[Coupes33]

As I have installed a M3 diff, axles and driveshaft, I have no further need for the Large Pumpkin 3.46 ratio Diff which is fitted with a Quaife LSD. The Diff has only done 35,000kms from brand new. The cost of these items new were :-
Brand New Diff - $2,949
Quaife LSD- $1,925
Installation of LSD- $526
TOTAL- $5,400

Asking price is $2,000 + Freight. Diff is in excellent condition.

[Socket]

Great deal mate

[Kalsharith]

Would this be a "bolt and play" installation? or would it require further changes to stock tail shaft etc?

Cheers

[vtl]

Originally Posted by Kalsharith

Would this be a "bolt and play" installation? or would it require further changes to stock tail shaft etc?

Cheers

You might need the axles as Coupes car is a large diff vs your small one. Otherwise its plug and play

[Coupes33]

Originally Posted by Kalsharith

Would this be a "bolt and play" installation? or would it require further changes to stock tail shaft etc?

Cheers

As Vince stated, the axles maybe an issue. But having said that, I looked up Realoem.com and the part numbers are the same for my axles (Sept 2006) and the 2008 model axles. This would need some clarification. Try putting your VIN number in and see what axles you have. By Realoem.com, my axles are RHS - 33207568730 and Left - 33207568731.

[Kalsharith]

Coupes33 any idea on shipping costs to Melbourne?

My current diff is a different part number (see pic) and slightly different housing/axle hubs I think.

But I am interested, just need to work out if I need to also pick up some new rear axles.

Update: Just checked my VIN on RealOEM and its coming up with the same part numbers as yours which would suggest they should be okay.

[Coupes33]

I have just measured the distance between the hubs where the axles bolt to the diff and it is 285mm. Check if yours is the same because if it is, there should be no problem with the axles. The diameter of the hubs on the diff that the axles bolt to is 103mm. I will check how much to freight to Melbourne. What is your post code? The diff on its own weighs 40kg but I will have to attach it to a small pallet for transport.

[Kalsharith]

Originally Posted by Coupes33

I have just measured the distance between the hubs where the axles bolt to the diff and it is 285mm. Check if yours is the same because if it is, there should be no problem with the axles. The diameter of the hubs on the diff that the axles bolt to is 103mm. I will check how much to freight to Melbourne. What is your post code? The diff on its own weighs 40kg but I will have to attach it to a small pallet for transport.

PM’ed you my details.

Cheers

[JimiP]

if this is still available im keen.. pm'd