Bimmer Performance Center 335d Custom Exhaust

Phil@BPC · 12-04-2017, 12:51 PM

I figured this would be a good little intro as well. I'm the Social Media/ Photographer for Bimmer Performance Center. Some of you may have already seen some of my photos on our Facebook page and/or instagram feed. Im hoping to help keep everyone up to date on the inner workings of the shop here with on going projects, dynos and other misc. I will go ahead and let everyone know Im not going to have every answer for every question. I hope some of the guys will chime in and help out. If you have any questions feel free to ask Ill do my best. Hope you guys enjoy the photos with more to come not only in this section but in others as well.

We had a customer request a full exhaust on his 335 diesel. With very specific details and with very limited options available we knew that fabricating one ourselves was the only option. Our Master Fabricator was excited to take on the challenge and set out to create a one off full stainless exhaust system for the vehicle.

The exhaust system starts from our own in house 3in downpipe which continues all the way to a split 3in In and dual 2.5in Out Y-pipe and tailpipes. A custom mount was made to utilize the factory hanger by the transmission and all other mounts for the stock system were used with new hangers. This allows the use of the factory rubber mounts to ensure vibration and noise is cut down to a minimum. Another item requested by the customer was to make the exhaust easy to remove for future servicing so a v-band assembly was added at the merge for a simple midpipe and tail pipe configuration. To give this 335d a stealth look from behind the factory tips were cleaned and set back into their factory location but moved outwards slightly to help reduce any bumper exhaust build up. Needless to say this is going to be one hot setup !!

_DSC8551

_DSC8557

_DSC8558

_DSC8561

_DSC8562

_DSC8563

_DSC8564

_DSC8565

_DSC8567

_DSC8570

_DSC8572

_DSC8573

_DSC8574

_DSC8575

_DSC8576

_DSC8577

_DSC8578

_DSC8579

_DSC8580

_DSC8581

_DSC8582

_DSC8583

_DSC8584

Owen81 · 12-04-2017, 01:25 PM

Wow, looks great!

32valves · 12-04-2017, 01:56 PM

Holy sh*t that is a clean set-up

digitaldav · 12-05-2017, 12:21 AM

Whats up with this photobucket shit. Unable to view anything there...

Phil@BPC · 12-05-2017, 07:57 AM

Fixed.....

Just breaking parts of the internet one photo at a time...

12-04-2017, 12:51 PM	#1
Phil@BPC Lieutenant 471 Rep 489 Posts Drives: E39 M5/ E30 325is Join Date: Nov 2017 Location: Raleigh, NC iTrader: (0) Garage List 2003 BMW M5 [0.00] 1990 BMW 325is [0.00]	Bimmer Performance Center 335d Custom Exhaust I figured this would be a good little intro as well. I'm the Social Media/ Photographer for Bimmer Performance Center. Some of you may have already seen some of my photos on our Facebook page and/or instagram feed. Im hoping to help keep everyone up to date on the inner workings of the shop here with on going projects, dynos and other misc. I will go ahead and let everyone know Im not going to have every answer for every question. I hope some of the guys will chime in and help out. If you have any questions feel free to ask Ill do my best. Hope you guys enjoy the photos with more to come not only in this section but in others as well. We had a customer request a full exhaust on his 335 diesel. With very specific details and with very limited options available we knew that fabricating one ourselves was the only option. Our Master Fabricator was excited to take on the challenge and set out to create a one off full stainless exhaust system for the vehicle. The exhaust system starts from our own in house 3in downpipe which continues all the way to a split 3in In and dual 2.5in Out Y-pipe and tailpipes. A custom mount was made to utilize the factory hanger by the transmission and all other mounts for the stock system were used with new hangers. This allows the use of the factory rubber mounts to ensure vibration and noise is cut down to a minimum. Another item requested by the customer was to make the exhaust easy to remove for future servicing so a v-band assembly was added at the merge for a simple midpipe and tail pipe configuration. To give this 335d a stealth look from behind the factory tips were cleaned and set back into their factory location but moved outwards slightly to help reduce any bumper exhaust build up. Needless to say this is going to be one hot setup !! _DSC8551 _DSC8557 _DSC8558 _DSC8561 _DSC8562 _DSC8563 _DSC8564 _DSC8565 _DSC8567 _DSC8570 _DSC8572 _DSC8573 _DSC8574 _DSC8575 _DSC8576 _DSC8577 _DSC8578 _DSC8579 _DSC8580 _DSC8581 _DSC8582 _DSC8583 _DSC8584 Last edited by Phil@BPC; 12-05-2017 at 07:56 AM..
	Appreciate 0 Tweet Quote

12-04-2017, 01:25 PM	#2
Owen81 Lieutenant 83 Rep 432 Posts Drives: 335d, 17/22 TDI Join Date: May 2015 Location: Alberta, Canada iTrader: (0)	Wow, looks great!
	Appreciate 0 Quote

12-04-2017, 01:56 PM	#3
32valves Captain 111 Rep 934 Posts Drives: 2011 335d sport Join Date: Mar 2014 Location: DC area iTrader: (0)	Holy sh*t that is a clean set-up
	Appreciate 0 Quote

12-05-2017, 12:21 AM	#4
digitaldav Private First Class 27 Rep 145 Posts Drives: 2009 335d Join Date: Nov 2010 Location: Lansdale, Pa iTrader: (0)	Whats up with this photobucket shit. Unable to view anything there...
	Appreciate 0 Quote

12-05-2017, 07:57 AM	#5
Phil@BPC Lieutenant 471 Rep 489 Posts Drives: E39 M5/ E30 325is Join Date: Nov 2017 Location: Raleigh, NC iTrader: (0) Garage List 2003 BMW M5 [0.00] 1990 BMW 325is [0.00]	Fixed..... Just breaking parts of the internet one photo at a time...
	Appreciate 0 Quote