[p.s.]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

SOLD
[/IMG]


uploading a image

[justrokkit]

Is this 1 port or 2?
I'm in LI and can go to meet you.

[p.s.]

Originally Posted by justrokkit

Is this 1 port or 2?
I'm in LI and can go to meet you.

I'm up in Utica, like 5 and a half hours from long island. Its a 3 stage, it has 2 additional holes for the actuators. The third hole is not pictured but its below the top most hole. Let me know your zip and i can get a close estimate to shipping if your still interested.

[justrokkit]

Sorry, I meant for the air hose, is there one port for the air return line or are there two? They're located on the "tube" that goes below the throttle mounting position. My zip is 11576

[p.s.]

Originally Posted by justrokkit

Sorry, I meant for the air hose, is there one port for the air return line or are there two? They're located on the "tube" that goes below the throttle mounting position. My zip is 11576

yes its double sided, I actually had the one pictured below but I literally just cracked the left side of it taking it off, its super brittle I guess if someone really wanted they could plug it and just run it. Shipping via usps is 20 to your zip as it weighs about 14 pounds. I do have slight wiggle in my price too.


upload photos to internet

[p.s.]

Just to clarify what I as saying in the last post, yes its a double you would need a double ended breather tube to run it, i wouldn't recommend plugging anything being you can buy one for $20. My 2007 n52 came a double ended connected to my manifold so i never needed a replacement to do a swap to a 528i manifold because I was lucky enough that the breather didn't shatter. Some 3 stage manifolds are single ended but I'm not sure exactly which or what the benefit is.

Heres a link to the breather tube i believe would be the correct one:

https://www.ebay.com/itm/Brand-New-3...ZZXiAh&vxp=mtr

[justrokkit]

PM sent