Anyone want to do some dyno runs.....

brusso · 05-26-2008, 02:46 AM

I currently have a e92 335 with the following mods.....
Proceed V3 pnp w/ remote switching
UR catless dp's
Harman Motive exhaust
Dual Cone intake

I think It would be cool to do some comparisons on a dyno with a few other cars with different set ups....

What do you think and what do you have....
Lets get a dyno day going and post up the results. I think everyone wants to see what a V3 with this set up will do along side some other set ups... AA,JB2 ect.....

Let me hear it.... I"m located in the sfv near the 101 and the 405 fwy's.

UCSBMW · 05-26-2008, 02:51 AM

i'd be down if it's not too far...im from OC though.

335iheLLraiseR · 05-26-2008, 02:54 AM

this should be in the local section.

Lane · 05-26-2008, 02:59 AM

Wouldn't it be interesting to see the figures for your car? Just dyno it and yes, this is the right place to share the dynos

We are virtually very much involved with it globally.

Sneeze · 05-26-2008, 03:21 AM

Pm'd you and my mods...

D0WN4IT · 05-26-2008, 04:01 AM

Quote:

Originally Posted by thr33fivei

Pm'd you and my mods...

Me too..

satinghostrider · 05-26-2008, 04:17 AM

Well fuck 29.2 Progman.

Sam12345 · 05-26-2008, 04:57 AM

I am down.

Juicebox Stage 2
Juicebox X switch
BMS intake

SPEZNAS92 · 05-26-2008, 06:20 AM

dude coldwater and moorpark right here ...lemme know whats up my cars stock and i wanna get a base run before i do anything for comparison.. do you have a shop in mind?

bimmerlex · 05-26-2008, 12:29 PM

I'm right around Ventura and Coldwater Canyon. I'm down for it. I just have SSTT.

Mr. 5 · 05-26-2008, 01:22 PM

I'm going to transfer this to the cali section, but I know of a dyno place in
Westminster and can setup everything. It's where I've done all my dynos.
My best Dyno was with 368 hp and 368 torque on 91 octane.

I just need a list of who's interested so i can get a price of what it would cost everyone each.
It's most likely going to be 40 to 50 cash each.

Mattscott · 05-26-2008, 02:20 PM

Quote:

Originally Posted by Mr. 5

I'm going to transfer this to the cali section, but I know of a dyno place in
Westminster and can setup everything. It's where I've done all my dynos.
My best Dyno was with 368 hp and 368 torque on 91 octane.

I just need a list of who's interested so i can get a price of what it would cost everyone each.
It's most likely going to be 40 to 50 cash each.

Thats not bad, I would like to do this as well.

Sneeze · 05-26-2008, 04:19 PM

Quote:

Originally Posted by Mr. 5

I'm going to transfer this to the cali section, but I know of a dyno place in
Westminster and can setup everything. It's where I've done all my dynos.
My best Dyno was with 368 hp and 368 torque on 91 octane.

I just need a list of who's interested so i can get a price of what it would cost everyone each.
It's most likely going to be 40 to 50 cash each.

Count me in!!!

brusso · 05-26-2008, 05:05 PM

Quote:

Originally Posted by thr33fivei

Pm'd you and my mods...

replied

Quote:

Originally Posted by D0WN4IT

Me too..

replied

Quote:

Originally Posted by Mr. 5

I'm going to transfer this to the cali section, but I know of a dyno place in Westminster and can setup everything. It's where I've done all my dynos.
My best Dyno was with 368 hp and 368 torque on 91 octane.

I just need a list of who's interested so i can get a price of what it would cost everyone each.
It's most likely going to be 40 to 50 cash each.

Thanks for the offer.... I was looking for just a couple of different setups similar to mine to compare but a dyno day is cool too. Westminster is kind of far for us sfv guys but if we could do this on a sunday it's doable for me. Let me know
What days are good for everyone ! I put this in the turbo section because I am looking for people with catless dp's ect.....
Mr.5 let me know what you can do....

bimmerlex · 05-26-2008, 05:19 PM

Quote:

Originally Posted by Mr. 5

I'm going to transfer this to the cali section, but I know of a dyno place in
Westminster and can setup everything. It's where I've done all my dynos.
My best Dyno was with 368 hp and 368 torque on 91 octane.

I just need a list of who's interested so i can get a price of what it would cost everyone each.
It's most likely going to be 40 to 50 cash each.

I'm down for it. Would also prefer weekends though...

Duke · 05-26-2008, 06:52 PM

i just have a V3, but im going to get an intake. sooo what i can do is to a couple of runs without the intake then with to see how the V3 responds to the intake

USCTrojanMan29 · 05-26-2008, 08:33 PM

There's a shop in the Lake Forest area off the 5 but it's a RWD dyno...I'm down to go.

UCSBMW · 05-26-2008, 09:21 PM

Quote:

Originally Posted by USCTrojanMan29

There's a shop in the Lake Forest area off the 5 but it's a RWD dyno...I'm down to go.

dynamic or AMS?

Mr. 5 · 05-26-2008, 11:03 PM

Alright,
So we have:

Mr. 5
Mattscot
thr33fivei
brusso
bimmerlex
xs*****

Here's the thing, He is closed on Mondays and Sundays, but the day he usually does this is Saturdays. I'll give him a call tomorrow and let everyone know the following Saturdays that are open on his schedule.

If anyone else wants to go then just copy paste and add your name on the list.

This is a Dynojet dyno!

What are you guys looking to measure?
Do you want the boost and A to Fs also?
I just need to know what to ask.

Sam12345 · 05-26-2008, 11:15 PM

i want to come as well!!!!!!!! i have JB2X with bms intake

wj4 · 05-26-2008, 11:15 PM

I'm just throwing this out there.. my friend has a shop in Burbank with a Dyno Dynamic AWD machine. This dyno has load barring so the numbers are less than Dynojet and Mustang Dyno. This shop is not a typical 9-5PM, but they open around the customers' schedule. It's not rare to see they do turbo installs at 3AM. They are willing to host this dyno event if you guys want.

Mr. 5 · 05-26-2008, 11:29 PM

Quote:

Originally Posted by wj4

I'm just throwing this out there.. my friend has a shop in Burbank with a Dyno Dynamic AWD machine. This dyno has load barring so the numbers are less than Dynojet and Mustang Dyno. This shop is not a typical 9-5PM, but they open around the customers' schedule. It's not rare to see they do turbo installs at 3AM. They are willing to host this dyno event if you guys want.

Well,
I'll let you guys decide.
I'll call my guy tomorrow and get a price.
We'll go from there.

05-26-2008, 02:46 AM	#1
brusso Second Lieutenant 23 Rep 298 Posts Drives: 08 E92 Join Date: Apr 2007 Location: So.Cal iTrader: (3)	Anyone want to do some dyno runs..... I currently have a e92 335 with the following mods..... Proceed V3 pnp w/ remote switching UR catless dp's Harman Motive exhaust Dual Cone intake I think It would be cool to do some comparisons on a dyno with a few other cars with different set ups.... What do you think and what do you have.... Lets get a dyno day going and post up the results. I think everyone wants to see what a V3 with this set up will do along side some other set ups... AA,JB2 ect..... Let me hear it.... I"m located in the sfv near the 101 and the 405 fwy's. __________________ AA boosted 500+ hp
	Appreciate 0 Tweet Quote

05-26-2008, 02:51 AM	#2
UCSBMW Captain 74 Rep 655 Posts Drives: G05 Join Date: Sep 2005 Location: OC iTrader: (1)	i'd be down if it's not too far...im from OC though. __________________ Ex's: E46 325i, E90 330i, E92 335i, E60 550i, E46 M3, F30 335i, m235i, G30 540i Current: G05
	Appreciate 0 Quote

05-26-2008, 02:59 AM	#4
Lane Several N54 cars, V1,3, V2.0.2, and V3.1 12 Rep 778 Posts Drives: N54s Join Date: Nov 2007 Location: UK DE GR SW iTrader: (0)	Wouldn't it be interesting to see the figures for your car? Just dyno it and yes, this is the right place to share the dynos We are virtually very much involved with it globally.
	Appreciate 0 Quote

05-26-2008, 03:21 AM	#5
Sneeze Captain 35 Rep 793 Posts Drives: 335i Join Date: Jan 2008 Location: LA iTrader: (3)	Pm'd you and my mods...
	Appreciate 0 Quote

05-26-2008, 04:17 AM	#7
satinghostrider Major 185 Rep 1,430 Posts Drives: 2018 F80 M3 ZCP LCI II Join Date: Jan 2007 Location: Singapore iTrader: (1)	Well fuck 29.2 Progman. __________________ 2018 F80 LCI II ZCP ///M3 Mineral White M-DCT\| Sakhir Orange Interior\| \|M Performance Exhaust\|
	Appreciate 0 Quote

05-26-2008, 04:57 AM	#8
Sam12345 Lieutenant Colonel 111 Rep 1,534 Posts Drives: jet black 335i coupe Join Date: Feb 2008 Location: So Cal iTrader: (3) Garage List 2008 335i Coupe [0.00]	I am down. Juicebox Stage 2 Juicebox X switch BMS intake __________________ Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(e90post.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
	Appreciate 0 Quote

05-26-2008, 06:20 AM	#9
SPEZNAS92 First Lieutenant 11 Rep 305 Posts Drives: 2009 135i Join Date: Mar 2008 Location: Studio City iTrader: (2)	dude coldwater and moorpark right here ...lemme know whats up my cars stock and i wanna get a base run before i do anything for comparison.. do you have a shop in mind?
	Appreciate 0 Quote

05-26-2008, 12:29 PM	#10
bimmerlex Captain 85 Rep 895 Posts Drives: 2024 BMW X4M Competition Join Date: Jan 2007 Location: SoCal. iTrader: (25) Garage List 2025 BMW X5 40i M-S ... [9.75] 2024 BMW X4M Compet ... [0.00]	I'm right around Ventura and Coldwater Canyon. I'm down for it. I just have SSTT. __________________ 2025 BMW X5 Xdrive40i M-Sport M-Performance 2024 BMW X4M Competition 2025 BMW M340i xDrive M-Sport M-Performance
	Appreciate 0 Quote

05-26-2008, 01:22 PM	#11
Mr. 5 Modder Raider 838 Rep 8,633 Posts Drives: M3 Join Date: Apr 2007 Location: Surf City, HB iTrader: (31) Garage List 2007 e90 335i [8.00]	I'm going to transfer this to the cali section, but I know of a dyno place in Westminster and can setup everything. It's where I've done all my dynos. My best Dyno was with 368 hp and 368 torque on 91 octane. I just need a list of who's interested so i can get a price of what it would cost everyone each. It's most likely going to be 40 to 50 cash each. __________________ e36 M3 Coupe, e36 325i Sedan e90 335i--SOLD Best 60-130-------------9.15 Seconds------------------WWW.MR5RACING.COM
	Appreciate 0 Quote

05-26-2008, 06:52 PM	#16
Duke Lieutenant 16 Rep 510 Posts Drives: E92 335i Join Date: Feb 2008 Location: The Hills next to CHINO iTrader: (1)	i just have a V3, but im going to get an intake. sooo what i can do is to a couple of runs without the intake then with to see how the V3 responds to the intake
	Appreciate 0 Quote

05-26-2008, 08:33 PM	#17
USCTrojanMan29 Captain 37 Rep 898 Posts Drives: Purple People Eater Join Date: Nov 2007 Location: Around iTrader: (2)	There's a shop in the Lake Forest area off the 5 but it's a RWD dyno...I'm down to go.
	Appreciate 0 Quote

05-26-2008, 11:03 PM	#19
Mr. 5 Modder Raider 838 Rep 8,633 Posts Drives: M3 Join Date: Apr 2007 Location: Surf City, HB iTrader: (31) Garage List 2007 e90 335i [8.00]	Alright, So we have: Mr. 5 Mattscot thr33fivei brusso bimmerlex xs***** Here's the thing, He is closed on Mondays and Sundays, but the day he usually does this is Saturdays. I'll give him a call tomorrow and let everyone know the following Saturdays that are open on his schedule. If anyone else wants to go then just copy paste and add your name on the list. This is a Dynojet dyno! What are you guys looking to measure? Do you want the boost and A to Fs also? I just need to know what to ask. __________________ e36 M3 Coupe, e36 325i Sedan e90 335i--SOLD Best 60-130-------------9.15 Seconds------------------WWW.MR5RACING.COM
	Appreciate 0 Quote

05-26-2008, 11:15 PM	#20
Sam12345 Lieutenant Colonel 111 Rep 1,534 Posts Drives: jet black 335i coupe Join Date: Feb 2008 Location: So Cal iTrader: (3) Garage List 2008 335i Coupe [0.00]	i want to come as well!!!!!!!! i have JB2X with bms intake __________________ Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(e90post.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
	Appreciate 0 Quote

05-26-2008, 11:15 PM	#21
wj4 Major General 362 Rep 7,719 Posts Drives: E90 manual 335i Join Date: Nov 2006 Location: Burbank, CA iTrader: (8)	I'm just throwing this out there.. my friend has a shop in Burbank with a Dyno Dynamic AWD machine. This dyno has load barring so the numbers are less than Dynojet and Mustang Dyno. This shop is not a typical 9-5PM, but they open around the customers' schedule. It's not rare to see they do turbo installs at 3AM. They are willing to host this dyno event if you guys want.
	Appreciate 0 Quote