[cvc 22349a]

The factory seems to put grease everywhere under and along the perimeter of the hood and engine compartment. Any safe products out there to get rid of it? I searched to no avail. TIA

[L~R~G nor cal]

The safest product for the engine bay would be P21s Total Auto Wash. I think or forum sponsor DetailedImage.com sells it, and you can also receive a discount for being a forum member.

Here is the link for P21s TAW
http://www.detailedimage.com/P21S-M1...Auto-Wash-P87/

What you want to do is:

1. Make sure the engine bay is cool. If you drove the car recently you will want to wait a bit to cool the engine off.
2. Rinse with water
3. Spray P21s TAW everywhere and let it sit for 5-15min
4. Use a soft brush and scrub the everywhere
5. Rinse
6. Repeat 2 through 5 if necessary
7. Wipe everything to make as dry as possible and leave the hood open tell the remaining areas are dry.
8. Dress the plastic with a water based dressing product like AeroSpace Protectant
Here is the link for AeroSpace Protectant:
http://www.detailedimage.com/303-M2/...rotectant-P12/
9. Use a Quick Detailer, or even a sealant for the painted/metal sides on the fender and the hood if you feel like going the extra yard to protect your engine bay

Hope this helps!

Jared

[cvc 22349a]

Thanks for the info Jared.