional harnesses or logic 7 rear door panels and the door harnesses too.

[mad1stgen]

Originally Posted by dleccord

Who will supply the programming? I have the E90 base system. Is this plug and play?

If you were local then sure, otherwise, I suggest finding a local coder.

Originally Posted by david in germany

You need either CIC or verify your deck (professional) has optic output (most) If it does have optic out but is not connected you will need to add the most lines and a fiber optic distro. If you have Bluetooth you will generally have most and the distro in place. If you have the distro, add the additional lines and code the car.

For coding, there are a lot of people that can code it for you.

Forgot to mention, you will need either the mounts for the rear doors and cut the doors and the additional harnesses or logic 7 rear door panels and the door harnesses too.

All that applies to the absolute base radio system which is rather rare in US.

If the car is equipped with 676 Professional or CIC radio, then it's very simple. The rear door wiring doesn't differ if there are speakers in doors already.
The tweeters mount in pre stamped holes with the locking rings, and feed off the woofers, via freq crossovers.

[david in germany]

Originally Posted by mad1stgen

If the car is equipped with 676 Professional or CIC radio, then it's very simple. The rear door wiring doesn't differ if there are speakers in doors already.
The tweeters mount in pre stamped holes with the locking rings, and feed off the woofers, via freq crossovers.

That is the problem, if they are using these as an upgrade from hifi then they won't be wired, stamped or have the brackets in the doors.

I am about to do the same retrofit in my wife's 328i.

[kingcloudix]

Interested in the subs! Let me know asap.

I have base unit with alpine retro fit kit but i think they are still plug n play.

[talktomongie]

Hi there, is this still for sale? If so, would you ship them all overseas at my expense?

[mad1stgen]

Originally Posted by talktomongie

Hi there, is this still for sale? If so, would you ship them all overseas at my expense?

Yes, The kit is available. Shipping anywhere in the world is not an issue. PM sent.