|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
JB4 G5 ISO and BMS Meth Kit
|
|
06-21-2017, 07:37 PM | #1 |
Second Lieutenant
39
Rep 236
Posts |
JB4 G5 ISO and BMS Meth Kit
Update- EVERYTHING SOLD Selling my JB4 with 2 step/NLS and data cable along with my BMS meth kit as a package that I had on my n54 335i. (will consider selling separately for the right offer) The meth kit includes the 2.3 gallon tank and dual cm7 nozzles. It also has a custom check-valve built into the cap and an o-ring so it seals. Methanol fumes can be dangerous so this setup only lets air in and not out to prevent any fumes from getting into the trunk (unlike how the CM tank comes from the factory, which just vents both ways through the cap). The kit will also come with everything included in the BMS meth kit (solenoid, fsb, etc) plus some miscellaneous fittings and extra hose. This includes a 90 degree nozzle holder which works better for those running the bms/cpe style chargepipe. The extra hose is high quality aem which is black and looks better in the engine bay IMO, and lower quality clear hose which I use for purging the system, plus the CM hose that bms sells the kit with. The JB4 G5 ISO was just updated with the latest firmware (32.8 which has the flexfuel virtual ethanol software) and has the 2step and no lift shift module wired in. It also comes with the data cable for logging and fsb already installed. I made 486whp 588wtq with this setup. I prefer to sell this as a kit because the fsb and 2 step are already installed on the Jb4. Buyer pays shipping. $800 for everything. Last edited by GODDSPD; 07-05-2017 at 02:13 PM.. |
Bookmarks |
|
|