NEW! VRSF E Chassis N55 Outlet Pipe!

Tiago@VRSF · 10-02-2017, 07:53 PM

This pipe replaces your plastic OEM pipe that's prone to breaking/leaking with an indestructible heavy duty aluminum alternative

This will fit any turbo/intercooler combination and will fit the 135i/335i/X1 E84/E82/E88/E90/E92.

Now available for purchase!

http://www.vr-speed.com/catalogsearc.../?cat=0&q=vrsf

xxMike61 · 10-02-2017, 08:57 PM

This goes on the passenger side?

Kevin39 · 10-02-2017, 09:29 PM

Yes. Between the turbo and intercooler

Jeff@TopGearSolutions · 10-02-2017, 10:06 PM

Turbo to intercooler pipe. Was common in the F3X platform and the idea was brought over after popular demand.

Tiago@VRSF · 10-02-2017, 10:08 PM

That's correct, passenger side. We've been getting a lot of e-mails from customers claiming they're having to replace their turbo outlet pipe due to the OEM plastic pipe failing so we came up with a solution

Turbod · 10-02-2017, 11:02 PM

Can you take a couple photos of the inside of the pipe? I am pretty sure the stock size was 2.5 inches but I see in your listing you say it is 3 inches. So this pipe is in fact bigger than the stock unit? Last question, you say it fits the 2011 - 2012 X1, I am unaware of any changes from 2012 - 2015. Does it not fit the later E84 years or is it just not confirmed therefore you don't have it listed?

Tiago@VRSF · 10-02-2017, 11:32 PM

The 3" is a misprint, I'll have it corrected now. Stock is 2.5" OD, not ID. The ID is closer to 2.2". The OEM pipe necks down in a few different places whereas this remains 2.5" throughout

Welcome to NBA Jam · 10-03-2017, 08:58 AM

VRSF does it again!

JETmn · 10-03-2017, 09:16 AM

Went to order and dang that is a spendy little pipe! Ordered it anyway :P

Tiago@VRSF · 10-03-2017, 09:17 AM

It's about half the price of a new OEM unit and currently the least expensive option

1nityrider · 10-03-2017, 11:14 AM

I plan to upgrade my N55 turbo and some vendors offer an additional cost for an inlet, is this kinda the same inlet they are selling?

Tiago@VRSF · 10-03-2017, 11:18 AM

This is not the same as the inlet, this is the outlet

1nityrider · 10-03-2017, 11:39 AM

Quote:

Originally Posted by Tiago@VRSF

This is not the same as the inlet, this is the outlet

I am trying to put together a parts list for a future turbo upgrade. Sorry I am noob to the car but not noob to tuning, but where on the car is this outlet at?

Jeff@TopGearSolutions · 10-03-2017, 12:10 PM

Quote:

Originally Posted by 1nityrider

I am trying to put together a parts list for a future turbo upgrade. Sorry I am noob to the car but not noob to tuning, but where on the car is this outlet at?

The outlet is from the turbo to the intercooler.

The inlet is the duct to the actual turbo.

Kevin39 · 10-03-2017, 12:10 PM

Quote:

Originally Posted by 1nityrider

where on the car is this outlet at?

Passenger side. It connects the turbo to the intercooler.

The inlet pipe connects your intake to the turbo.

Edit: beat me to it.

BKBMW335I · 10-03-2017, 12:17 PM

VRSF to the rescue again!!

1nityrider · 10-03-2017, 12:44 PM

Quote:

Originally Posted by Jeff@TopGearSolutions

The outlet is from the turbo to the intercooler.

The inlet is the duct to the actual turbo.

Great thanks, so something to buy when buying an intercooler.

Ste133 · 10-03-2017, 05:11 PM

This may be another daft question - same fitment for RHD and LHD?

I'm in the UK and I will be installing my upgraded turbo in the coming weeks.

Cheers,
Steve

Jeff@TopGearSolutions · 10-03-2017, 05:14 PM

Quote:

Originally Posted by 1nityrider

Great thanks, so something to buy when buying an intercooler.

That would be an opportune time.

OP3NAIR · 10-03-2017, 05:41 PM

What’s the install process for this? From the top or below/front? Can it be pulled out without removing the water pump?

Tiago@VRSF · 10-03-2017, 08:12 PM

This will fit both RHD and LHD. You can install from the bottom without removing the water pump.

Mistajay · 10-04-2017, 11:45 AM

That's was funny, yesterday i was working on my car and i check behing the car and i said i pay 1000 for my intercooler, i buy the inlet from Pureturbo but nobody does the outlet.

I will buy it shorty thanks!

10-02-2017, 07:53 PM	#1
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	NEW! VRSF E Chassis N55 Outlet Pipe! This pipe replaces your plastic OEM pipe that's prone to breaking/leaking with an indestructible heavy duty aluminum alternative This will fit any turbo/intercooler combination and will fit the 135i/335i/X1 E84/E82/E88/E90/E92. Now available for purchase! http://www.vr-speed.com/catalogsearc.../?cat=0&q=vrsf
	Appreciate 2 OTN5540.50 BKBMW335I160.00 Tweet Quote

10-02-2017, 08:57 PM	#2
xxMike61 First Lieutenant 79 Rep 239 Posts Drives: 2011 335i Coupe Join Date: Feb 2017 Location: Sacramento, CA iTrader: (0)	This goes on the passenger side? __________________ 2011 335i M-Sport E92 MHD E30 \| Phoenix Racing CP \| K&N Drop In Air Filter \|Fuel-it Stage 2 LPFP \| xHP Stage 3 \| VRSF DP \| ARM 5" FMIC + Hose Upgrades \| GFB DV+ \| VMR 19" v703
	Appreciate 0 Quote

10-02-2017, 09:29 PM	#3
Kevin39 Lieutenant 164 Rep 411 Posts Drives: 2011 E90 N55 Join Date: Feb 2016 Location: Indiana iTrader: (0)	Yes. Between the turbo and intercooler
	Appreciate 0 Quote

10-02-2017, 10:06 PM	#4
Jeff@TopGearSolutions 3467 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	Turbo to intercooler pipe. Was common in the F3X platform and the idea was brought over after popular demand.
	Appreciate 0 Quote

10-02-2017, 10:08 PM	#5
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	That's correct, passenger side. We've been getting a lot of e-mails from customers claiming they're having to replace their turbo outlet pipe due to the OEM plastic pipe failing so we came up with a solution
	Appreciate 1 BKBMW335I160.00 Quote

10-02-2017, 11:02 PM	#6
Turbod Major 400 Rep 1,210 Posts Drives: 2014 E84 X1 35i M Sport Join Date: Mar 2015 Location: Oregon iTrader: (0)	Can you take a couple photos of the inside of the pipe? I am pretty sure the stock size was 2.5 inches but I see in your listing you say it is 3 inches. So this pipe is in fact bigger than the stock unit? Last question, you say it fits the 2011 - 2012 X1, I am unaware of any changes from 2012 - 2015. Does it not fit the later E84 years or is it just not confirmed therefore you don't have it listed? __________________ 2011 E92 335i \| 11.7@125 SOLD 2017 Camaro SS \| 12.7@114 SOLD 2019 Audi TT RS \| 10.5@130 SOLD 2020 F97 X3M \| 11.0@123 2023 G80 M3 xDrive
	Appreciate 0 Quote

10-02-2017, 11:32 PM	#7
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	The 3" is a misprint, I'll have it corrected now. Stock is 2.5" OD, not ID. The ID is closer to 2.2". The OEM pipe necks down in a few different places whereas this remains 2.5" throughout
	Appreciate 2 Turbod399.50 BKBMW335I160.00 Quote

10-03-2017, 08:58 AM	#8
Welcome to NBA Jam Is it the shoes!? 3893 Rep 5,111 Posts Drives: (Sold) 2011 E92 335i ZMP 6MT Join Date: Mar 2014 Location: USA iTrader: (1)	VRSF does it again!
	Appreciate 0 Quote

10-03-2017, 09:16 AM	#9
JETmn Lieutenant Colonel 247 Rep 1,595 Posts Drives: 2011 335i xDrive Msport Join Date: Apr 2013 Location: Orlando iTrader: (0) Garage List 2011 335Xi [0.00]	Went to order and dang that is a spendy little pipe! Ordered it anyway :P __________________ 2011 335Xi 6AT - VRSF catless DP - VRSF 7" FMIC with turbo inlet pipe - VRSF chargepipe - Pure Stage 1 turbo - JB4 - E30 - xHP Stage 3 - Strongflex tension bushings - Whiteline RSFB - UUC rear swaybar
	Appreciate 0 Quote

10-03-2017, 09:17 AM	#10
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	It's about half the price of a new OEM unit and currently the least expensive option
	Appreciate 0 Quote

10-03-2017, 11:14 AM	#11
1nityrider Second Lieutenant 62 Rep 291 Posts Drives: 2023 X4MC Join Date: Nov 2012 Location: St Paul iTrader: (0)	I plan to upgrade my N55 turbo and some vendors offer an additional cost for an inlet, is this kinda the same inlet they are selling?
	Appreciate 0 Quote

10-03-2017, 11:18 AM	#12
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	This is not the same as the inlet, this is the outlet
	Appreciate 0 Quote

10-03-2017, 12:17 PM	#16
BKBMW335I Captain 160 Rep 772 Posts Drives: '11 E93 335I Join Date: Aug 2015 Location: Land of OZ, Kansas iTrader: (0)	VRSF to the rescue again!!
	Appreciate 0 Quote

10-03-2017, 05:11 PM	#18
Ste133 Lieutenant 22 Rep 591 Posts Drives: 335i Join Date: Sep 2011 Location: SW London iTrader: (5)	This may be another daft question - same fitment for RHD and LHD? I'm in the UK and I will be installing my upgraded turbo in the coming weeks. Cheers, Steve
	Appreciate 1 OTN5540.50 Quote

10-03-2017, 05:41 PM	#20
OP3NAIR Second Lieutenant 69 Rep 210 Posts Drives: '11 335i e93, '03 325xiT Join Date: Jan 2015 Location: NoVA iTrader: (0)	What’s the install process for this? From the top or below/front? Can it be pulled out without removing the water pump?
	Appreciate 0 Quote

10-03-2017, 08:12 PM	#21
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	This will fit both RHD and LHD. You can install from the bottom without removing the water pump.
	Appreciate 0 Quote

10-04-2017, 11:45 AM	#22
Mistajay Private 29 Rep 51 Posts Drives: 335i Join Date: Oct 2016 Location: Saint Sauveur iTrader: (0)	That's was funny, yesterday i was working on my car and i check behing the car and i said i pay 1000 for my intercooler, i buy the inlet from Pureturbo but nobody does the outlet. I will buy it shorty thanks!
	Appreciate 1 OTN5540.50 Quote