Chinese front lip spoilers?

Twoforty · 11-20-2017, 01:17 AM

Anyone have any experience with these EBay spoilers?

https://m.ebay.com.au/itm/AK-Style-C...-/142399777036

https://m.ebay.com.au/itm/Carbon-Fib...-/252529252445

naenae · 11-20-2017, 02:54 AM

for that price buy it from mars or euro division. at least you have a place to go back to should it not fit properly.

aaron_ · 11-20-2017, 04:48 AM

I'm interested as well

Mars and ED didn't have any for a facelift when I checked

EB89 · 11-20-2017, 06:11 AM

I’m also interested. I’ve been looking at these a lot recently,

https://rover.ebay.com/rover/0/0/0?m...2F191736168394

https://rover.ebay.com/rover/0/0/0?m...2F161899276935

https://rover.ebay.com/rover/0/0/0?m...2F222586500453

Aus335iguy · 11-20-2017, 01:18 PM

Im interested as well but im pre LCI. I dont mind the HM style one but the side bits dont suit the car.. Have you guys checked out FLOW designs ? $375 for the one they have but id prefer a single line along the front and they offered to do a custom job for an extra $75
https://www.flowdesignsaustralia.com...front-splitter

Aus335iguy · 11-20-2017, 01:21 PM

Or you could get some brackets from HARD and make your own out of a sheet of poly(hard has a splitter but its for a wide body kit)
http://www.hardmotorsport.com/hard-m...pport-bracket/

EB89 · 11-20-2017, 07:13 PM

Quote:

Originally Posted by Aus335iguy

Im interested as well but im pre LCI. I dont mind the HM style one but the side bits dont suit the car.. Have you guys checked out FLOW designs ? $375 for the one they have but id prefer a single line along the front and they offered to do a custom job for an extra $75
https://www.flowdesignsaustralia.com...front-splitter

I asked flow designs and they couldn’t give me an answer about LCI mSport

Aus335iguy · 11-20-2017, 07:17 PM

Quote:

Originally Posted by EB89

Quote:

Originally Posted by Aus335iguy

Im interested as well but im pre LCI. I dont mind the HM style one but the side bits dont suit the car.. Have you guys checked out FLOW designs ? $375 for the one they have but id prefer a single line along the front and they offered to do a custom job for an extra $75
https://www.flowdesignsaustralia.com...front-splitter

I asked flow designs and they couldn’t give me an answer about LCI mSport

I'd say they're the same it's a flat piece

aaron_ · 11-21-2017, 12:57 AM

Quote:

Originally Posted by EB89

I’m also interested. I’ve been looking at these a lot recently,

https://rover.ebay.com/rover/0/0/0?m...2F191736168394

https://rover.ebay.com/rover/0/0/0?m...2F161899276935

https://rover.ebay.com/rover/0/0/0?m...2F222586500453

Buy it and be the guinea pig :-)

EB89 · 11-21-2017, 01:10 AM

Quote:

Originally Posted by aaron_

Buy it and be the guinea pig :-)

I will soon

Socket · 11-21-2017, 05:50 AM

Quote:

Originally Posted by EB89

I’m also interested. I’ve been looking at these a lot recently,

https://rover.ebay.com/rover/0/0/0?m...2F191736168394

https://rover.ebay.com/rover/0/0/0?m...2F161899276935

https://rover.ebay.com/rover/0/0/0?m...2F222586500453

None of these are for the m3 rep bar mate.. what gives???

EB89 · 11-21-2017, 05:13 PM

Quote:

Originally Posted by Socket

None of these are for the m3 rep bar mate.. what gives???

I don’t have an M3 rep bar

I have the 1M, but I’m looking to go back to the M Sport with a lip

JB4-335 · 11-21-2017, 05:57 PM

I have this flow design lip for sale. It's brand new never fitted. Comes with all the hardware. Had it done to my specs for an E9X. Sticks out an extra 20mm.

EB89 · 11-21-2017, 08:21 PM

Quote:

Originally Posted by JB4-335

I have this flow design lip for sale. It's brand new never fitted. Comes with all the hardware. Had it done to my specs for an E9X. Sticks out an extra 20mm.

Would this only fit the M3 replica bar thought?

EB89 · 11-21-2017, 08:23 PM

Would be good to see a comparison, I do like this lip with the M Sport bar

JB4-335 · 11-21-2017, 08:25 PM

Quote:

Originally Posted by EB89

Would this only fit the M3 replica bar thought?

No. It'll fit any E9X front bar.

Aus335iguy · 11-22-2017, 12:52 AM

Quote:

Originally Posted by JB4-335

Quote:

Originally Posted by EB89

Would this only fit the M3 replica bar thought?

No. It'll fit any E9X front bar.

I thought this was sold. If EB doesn't take it I will depending on price

EB89 · 11-22-2017, 01:26 AM

Quote:

Originally Posted by Aus335iguy

I thought this was sold. If EB doesn't take it I will depending on price

Nar I’m good, I like the eBay ones better

Aus335iguy · 11-23-2017, 09:31 AM

Quote:

Originally Posted by EB89

Quote:

Originally Posted by Aus335iguy

I thought this was sold. If EB doesn't take it I will depending on price

Nar I’m good, I like the eBay ones better

If we knew which ones fit well we could organise a group buy see if we cant get the price down

How many people with M Sport front ends would be interested and who is LCI vs pre LCI?

1 Aus335iguy Pre LCI

EB89 · 11-23-2017, 02:58 PM

1 Aus335iguy - PRE LCI
2 EB89 - LCI

Trev88 · 11-23-2017, 03:14 PM

Flow design lip doesn't fit e90 it only fits e92 to fit an e90 you would need to cut the back of the lip to ensure that the body tray has space. If you want them to do something other than just resizing for the excess it's about $1100.

Trev88 · 11-23-2017, 04:55 PM

Quote:

Originally Posted by EB89

1 Aus335iguy - PRE LCI
2 EB89 - LCI

Count me in for a group buy

3. Trev e90 m sport

11-20-2017, 01:17 AM	#1
Twoforty Private First Class 30 Rep 145 Posts Drives: F30 LCI 330i Msport Join Date: Mar 2015 Location: Newcastle, Australia iTrader: (0)	Chinese front lip spoilers? Anyone have any experience with these EBay spoilers? https://m.ebay.com.au/itm/AK-Style-C...-/142399777036 https://m.ebay.com.au/itm/Carbon-Fib...-/252529252445
	Appreciate 0 Tweet Quote

11-20-2017, 02:54 AM	#2
naenae First Lieutenant 187 Rep 333 Posts Drives: 2009 E92 335i DCT FBO Join Date: Nov 2016 Location: Melbourne Australia iTrader: (0)	for that price buy it from mars or euro division. at least you have a place to go back to should it not fit properly.
	Appreciate 0 Quote

11-20-2017, 04:48 AM	#3
aaron_ Captain 96 Rep 671 Posts Drives: E93 335i LCI Join Date: Dec 2015 Location: Sydney iTrader: (0)	I'm interested as well Mars and ED didn't have any for a facelift when I checked
	Appreciate 0 Quote

11-20-2017, 06:11 AM	#4
EB89 Brigadier General 550 Rep 3,127 Posts Drives: 2011 335i e92 DCT Join Date: Sep 2015 Location: Australia, NSW iTrader: (0) Garage List 2011 BMW 335i e92 [0.00]	I’m also interested. I’ve been looking at these a lot recently, https://rover.ebay.com/rover/0/0/0?m...2F191736168394 https://rover.ebay.com/rover/0/0/0?m...2F161899276935 https://rover.ebay.com/rover/0/0/0?m...2F222586500453 Last edited by EB89; 11-20-2017 at 06:16 AM..
	Appreciate 0 Quote

11-20-2017, 01:18 PM	#5
Aus335iguy Colonel 662 Rep 2,140 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Im interested as well but im pre LCI. I dont mind the HM style one but the side bits dont suit the car.. Have you guys checked out FLOW designs ? $375 for the one they have but id prefer a single line along the front and they offered to do a custom job for an extra $75 https://www.flowdesignsaustralia.com...front-splitter __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

11-20-2017, 01:21 PM	#6
Aus335iguy Colonel 662 Rep 2,140 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Or you could get some brackets from HARD and make your own out of a sheet of poly(hard has a splitter but its for a wide body kit) http://www.hardmotorsport.com/hard-m...pport-bracket/ __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

11-21-2017, 05:57 PM	#13
JB4-335 Brigadier General 175 Rep 3,093 Posts Drives: E92 BSM & E70 AW Join Date: Feb 2011 Location: Australia iTrader: (1)	I have this flow design lip for sale. It's brand new never fitted. Comes with all the hardware. Had it done to my specs for an E9X. Sticks out an extra 20mm. Attached Images
	Appreciate 0 Quote

11-21-2017, 08:23 PM	#15
EB89 Brigadier General 550 Rep 3,127 Posts Drives: 2011 335i e92 DCT Join Date: Sep 2015 Location: Australia, NSW iTrader: (0) Garage List 2011 BMW 335i e92 [0.00]	Would be good to see a comparison, I do like this lip with the M Sport bar __________________ / MHD Stage 2+ / AR CATLESS DP / PE MOD 4 INCH TIPS / BMR FMIC / K&N DROP IN / BMS CP /
	Appreciate 1 woosh218.50 Quote

11-23-2017, 02:58 PM	#20
EB89 Brigadier General 550 Rep 3,127 Posts Drives: 2011 335i e92 DCT Join Date: Sep 2015 Location: Australia, NSW iTrader: (0) Garage List 2011 BMW 335i e92 [0.00]	1 Aus335iguy - PRE LCI 2 EB89 - LCI
	Appreciate 0 Quote

11-23-2017, 03:14 PM	#21
Trev88 Lieutenant Colonel 186 Rep 1,543 Posts Drives: 320d e90 LCI Join Date: Jun 2014 Location: Melbourne iTrader: (0)	Flow design lip doesn't fit e90 it only fits e92 to fit an e90 you would need to cut the back of the lip to ensure that the body tray has space. If you want them to do something other than just resizing for the excess it's about $1100.
	Appreciate 0 Quote