Anyone running Dinan Camber Plates on KWv3

Venger · 08-08-2017, 04:31 PM

Anyone running Dinan camber plates on an e92 with KW coilovers and any issues with fit or noise? I have a buddy getting rid of his plates and was going to throw it my way but I wanted to know if there are any xi cars with this setup and their experience with it.

I am looking at other adjustable camber plates but these were thrown my way for free.

Also, my car has 3-4 HPDE events a year and is a DD.

miker2013 · 08-08-2017, 10:45 PM

i am about to put a set of dinan camber plates on my 335xi and am interested in feedback as well... it will increase negative camber -.7 on each side which can only be good for our understeer

one thing i was wondering about was the ride height before and after the plates

i know that stock there is a support plate between the strut and the frame that measures 3/8" that i think you remove when installing the camber plate which has its own plate which is like 1/4"

i am installing koni yellows and was wondering if the ride height will be the same with the plates, i would hate for the ride to be any higher in front lol

08-08-2017, 04:31 PM	#1
Venger Enlisted Member 7 Rep 33 Posts Drives: 2011 335xi Msport Join Date: Feb 2016 Location: SoCal -Orange County iTrader: (0) Garage List 2011 335xi [0.00]	Anyone running Dinan Camber Plates on KWv3 Anyone running Dinan camber plates on an e92 with KW coilovers and any issues with fit or noise? I have a buddy getting rid of his plates and was going to throw it my way but I wanted to know if there are any xi cars with this setup and their experience with it. I am looking at other adjustable camber plates but these were thrown my way for free. Also, my car has 3-4 HPDE events a year and is a DD. __________________ 2011 N55 E92 335xi \|Pure Stage 2 \|GFB Diverter \|Pure Inlet\|MHD\|Fuel-It S2 LPFP\|VRSF DP\|VRSF CP\| VRSF 7.5 Race IC\|Cobb Exhaust\|BMS CAI\|BMS OCC \|ER Oil Cooler\|XHP S3 \|Xdelete \|KW V3 Coilovers \|UUC Front Sway Bar\|UUC Front Endlinks\|M3 Rear Sway Bar\|Hotchkis Rear Endlinks\|Vorschlag Camber Plates \|18" Apex Arc 8 RE71R 255/35R18 square \|Wavetrac LSD
	Appreciate 0 Tweet Quote

08-08-2017, 10:45 PM	#2
miker2013 Lieutenant 67 Rep 515 Posts Drives: 335xi 6mt Msport coupe Join Date: Jul 2013 Location: monkeytown iTrader: (0)	i am about to put a set of dinan camber plates on my 335xi and am interested in feedback as well... it will increase negative camber -.7 on each side which can only be good for our understeer one thing i was wondering about was the ride height before and after the plates i know that stock there is a support plate between the strut and the frame that measures 3/8" that i think you remove when installing the camber plate which has its own plate which is like 1/4" i am installing koni yellows and was wondering if the ride height will be the same with the plates, i would hate for the ride to be any higher in front lol
	Appreciate 0 Quote