|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Wrecked 2008 E90 335i 6 speed Part Ou
|
|
04-07-2018, 08:39 AM | #1 |
Enlisted Member
1
Rep 39
Posts |
Wrecked 2008 E90 335i 6 speed Part Ou
CAR IS SOLD. ALL PARTS ARE GONE. Located in Louisville KY. Parting out my baby. I loved and pampered this car dearly until some jackass pulled out 10 feet in front of me while I was doing 35. I never had time to hit the brakes and I t-boned him at speed. I haven’t tried to start the car since the wreck. So I am unsure on the condition of the engine. It looked like the front of the engine was touching some of the structural components in the front of the car, so I erred on the side of caution and never attempted to even crank it over. The engine ran perfectly prior to the wreck, no misfires, no stumbling at idle, no sounds, no leaks, no oil consumption between changes every 3k miles. I only ran Red Line 0-40 in this car. Owned since 60k miles. Car has mostly been garaged and always pampered by every owner. Parts are sold as is without any garrantees or warranty. Car currently has approximately 129,000 miles. I will try to list new parts as well as upgrades with the mileage at which they were installed (you will need to do the math). I will only ship the parts that are easily packaged. I will not ship wheels, LSD, etc... Make me offers for anything you need. Please keep the offers reasonable. New OEM parts: - all 6 injectors upgraded to index 12 at 110k SOLD - new coil packs at 110k - M3 steering wheel 110k SOLD - all new O2 sensors at 110k - zhp weighted shift knob with leather boot SOLD - leather parking brake boot with perforated leather handle. - Black line tail lights SOLD Original OEM options: - auto folding, auto dimming side view mirrors - folding mirror window switch - homelink rear view mirror with integrated compass - dual 12 VDC outlet for the rear of the center console Aftermarket Parts: - Mfactory LSD (helical) factory gearing in a large pumpkin (I will yank this, but I won’t ship it) factory diff is available too. - VMR 710 wheels, 18x9.5 33 rear, 18x8.5 35 front gun metal - Michelin PSS front, practically brand new, installed around 125k - Michelin PS3 rear, installed around 105k - PS2 turbos, no rattles, no oil or smoke, never had one issue with these. Installed at 110k and ran on an 18 psi daily pump tune, occasionally ran up to 27 psi on straight e85 (I am not pulling these yet, and I may leave them on the car as my knee and back can’t do 40 hours to get them out). - stage 3 Precision Raceworks LPFP with harness, relay, and Hobbs switch at 120k SOLD - stage 2 Fuel It LPFP bucket assembly. Didn’t support more than 550 WHP. SOLD - JB4 G5 iso, running BEF for all tunes and triggering Port Injection at 110k - Fuel-It Port Injection system, with BMS controller at 120k SOLD - VRSF nokat downpipes at 110k (staying on the car for now) - VRSF charge pipe for recirc valves 110k SOLD - Forge diverted valves 110k SOLD - BMS DCF 110k - BMS high load/boost oil catch can at 110k SOLD - RB low load/boost oil catch can system with head plugs SOLD - Koni FSD shocks all around at 110k - N20 tmap with adapter harness SOLD Car is SG Metallic with Black sport seats (leatherette). All are in good shape except the drivers side bolster is ripped. Rear is split folding with the ski pass through. Make me offers. Last edited by Jewbaaca95; 04-23-2018 at 10:10 AM.. |
04-07-2018, 10:23 AM | #3 |
Major
1184
Rep 1,505
Posts
Drives: 2011 BMW 328i (E91) Touring
Join Date: Mar 2018
Location: Michigan
|
Where are you located, in case of pickup?
Also, pm sent
__________________
Instagram: @4doors
Current: 2011 E91 328i M-Sport Touring Past: 2008 E90 335xi 1996 E36 328i Sport |
Appreciate
0
|
04-07-2018, 11:39 AM | #6 |
First Lieutenant
53
Rep 310
Posts |
|
Appreciate
0
|
04-07-2018, 12:28 PM | #7 |
Muwiee
19
Rep 178
Posts
Drives: 07 335i '12 335i
Join Date: Mar 2015
Location: California, MD
|
I'm interested In the fuel injectors
|
Appreciate
0
|
04-07-2018, 03:52 PM | #8 |
Enlisted Member
1
Rep 39
Posts |
Everyone please bear with me. I do have a life outside of this forum. I also travel a bunch for work, and I’m on the road this entire week from the 9th to the 13th. So if you asked for a price on something and don’t pay me before noon on the 8th, I probably won’t have enough time to pull the part, box it, and get it ready for my wife to ship while I’m gone.
|
Appreciate
0
|
04-07-2018, 04:24 PM | #9 | |
Major
447
Rep 1,060
Posts |
Quote:
__________________
JB4 Tune, MHD backend flash, E85
VRSF 7" Intercooler, BMS OCC VRSF CP & TIAL 50mm BOV, BMP PI DocRace 6266 single turbo. |
|
Appreciate
0
|
04-07-2018, 05:58 PM | #10 |
Enlisted Member
1
Rep 39
Posts |
|
Appreciate
0
|
04-08-2018, 09:35 AM | #14 |
Private
10
Rep 55
Posts |
Was reading through your post and i noticed that you said the RB catch can is for the high side and bms catch can for the low side? I thought it was the other way around. RB's kit for the low side and BMS catch can for the high side. Maybe im mistaken?
|
Appreciate
0
|
04-08-2018, 10:54 AM | #15 | |
Enlisted Member
1
Rep 39
Posts |
Quote:
The RB design draws on vacuum created under deceleration and/or partial low load throttle. The BMS design is used the draw vacuum under higher load situations. I had both running for a while and the RB system collected 10 times the amount of blow by that the BMS system did. Probably due to the the fact that I spent 10 times the amount of time in partial or low load driving. |
|
Appreciate
0
|
04-09-2018, 05:47 AM | #20 |
Muwiee
19
Rep 178
Posts
Drives: 07 335i '12 335i
Join Date: Mar 2015
Location: California, MD
|
Has anyone done any business with this guy? I see 0 rep points and low post. Tried do deal with fuel injectors but didn't want to take pics unless he had money first. Not saying that's bad but done many deals and with rash of scammers lately can't be to safe. So any info would be great. Not trying to put anyone down just stating facts and trying to get info before I do any deals. Thanks.
|
Appreciate
0
|
04-09-2018, 03:10 PM | #21 |
Registered
0
Rep 2
Posts |
Hey mate sorry to hear about your accident, real shame. How much would you be asking for the BMS occ, shift knob, and passenger side mirror? New here so no idea how to pm :s
|
Appreciate
0
|
04-09-2018, 08:55 PM | #22 | |
Enlisted Member
1
Rep 39
Posts |
Quote:
I told him I wasn’t going to remove them to take pics until I’m paid. I sent pics of the injectors still in the car. I’m not in the business of doing something for nothing. Get over it. And yes, all the items listed as SOLD were done so through this site. Only two of them should still be in transit. |
|
Appreciate
0
|
Bookmarks |
|
|